藤川伝導機 List of Products and Services

The "JPM-ND" is a magnet for aluminum frames. By lightly tightening the grab screw, the tip is pressed against the aluminum frame, preventing the magnet from moving vertically. Using nuts designed for aluminum frames can further prevent the movement of the magnet. 【Features】 ■ Allows doors, covers, tools, and accessories to be attached to aluminum frames with magnets. ■ Can be mounted at any position due to the plastic spring plate on the side. ■ The main body can be removed from the aluminum frame by loosening the grab screw and sliding it. *For more details, please download the PDF or feel free to contact us.

• magnet

The "RBE" is a bracket designed for using actuators in a vertical position. There are two standardized types: one that attaches from the front using the through hole inside the actuator, and another that attaches from the back using the screw holes of the actuator. Additionally, it guarantees a flatness of 0.05mm or less and a perpendicularity of 0.05/100mm or less. 【Features】 ■ High rigidity with a three-rib structure, allowing the actuator to perform at its best ■ Made of cast iron with a monolithic structure, making it robust ■ Multiple screw holes or counterbore holes for fixing, allowing for the installation of actuators at different heights or with varying strokes *For more details, please download the PDF or feel free to contact us.

• bracket

The "PLX" is an index plunger that can be used for indexing and positioning. If the screw of the main body is long in relation to the mounting part, please use the index plunger collar "PXCS" to adjust the screw-in length. Additionally, there are options available such as the nickel-plated "PLXS" and the all-stainless steel "PLXS-S-A4" made of SUS316. 【Features】 ■ Two standard stroke lengths for each pin diameter (excluding pin diameters: φ10, φ12, φ16) ■ Usable for indexing and positioning ■ Pins are hardened and have excellent wear resistance ■ PLX-A-RD and PLX-AK-RD have red knobs, enhancing visibility and can be used to clarify operational areas and work procedures *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PLY" is an index plunger that can be locked in a retracted state by pulling the knob and rotating it 90°. To release the lock, simply pull the knob slightly and rotate it 90°. It will return to its original position with the help of an internal spring. The locking mechanism is built into the knob, and its overall length is the same as the "PLX," which does not have a locking mechanism. Additionally, there are options such as the wear-resistant "PLYS" and the "PLYS-A4," which allows for the selection of the presence or absence of a lock nut. 【Features】 ■ Standardization of two types of strokes for each pin diameter (excluding pin diameters: φ10, φ12, φ16) ■ Pins are hardened and have excellent wear resistance ■ PLY-A-RD and PLY-AK-RD have red knobs, enhancing visibility and can be used to clarify operation points and work procedures ■ The product code allows for the selection of the presence or absence of a lock nut and the color of the knob *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PWKS" is an index plunger with a key lock. By sliding the cover of the keyhole with a dedicated key and inserting the key, the pin can be locked by rotating it 180°. There are two types available: one that can only be locked when the pin is extended, and another that can also be locked when the pin is retracted. The key lock type and the presence of a lock nut can be selected based on the product code. 【Features】 ■ Index plunger with a key lock ■ Slide the cover of the keyhole with a dedicated key, insert the key, and rotate it 180° to lock the pin ■ Locking prevents unintended operations *For more details, please download the PDF or feel free to contact us.

• Other machine elements

"POPS" is a pneumatic type index plunger that can be used in locations where automation of equipment or manual operation is difficult. There are two types: a double-acting type that performs both pin retraction and extension pneumatically, and a single-acting type that performs either pin retraction or extension pneumatically. These can be selected based on the product code. Under normal conditions, "POPS-AK" has the pin retracted, while "POPS-EK" has the pin extended. 【Features】 ■ By attaching a sensor, the state of the pin can be monitored electrically. ■ Can be used for enhanced safety, labor-saving, and automation. ■ A magnet-type dual sensor can detect both the retraction and extension states of the pin. ■ When the sensor detects the set position of the pin, an LED lights up, allowing confirmation of the pin's retraction and extension states with two LEDs. *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PLXS-SN" is an index plunger with a sensor. It features a knob with an integrated magnet for sensor detection, which is part of a pin structure. The sensor state switches and outputs a signal when the stroke exceeds approximately 2/3 from the retracted position of the pin. Additionally, there is a "PLYS-SN" that allows you to lock the pin in the retracted position by pulling the knob and rotating it 90°. 【Features】 ■ Enables electrical monitoring of the pin's state ■ The sensor's LED lights up when the pin is extended ■ Can be used for enhanced safety, labor-saving, and automation ■ The pin is nickel-plated and has excellent wear resistance ■ Comes with a lock nut, sensor, sensor clip, and hex wrench in addition to the index plunger body *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PXPS-A4" is a push-button type index plunger. When the button is pressed, the pin is retracted into the body by the force of the built-in spring. Pressing the button again allows the pin to lock in an extended position. The pin is heat-treated for excellent wear resistance. Additionally, there is an all-stainless steel version made of SUS316, called "PXPS-S-A4." 【Features】 ■ Pressing the button retracts the pin into the body using the force of the built-in spring. ■ Pressing the button again allows the pin to lock in an extended position. ■ Metal parts are made of SUS316, which has superior corrosion and chemical resistance compared to SUS304. ■ The pin is heat-treated for excellent wear resistance. ■ The presence or absence of a lock nut can be selected based on the product code. *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PLX-G/PLXS-G" is a knobless type of index plunger. The pins are either hardened (made of steel) or nickel-plated (made of stainless steel). They have excellent wear resistance. Additionally, if the screw of the main body is long in relation to the mounting part, please use the index plunger collar "PXCS" to adjust the screw-in length. 【Features】 ■ Two standard stroke lengths for each pin diameter ■ Usable for indexing and positioning ■ Pins are either hardened (made of steel) or nickel-plated (made of stainless steel), offering excellent wear resistance ■ The material of the main body and the presence of a lock nut can be selected based on the product code *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PHDXS-VH" is a hygienic design index plunger for thin plates. Both sides of the mounting plate and all sliding parts are sealed, preventing foreign substances and liquids from entering the gaps inside the index plunger and at the mounting surface. Additionally, there are options such as the "PHDYS-VH" with a locking mechanism and the "PHDXS-FH," which excels in corrosion resistance and chemical resistance. 【Features】 ■ Complies with guidelines set by EHEDG (European Hygienic Engineering & Design Group) ■ Uses SUS316 for metal parts, which has superior corrosion and chemical resistance compared to SUS304 ■ Surface finish is less than Ra0.8μm, providing excellent cleanability ■ Usable temperature: -20℃ to 110℃ *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PFAX" is an index plunger with a flange that allows for pin removal and attachment. Additionally, we offer the "PFAY," which features a locking mechanism and is a pin removal type, as well as the "PFLX," which has a nickel-plated pin that excels in wear resistance. Furthermore, we also have the "PFLY," which can be locked in a retracted pin state by pulling the knob and rotating it 90°. 【Features】 ■ Index plunger with removable pin ■ Easy to perform additional processing on the pin tip by removing the pin ■ The pin is secured with the included hex socket cap screw ■ Hex socket bolts are used for mounting to equipment and devices *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PPLX" is a high-precision flange-mounted index plunger. When used in combination with positioning pin bushings PJA/PJB, it allows for more precise positioning. Additionally, there is also a high-precision flange-mounted index plunger "PPLY" with a locking mechanism. 【Features】 ■ Index plunger that enables accurate positioning ■ Two standard pin lengths for each pin diameter ■ Pin diameter tolerance is h6, and the recommended tolerance for the corresponding hole is F7 ■ When used in combination with positioning pin bushings PJA/PJB, it allows for more precise positioning *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PGX" is a slim-structured index plunger designed for tight spaces. Normally, the pin protrudes from the main body, and when the lever is pulled, the pin retracts into the body. When the lever is released, the pin extends from the body due to the force of the built-in spring. We also offer other index plungers with different materials and finishes, such as "PGXS," "PGY," and "PGYS." 【Materials and Finishes】 ■ Lever: Steel, trivalent chromate treatment ■ Body: Steel, trivalent chromate treatment ■ Pin: Steel, trivalent chromate treatment ■ Spring: SUS301 ■ Lock nut: S45C, trivalent chromate treatment *PGX-AK *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "PXBS" is an index plunger that operates the entry and exit of pins by pressing a button. Since the operation is restricted by the button, it prevents accidental operations. The locking mechanism is built into the knob section, so there is no impact on the locking mechanism from dirt or foreign objects. Normally, the pin is locked in the extended position, and when the button is pressed while pulling the knob, the pin retracts. When the knob is released, the pin returns to its original position and locks due to the force of the built-in spring. 【Material and Finish】 ■ Knob: Nylon 6 (matte black) ■ Button: Polyacetal (red) ■ Body: SUS303 ■ Pin: SUS303 nickel-plated ■ Lock nut: SUS304 *PXBS-AK *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "MOC" is an Oldham-type flexible coupling. The spacer is made from environmentally friendly recycled carbon fiber reinforced resin. The hub and spacer allow for significant eccentricity and angular misalignment due to slippage. It complies with the group standard (TES 1403) of the Japan Machine Tool Builders' Association. Additionally, we also offer the Oldham-type and clamping-type flexible coupling "MOC-C," among others. 【Material and Finish】 ■ Hub: A2017 anodized ■ Spacer: Recycled carbon fiber reinforced polyacetal ■ Hex socket set screw: SCM435 with black trivalent chromium plating ■ Hex socket bolt: SCM435 with black trivalent chromium plating *For more details, please download the PDF or feel free to contact us.

• Coupling

The "LWAF" is a cam lever (with a male thread) that quickly tightens and releases through the up and down motion of the lever. It features a structure that completely secures the lever part and the pin, enhancing durability. Even with repeated use, there is no occurrence of play due to wear on the contact surfaces of the lever part and the pin. Additionally, we offer all-stainless steel cam levers (with male threads) such as "LWAFS-ANI" and stainless steel cam levers (with male threads) like "LWAFS-NI." [Colors of the lever part] ■ Matte black ■ Orange ■ Silver gray ■ Red *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "LWBF" is a cam lever (with a male thread) that quickly tightens and releases through the up and down motion of the lever. It features a structure that completely secures the lever and pin, enhancing durability. Even with repeated use, there is no occurrence of play due to wear on the contact surfaces of the lever and pin. Additionally, we also offer all-stainless steel cam levers (with a male thread) "LWBFS-ANI" and stainless steel cam levers (with a male thread) "LWBFS-NI." 【Colors of the lever】 ■ Matte black ■ Orange ■ Silver gray ■ Red *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "FGBD-E-NBR" is a rubber bumper that incorporates screws for installation. It is easy to install on devices and machinery. It features a male thread type on one side, and the threaded part is made of steel. The rubber used is NBR. It is suitable for shock absorption and vibration damping applications. Additionally, we also offer silicone rubber bumpers "FGBDS-E-SI" and rubber bumpers with a tapered shape (both sides with male threads) "FGBE-EE." 【Materials and Finish】 ■ Main body: NBR rubber Shore A hardness 55±5 ■ Threaded part: Steel with trivalent chromate treatment ■ Cover sheet: Steel with trivalent chromate treatment *For more details, please download the PDF or feel free to contact us.

• Other machine elements

We offer the point plate 'FPP' for use in combination with scale plates and scale stickers. It comes with adhesive tape. Please attach it directly to the machine or equipment for use. There are two color variations available, which can be selected based on the suffix of the part number. Additionally, we also handle point stickers 'FPS' and scale plates (horizontal) 'FSP', as well as scale plates (vertical) 'FSP-V'. 【Material and Finish】 ■Main body: SUS304 ■Weight ・FPP/0.8g ・FPP-BK/0.8g *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "KGLF" is a plastic three-lobe knob with a large diameter for the knob screw type. It has a shape that is easy to apply force to, and the screw part is made of brass, allowing for the selection of a cap or no cap based on the product code. The version without a cap has a through hole. Additionally, we also offer plastic mini knobs "KIM/KIMS/KIF/KIFS" and dimple knobs "KRM/KRMS/KRF/KRFS/KRR." 【Cap Colors】 ■ Matte Black ■ Matte Blue ■ Matte Orange ■ Matte Red ■ Matte Silver ■ Matte Yellow *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "KCWFS-A4" is an all-stainless steel wing knob equivalent to SUS316, known for its excellent corrosion resistance. It allows for easy clamping and securing of parts without the use of tools. The design is ergonomic, making it easy to apply force. Additionally, we offer other products such as the cross knob (female thread) "KJFS-K-A4-HP," the cross knob (male thread) "KJMS-A4-HP," and the stainless steel hand knob "KMDFS." 【Product Lineup (Partial)】 ■KCWFS-32-M5-A4 ■KCWFS-32-M6-A4 ■KCWFS-40-M6-A4 ■KCWFS-40-M8-A4 ■KCWFS-50-M8-A4 *For more details, please download the PDF or feel free to contact us.

• Other machine elements

"KIGMS" is a plastic mini knob with a thrust pad attached to the screw tip. The screw part is made of stainless steel, which has excellent corrosion resistance. The thrust pad can tilt up to 15° relative to the screw part. It is effective when the surface of the workpiece is uneven or tilted. Additionally, we also offer the seven-lobe knob "KSGMS" with a thrust pad. 【Material and Finish】 ■ Knob: Nylon 6 (black) ■ Screw part: SUS303 ■ Thrust pad: Polyacetal (matte black) or SUS303 ■ O-ring: Fluoro rubber *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "KTCLF" is a knob equipped with a torque limit mechanism that allows for the management of tightening torque. The set torque is standardized into three types based on the outer diameter of the knob. If you turn it in the tightening direction with a torque greater than the set torque, the knob will slip, preventing any further tightening. Additionally, we also offer the torque control knob "KTCLM." 【Material and Finish】 ■ Main Body Glass: Fiber-reinforced Nylon 6 (matte black) ■ Screw Part: SUM22L with a black iron oxide coating ■ Cap: Nylon 6 (light gray) *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "KCWFS-A4-HD-E" is a hygienic design wing knob. It allows for easy clamping and securing of parts without the use of tools. The ergonomic shape makes it easy to apply force, and it is made of stainless steel equivalent to SUS316, which has excellent corrosion resistance. Additionally, we also offer the hygienic design stainless steel T-knob "KTEFS-A4-HD-E." 【Features】 ■ Sealing the gap on the mounting surface with the sealing ring "FSRN-HD-E" ■ Surface finish is less than Ra0.8μm ■ The sealing ring is made in a light blue color for easy identification with food ■ Made from materials that comply with the standards of the U.S. Food and Drug Administration (FDA) ■ Complies with the guidelines set by EHEDG (European Hygienic Engineering & Design Group) ■ Usable temperature: -40℃ to 120℃ *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "KDMS-SC" is a dimple knob designed to prevent detachment. It is suitable for preventing foreign object contamination in food machinery and for compliance with CE marking. The recessed outer edge enhances operability. The color of the knob can be selected based on the suffix of the part number, with white being suitable for use in medical devices. Additionally, we also offer the detachment-preventing stainless steel wing knob "KNWMS-SC" and the stainless steel hand knob (male thread) "KSCHM." 【Product Lineup】 ■KDMS-16-M4-SC ■KDMS-20-M5-SC ■KDMS-25-M6-SC ■KDMS-32-M8-SC *For more details, please download the PDF or feel free to contact us.

• Other machine elements

The "AH-2E-AG" is a flat-type aluminum (silver-plated) torque hinge. Due to its silver plating, it has excellent aesthetics and allows the panels to be folded together without gaps when closing. Additionally, there are other options available, such as the aluminum "AH-2E-AL," the aluminum (black anodized) "AH-2E-BK," and the stainless steel "AH-2E-SS." 【Features】 ■ Holds the panel at any angle in a desired position ■ In a test of 20,000 open and close cycles, the variation in holding torque is within ±20% ■ Comes with four hex socket flat head screws (made of SUSXM7) as an option ■ Excellent aesthetics due to silver plating ■ No unevenness at the joint area *For more details, please download the PDF or feel free to contact us.

• Other machine elements

This booklet introduces a wealth of technical information and case studies that serve as hints for solving customer challenges. We present issues and solutions related to food manufacturing machinery such as filling machines, meat and fish processing machines, and cartoners. It is a valuable resource, so please take a moment to read it. 【Contents】 ■ Key industry trend information to keep in mind ■ Case studies for problem-solving found through machinery ■ Solutions to challenges in food machinery, introduction of NBK products *For more details, please download the PDF or feel free to contact us.

• Other food machinery
• Food Packaging Machinery
• Other packaging machines

This booklet introduces various concerns raised by customers in the field of semiconductor manufacturing, along with case studies of their solutions and a wealth of technical information. We present examples found from equipment, manufacturing processes, and environments, as well as special cases where flexible development capabilities have resolved various challenges. This is a reference book worth reading, so please take a look. 【Contents (Excerpt)】 ■ Industry Trends ■ Case Studies of Problem Solving from Equipment ■ Case Studies of Problem Solving from Manufacturing Processes ■ Case Studies of Problem Solving from Environment ■ Solving Challenges with Development Capabilities, Special Cases *For more details, please download the PDF or feel free to contact us.

• Other semiconductor manufacturing equipment

The "Mitsubishi Hoist UG Type" is a product that has achieved improved usability through full inverterization of its compact model. It offers peace of mind and safety with its load sway prevention feature, as well as reduced tact time. The light load high-speed function and overload prevention function are realized without sensors. Immediate delivery is possible due to standard stock of general-purpose inverters, and parts replacement is also easy, reducing downtime. Even for standard products that are out of stock, a shipping system that can deliver in approximately 20 working days is in place. 【Features】 ■ Lifting function ■ Lifting brake motor ■ Inverter ■ Traversing function ■ Reduction gear ■ Lifting limit switch *For more details, please download the PDF or feel free to contact us.

• Transport and handling robots

The "CG-B/U series" features a structure that grips the crane running rail from both sides with claw-like components, making it a device that is difficult to disengage from unexpected external forces. It reduces the risk of crane derailment and sudden drops during events such as earthquakes. This series is widely used by many customers and ensures high safety on site. Please feel free to contact us when you need assistance. 【Features】 ■ Structure that minimizes contact between the rail and claw components ■ Claw components accommodate lateral undulations of the rail ■ Easily attachable to existing cranes without modification ■ Additional installation possible on box structures or saddle end faces with covers *For more details, please download the PDF or feel free to contact us.

• Other safety equipment

This catalog introduces "ANYTELECON," developed by professionals who have been involved in the telecommunications industry for many years, focusing on wireless remote control devices. It clearly presents product features, specifications, dimension diagrams, and more. Additionally, it includes information about after-sales service and a prompt support system, so please take a moment to read through it. [Contents (Excerpt)] ■ Benefits of Wireless Technology ■ Features of ANYTELECON ■ Set Configuration and Specifications List ■ FZ Series GZ Series AZ Series (10-point Switch Transmitter) ■ FZ Series GZ Series AZ Series (12-point Switch Transmitter) ■ FZ Series GZ Series AZ Series (16-point Switch Transmitter) *For more details, please download the PDF or feel free to contact us.

• Remote Control

The "Octopus" is a wireless remote control device equipped with a communication technology that utilizes frequency hopping in the 920MHz band, making it less susceptible to radio interference from the same frequency. It adopts the same switch mechanism as the FZ, GZ, and AZ series, which are well-known for their light switch feel and good stroke. It can continuously transmit for about 150 hours with alkaline batteries. Rechargeable nickel-metal hydride batteries available on the market can also be used. 【Features】 ■ Resistant to interference ■ Settings for double pressing even with a small number of buttons ■ Protective structure that covers the sides ■ Inherits the switch operation feel of the current series *For more details, please download the PDF or feel free to contact us.

• Remote Control

The "F Series" is a wireless remote control device that allows for clear tactile feedback even when investigating with leather gloves. It is possible to install an emergency stop push-pull switch, enabling compliance with factory and site guidelines. Additionally, by installing a specially developed key switch, we assist in the operational management of the transmitter. 【Evolution (Excerpt)】 ■ Stress-free operation feel ■ Shutdown of the transmitter's power (emergency stop switch) ■ Safe and secure operational management with a key entry system ■ Select latch ■ Increased output relay capacity (compared to PR00D) ■ Wiring work made even easier *For more details, please download the PDF or feel free to contact us.

• Remote Control

This catalog introduces the NITTAOMEGA series, an automatic tool changer manufactured by Nitta, which employs a cam lock mechanism. It features various products such as the "NITTAOMEGA type S10," which achieves compactness and lightweight design, and the "NITTAOMEGA type S35-S," which eliminates the need for a mounting plate and achieves a slim profile. Detailed information on each product's features, applications, and specifications is provided, so please make use of it when selecting products. [Contents] ■ NITTAOMEGA product lineup ■ NITTAOMEGA series ■ Other products ■ Additional product information, etc. *For more details, please download the PDF or feel free to contact us.

• Transport and handling robots

"SOFTmatics" is a product that achieves smooth movement with its unique gripping mechanism. By gently handling with flexible urethane material, it is possible to hold delicate workpieces without causing damage. You can choose grippers of different sizes and finger shapes to match the workpiece. Please feel free to contact us when you need assistance. 【Features】 ■ Capable of gripping workpieces that were previously difficult to grasp ■ 13 types of grippers available for different workpieces ■ Hygienic grippers allow direct handling of food ■ Tool-less attachment and detachment mechanism for easy maintenance ■ Total weight of less than 1.0 kg made of aluminum material ■ Consumables are available for repair *For more details, please download the PDF or feel free to contact us.

• Transport and handling robots

This product is a coupling that can complete maintenance work, which usually takes several hours, in just a few minutes. The specially designed inserts come in four types that can be selected based on application. They also excel in chemical resistance and can be used across a wide range of temperatures. By maximizing the capabilities of the resin, it has specifications that can accommodate many gear coupling applications with standard products. 【Features】 ■ Reduction of downtime with minimal maintenance labor ■ Replaceable with many gear couplings ■ No lubrication required & no hub replacement ■ Excellent inserts *For more details, please download the PDF or feel free to contact us.

• Coupling

The "LEMS-MD" is a practical clamp lever featuring a serration ring made of zinc die-cast, integrated into a plastic lever body. It is compatible with metal detection. By mixing metal powder into the resin of the lever part, it can be detected by metal detectors, reducing the risk of foreign matter contamination. Additionally, we also offer another practical clamp lever (female thread) "LEFS-MD." 【Materials and Finishing】 ■ Lever part: Nylon 6, iron-based components (blue-gray) ■ Thread part: SUS303 ■ Set screw: Stainless steel ■ Serration ring (insert): Zinc die-cast ■ Spring: Stainless steel wire *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• Machine elements

The "HNSW" is a zinc die-cast hinge that can be used for safety switches and monitoring of doors and covers, such as those on devices and safety fences. When the door is opened, the switch contacts operate. The NC contact cuts off the circuit upon the door's opening, while simultaneously the NO contact notifies that the door has been opened. In addition to this product, we also offer various other products such as the metal hinge "HNSW-N," the safety switch hinge "HNSWS," and the hinge plate "HNER." 【Material and Finish】 ■ Body: Zinc die-cast, powder coating (silver metallic) ■ Pin: Equivalent to SUS303 *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• Machine elements

"HNNHS" is a large stainless steel slide hinge that can be installed on the inside of doors and other surfaces. The maximum opening angle is 180°. The installation direction can be selected based on the product code. In addition to this product, we also offer other large slide hinges such as "HNNMS" and "HNNVS," as well as three hinge plates: "HNBFS," "HNBMS," and "HNBRS." 【Material and Finish】 ■Main body: SUS304 *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• Machine elements

"HNMHA" is a large aluminum slide hinge designed to be installed on the inside of doors and similar structures. The maximum opening angle is 180°. It comes with four reinforced washers. Please use M6 screws for installation. In addition to this product, we also offer two other large aluminum slide hinges, "HNMMA" and "HNMVA," as well as three hinge plates, "HNAFS," "HNAMS," and "HNARS." 【Material and Finish】 ■ Main body: Aluminum alloy, anodized finish ■ Washer: SUS304 *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• Machine elements

The "HNG-A-CR" is an all-metal hinge. It features a robust design and is suitable for heavy-duty applications. The mounting holes are designed for countersunk screws. Additionally, we also offer "HNG-C-CR," "HNHGS-A," "HNHGS-L," and "HNRB." 【Material and Finish】 ■ Body: Zinc die-cast, chrome-plated ■ Pin: Equivalent to SUS303 ■ Hex socket countersunk screws (screw included as a service): SUSXM7 *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• Machine elements

The "ST-11A" is a through-hole type hinge that allows the door to be held at any position, regardless of the angle of the hinge. It is suitable for use in areas with limited installation space. There are types with different holding torque for clockwise and counterclockwise rotation, as well as types with the same torque. Additionally, we also offer "ST-11A1," "ST-8A," and "ST-8A1" products. 【Material and Finish】 ■ Main body: Zinc alloy, electrostatic coating (matte black) ■ Hexagon socket bolt (screw included as a service): SUSXM7 *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• Machine elements

The "HNSH-A" is an all-metal hinge. It features a simple design with a reduced thickness. You can choose from a variety of patterns based on the combination of vertical and horizontal dimensions. In addition to this product, we also offer "HNSH-B," "HNSHS-A," "HNSHS-B," "HNSHS-N," and "HNSPS-B." 【Material and Finish】 ■ Body: Steel, zinc-plated, trivalent chromate treatment ■ Pin: Equivalent to SUS304 ■ Cross-recessed small head screw (screw included service): SUSXM7 *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• Machine elements

The "E6" is a torque hinge that holds the door at any position regardless of the angle of the hinge. We offer types with different holding torque for clockwise and counterclockwise rotation, as well as identical types. By selecting the holding torque according to the application—light when opening and heavy when closing, or vice versa—you can enhance the operability and safety of the door. Additionally, we have other products available, including plastic, one-way types, large sizes, and stainless steel torque hinges. 【Material and Finish】 ■ Body: Aluminum alloy, electrostatic coating (matte black) ■ Hex socket bolt (screw included): SUSXM7 *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• Machine elements

The "CB" is a counterbalance hinge that assists in the opening and closing of panels vertically due to the action of a torsion spring, allowing for easy operation of heavy panels. When the panel is opened beyond 65°, it automatically opens to the fully open position (80°) due to the cam mechanism. If one unit of this product can accommodate the required torque, please use it in combination with a support hinge (sold separately). 【Applicable Screw Size】 ■ Screw Diameter: M6 ■ Screw Length - Minimum: Panel thickness + 9.5 - Maximum: Panel thickness + 12.7 *For more details, please download the PDF or feel free to contact us.

• Other machine elements
• Machine elements