メカニー List of Products and Services

At Mekani Co., Ltd., we are conducting a buyback promotion for shearing machines, compressors, and welding machines from December 1, 2020, to January 31, 2021. We are offering a 10% increase in the buyback price compared to the usual assessment amount. We support pickups nationwide. We also welcome machines that are 10 years old or more. Please feel free to contact us if you have any inquiries. 【Items for Enhanced Buyback (Partial List)】 ■ Shearing Machines - Amada: M Series from 1995 onwards DCT Series from 1995 onwards H Series from 1995 onwards ESH Series from 2000 onwards - Komatsu: SHS Series from 1995 onwards ■ Compressors - Hitachi: Various screw compressors from 2009 onwards - Anest Iwata: Various scroll compressors from 2009 onwards - Meiji: Various package compressors from 2009 onwards ■ Welding Machines - Daihen: Digital TIG welding machines/TIG welding machines from 2005 onwards - Panasonic: Digital semi-automatic welding machines/semi-automatic welding machines from 2005 onwards *For more details, please refer to the PDF document or feel free to contact us.

• Used goods purchase

This document introduces "How to Choose Used Machinery Without Making Mistakes." While used machinery has significant advantages in terms of price and delivery time compared to new machinery, there are many aspects that may cause concern due to its used nature. This guide presents key points for successfully acquiring good used machinery without making mistakes. [Points for Choosing Used Machinery] 1. Specifications 2. Price 3. Condition 4. Service *For more details, please refer to the PDF document or feel free to contact us.

• Used goods purchase

We would like to introduce the "ML13030-7050D" handled by Mekani Co., Ltd. The target work dimensions are 13000×3050mm, and the oscillator has a rated power of 5kw and a peak power of 7kw. Additionally, it has been used in an ISO9001 certified factory and has been well-maintained. The operating hours are also low at 15000H. 【Overview】 ■ Manufacturer: Mitsubishi ■ Machine Name: Laser Processing Machine ■ Model Name: ML13030-7050D ■ Year: 2003 ■ Inventory Number: 21123 *For more details, please refer to the PDF document or feel free to contact us.

• Special Processing Machinery
• Other processing machines
• Other machine elements

Introducing the "ML3015LZP-3020D-S1" handled by Mekani Co., Ltd. This is a super low-operation machine from 2002. (2,392H) It comes with a pallet changer, chiller, dust collector, and cooling tower. The target work dimensions are 3050×1525mm, and the oscillator has a rated power of 2kw and a peak of 3kw. 【Overview】 ■ Manufacturer: Mitsubishi ■ Machine Name: Laser Processing Machine ■ Model Name: ML3015LZP-3020D-S1 ■ Year: 2002 ■ Inventory Number: 21152 *For more details, please refer to the PDF document or feel free to contact us.

• Special Processing Machinery
• Other processing machines
• Other machine elements

We would like to introduce the product we handle, the "ML2512HVP-20CF2+25PC10LHVB." The target work dimensions are 2440×1220mm, and the oscillator has a rated power of 2kw. It comes with accessories including a 10-stage pallet changer, chiller, dust collector, and cooling tower. Additionally, we have a variety of other used machines available. 【Overview】 ■ Manufacturer: Mitsubishi ■ Machine Name: Laser Processing Machine ■ Model Name: ML2512HVP-20CF2+25PC10LHVB ■ Year: 2006 ■ Stock Number: 21067 *For more details, please refer to the PDF document or feel free to contact us.

• Special Processing Machinery
• Other processing machines
• Other machine elements

We would like to introduce the "ML2512HV II-20CF3" handled by Mekani Co., Ltd. This is a low-operation laser processing machine. The chiller's refrigerant is R-407C, which is not a problem, and it is a recommended machine. It is available for trial operation. Additionally, the target work dimensions are 2440×1220mm. 【Overview】 ■ Manufacturer: Mitsubishi ■ Machine Name: Laser Processing Machine ■ Model Name: ML2512HV II-20CF3 ■ Year: 2011 ■ Stock Number: 21166 *For more details, please refer to the PDF document or feel free to contact us.

• Special Processing Machinery
• Other processing machines
• Other machine elements

Introducing the "ML2512HV-20CF2" handled by Mekani Co., Ltd. This is a laser processing machine that has been used carefully with minimal operating hours. The target work dimensions are 2440×1220mm, and the oscillator has a rated specification of 2kw. It comes with accessories including a chiller, dust collector, and cooling tower. 【Overview】 ■ Manufacturer: Mitsubishi ■ Machine Name: Laser Processing Machine ■ Model Name: ML2512HV-20CF2 ■ Year: 2007 ■ Inventory Number: 21146 *For more details, please refer to the PDF document or feel free to contact us.

• Special Processing Machinery
• Other processing machines
• Other machine elements

Introducing the "ML1212HV-3020D" handled by Mekani Co., Ltd. This is an ultra-low operating machine for school use, with an operating time of 1145 hours. It comes with accessories including a chiller, dust collector, cooling tower, and automatic feeder, and the target work dimensions are 1220×1220mm. [Overview] ■ Manufacturer: Mitsubishi ■ Machine Name: Laser Processing Machine ■ Model Name: ML1212HV-3020D ■ Year: 2005 ■ Stock Number: 21150 *For more details, please refer to the PDF document or feel free to contact us.

• Special Processing Machinery
• Other processing machines
• Other machine elements

We would like to introduce the "LC-2415αIII-NT" that we handle. This laser processing machine was used for cutting signs and similar items, so it has been used relatively lightly and is in very good condition. The oscillator is OLC-320H3, 2kw, and it comes with accessories including a chiller, dust collector, and Easy Cut. In addition, we have a variety of other used machines available. 【Overview】 ■ Manufacturer: Amada ■ Machine Name: Laser Processing Machine ■ Model Name: LC-2415αIII-NT ■ Year of Manufacture: 2005 ■ Stock Number: 21149 *For more details, please refer to the PDF document or feel free to contact us.

• Special Processing Machinery
• Other processing machines
• Other machine elements

Introducing the "LC-1212αIIINT" handled by Mekani Co., Ltd. The chiller was manufactured in 2016, and the oscillator was replaced with an overhauled unit by the previous user between 2015 and 2016. Additionally, the XYZ travel range is 1270×1270×300mm, and the oscillator specifications are OLC320H and 2kW. 【Overview】 ■ Manufacturer: Amada ■ Machine Name: Laser Processing Machine ■ Model Name: LC-1212αIIINT ■ Year of Manufacture: 1999 ■ Stock Number: 21129 *For more details, please refer to the PDF document or feel free to contact us.

• Special Processing Machinery
• Other processing machines
• Other machine elements

We would like to introduce the "FO-3015NT + ASF3015-FO (6-tier shelf)" that we handle. The maximum processing dimensions are 3070 × 1550 mm, and the oscillator specifications are AF-4000E, 4 kW. It comes with accessories including a 6-tier shelf (4 processing pallets and 2 material pallets), a chiller, and a purge dryer. In addition, we handle various other used machines. 【Overview】 ■ Manufacturer: Amada ■ Machine Name: Laser Processing Machine ■ Model Name: FO-3015NT + ASF3015-FO (6-tier shelf) ■ Year of Manufacture: 2004 ■ Stock Number: 21022 *For more details, please refer to the PDF document or feel free to contact us.

• Special Processing Machinery
• Other processing machines
• Other machine elements

Introducing the "FO-3015NT" handled by Mekani Co., Ltd. The maximum processing dimensions are 3070×1550mm, and the oscillator specifications are AF-6000E, 6kw. It comes with accessories such as a pallet changer, chiller, dust collector, and purge dryer. In addition, we have a wide variety of used machinery available. 【Overview】 ■ Manufacturer: Amada ■ Machine Name: Laser Processing Machine ■ Model Name: FO-3015NT ■ Year: 2007 ■ Stock Number: 21162 *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Other machine elements
• Special Processing Machinery

Introducing the "FO-2412NT" handled by Mekani Co., Ltd. This is a laser processing machine manufactured in 2007. The maximum processing dimensions are 2520×1270mm, and it features an AF-4000E 4kw oscillator. Additionally, it comes with accessories including a chiller, dust collector, and purge dryer. 【Overview】 ■ Manufacturer: Amada ■ Machine Name: Laser Processing Machine ■ Model Name: FO-2412NT ■ Year of Manufacture: 2007 ■ Stock Number: 21160 *For more details, please refer to the PDF document or feel free to contact us.

• Laser marker
• Other processing machines
• Other machine elements

Introducing the "LC1212C1NT" handled by Mekani Co., Ltd. This is a high-year model punch laser hybrid machine. The beam is a 21150H and is still very usable. The maximum processing dimensions are 1270×1270mm (laser) and 1770×1270mm (punch), and it comes with accessories including a chiller, dust collector, and purge dryer. 【Overview】 ■ Manufacturer: Amada ■ Machine Name: Punch Laser Hybrid Machine ■ Model Name: LC1212C1NT ■ Year: 2011 ■ Stock Number: 21163 *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Other machine elements

We would like to introduce the "EML-Z3510NT+ASR48M" handled by Mekani Co., Ltd. The composite processing range is 2500×1270mm, and the oscillator is AF4000E with a specification of 4kw. It comes with an 8-stage cycle loader (ASR48M), chiller, dust collector, and purge dryer as accessories. Additionally, we have a wide variety of used machines available. 【Overview】 ■ Manufacturer: Amada ■ Machine Name: Punch Laser Composite Machine ■ Model Name: EML-Z3510NT+ASR48M ■ Year of Manufacture: 2004 ■ Stock Number: 21156 *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Other machine elements

Introducing the "EML-3510NT" handled by Mekani Co., Ltd. This is a punch-laser hybrid machine manufactured in 2007. The processing range is 2500×1270mm, the oscillator is AF4000E with 4kW, and it comes with accessories including a chiller, dust collector, and purge dryer. Additionally, we also engage in the sale and purchase of various other used machinery. 【Overview】 ■ Manufacturer: Amada ■ Machine Name: Punch-Laser Hybrid Machine ■ Model Name: EML-3510NT ■ Year of Manufacture: 2007 ■ Stock Number: 21165 *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Other machine elements

Introducing the "EML-3510NT" handled by Mekani Co., Ltd. This is a punch-laser hybrid machine manufactured in 2008. The processing range is 2500×1270mm, with a turret station of 58ST and a specification of 2AI. Additionally, it comes with accessories including a chiller, dust collector, and purge dryer. 【Overview】 ■ Manufacturer: Amada ■ Machine Name: Punch-Laser Hybrid Machine ■ Model Name: EML-3510NT ■ Year: 2008 ■ Inventory Number: 22067 *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Other machine elements

Introducing the "ML1515VZ10-20CF3" handled by Mekani Co., Ltd. The XYZ stroke is 1520×1520×850mm, the oscillator has a rated power of 2kw, and it comes with accessories including a chiller and cooling tower. In addition, we also buy and sell a wide variety of used machinery. 【Overview】 ■ Manufacturer: Mitsubishi ■ Machine Name: 3D Laser Processing Machine ■ Model Name: ML1515VZ10-20CF3 ■ Year of Manufacture: 2014 ■ Stock Number: 21138 *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Laser marker
• Other machine elements

We would like to introduce the "FBD7-70-300T," handled by Mekani Co., Ltd. This is a used machine manufactured in 2019. It has a maximum load of 600 kg, a lift height of 2990 mm, and a fork length of 850 mm, and it is battery-operated. Additionally, we also engage in the sale and purchase of various other used machines. 【Overview】 ■ Manufacturer: Nichiyu ■ Machine Name: Coter Lift ■ Model Name: FBD7-70-300T ■ Year of Manufacture: 2019 ■ Stock Number: 44191 *For more details, please refer to the PDF document or feel free to contact us.

• lift
• Other conveying machines
• Other machine elements

We would like to introduce the "QUICK TURN NEXUS 250 (QTN-250)" handled by Mekani Co., Ltd. This is a used machine that has been painted and inspected for accuracy. The maximum machining diameter is Φ350mm, the maximum machining length is 483mm, and the XZ travel is 190×515mm. It features a 12-sided turret on the tool post and comes with a chip conveyor. 【Overview】 ■ Manufacturer: Yamazaki Mazak ■ Machine Name: NC Lathe ■ Model Name: QUICK TURN NEXUS 250 (QTN-250) ■ Year: 2003 ■ Stock Number: 32073 *For more details, please refer to the PDF document or feel free to contact us.

• lathe
• Other machine elements

Introducing the "Crysta-Plus M443" handled by Mekani Co., Ltd. It operates normally. It has been secured by the manufacturer and is being transported with lifting. The main base uses a highly reliable granite plate (precision stone flat), and by integrating the Y-axis guide rail with the measurement table, it has a structure with high rigidity and minimal aging changes. 【Overview】 ■ Manufacturer: Mitutoyo ■ Machine Name: Three-Dimensional Measuring Machine ■ Model Name: Crysta-Plus M443 ■ Year: 2009 ■ Stock Number: 41128 *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• 3D measuring device

★Deburring Machine Purchase Campaign★ What are you doing with idle machinery in your factory or trade-in machines during replacement? Where should you inquire? How should you explain it? Will they handle the removal work? There are likely many questions and concerns. We can solve them! Leave it to Mekani Co., Ltd., with over twenty years of experience in buying and selling used machinery. We offer desk assessments based on photos and on-site assessments by our staff, tailored to your convenience. Please contact us first. In addition to deburring machines, we handle a wide variety of metal processing machinery, including laser processing machines, press brakes, shearing machines, turret punch presses, forging machines, band saws, ironworkers, lathes, machining centers, milling machines, grinding machines, compressors, welding machines, and more from various manufacturers. We look forward to hearing from you!

• Other machine tools

For customers considering the introduction of a laser processing machine for the first time, as well as those contemplating a replacement, our knowledgeable and experienced sales staff and service engineers will provide you with peace of mind. The machines are maintained at our machine center, allowing you to check the actual equipment and conduct test processing. When introducing a machine, we can handle delivery, installation, trial operation, and operation instructions (within Japan only). In addition to laser processing machines, we have a diverse range of equipment in stock from various manufacturers, including press brakes, shearing machines, turret punch presses, forging machines, band saws, ironworkers, lathes, machining centers, milling machines, grinding machines, compressors, and welding machines. If you are considering equipment introduction or replacement, please feel free to contact us!

• Other machine tools

We would like to introduce a maintenance case of a press brake that we handled. Even after tightening the lower limit lock handle, the table drops after moving it up and down several times. Additionally, there were suspicions of oil leakage and misalignment of the back gauge. It is believed that uneven wear occurred due to the wear of the friction plate of the lower limit block and the bending of the stop fixture. Regarding the lower limit block assembly and oil leakage, the cylinder is fine, but please monitor the situation after tightening the pressure gauge fittings on the backside of each piping. Also, for the back gauge, please consider replacing the stop assembly and the stretch. [Case Study] ■ Product - Press Brake "RG-80s" ■ Situation - The table drops after moving it up and down several times, even after tightening the lower limit lock handle. - There are suspicions of oil leakage and misalignment of the back gauge. ■ Cause - Uneven wear occurred due to the wear of the friction plate of the lower limit block and the bending of the stop fixture. *For more details, please refer to the PDF document or feel free to contact us.

• brake

We would like to introduce a maintenance case of a press brake that we handled. A problem occurred where the pressure did not rise above 60 tons. This was believed to be due to the wear of the disc spring in the distributor section. Therefore, we inserted a spacer, adjusted the pressure, and confirmed the operation. 【Case Study】 ■Product ・Press Brake "RG-100" ■Situation ・Pressure does not rise above 60 tons ■Cause ・Wear of the disc spring in the distributor section ■Countermeasure ・Inserted a spacer, adjusted the pressure, and confirmed the operation *For more details, please refer to the PDF document or feel free to contact us.

• brake

We would like to introduce a maintenance case of a press brake that we handled. Two issues occurred: the lower limit lever was not functioning, and the lower limit lock of the table was not working. The lower limit lever had a broken snap ring for preventing the misalignment of the spring mounting pin at the friction plate attachment. Due to wear on the snap ring installation and groove, light welding was performed. The connecting pin was replaced due to damage. After that, operation was confirmed. Additionally, the lower limit lock was not functioning properly because the connecting pin between the handle and shaft was too long, causing interference during rotation and preventing the block from closing completely. The excess length of the connecting pin (cotter pin) was trimmed to eliminate the interference. The lower limit lock was restored to normal operation. [Case Study] ■ Product - Press Brake "RG-80s" ■ Situation - Case 1: The lower limit lever of the table is not functioning - Case 2: The lower limit lock of the table is not functioning (case with RG80s) *For more details, please refer to the PDF document or feel free to contact us.

• brake

We would like to introduce a maintenance case for the turret punch that our company handled. Due to the position of the work clamp, a dimensional error of about 1mm occurred in the punching. It seems to be a defect in the clamp rail. After swapping the clamps left and right, we adjusted the shim at the clamp chip part, reducing the error to ±0.3mm, but without replacing the rail, the error will vary. Additionally, there is play in the Y-axis ball screw, with an error of ±0.2. There is also play in the X-axis LM guide and ball screw, but the current error is believed to be largely due to wear on the clamp rail. [Case Study] ■ Product - Turret Punch "VIPROS357" ■ Situation - A dimensional error of about 1mm occurred due to the position of the work clamp. ■ Cause - Defect in the clamp rail - Play in the Y-axis ball screw *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

[From a customer primarily engaged in the production and construction of architectural hardware in Sanmu City, Chiba Prefecture] The cutting performance when shearing 12mm plates has deteriorated, and there was a suggestion that "if only we had a laser." Due to the increasing variety of requests from customers, it became necessary to enhance our production equipment, so we introduced our laser processing machine. After the introduction, we were able to produce quickly. Previously, there was always a process of cutting with shearing followed by drilling, but now we can cut and drill with the laser, eliminating burrs and improving precision. We will need to get accustomed to the operation going forward, but it allows us to do various tasks, making work more enjoyable. The young staff are also operating it with smiles. It feels like a machine that has "dreams." *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic processing machines (cutting and rolling)
• Special Processing Machinery
• Other processing machines

[From a customer engaged in can manufacturing, sheet metal work, equipment, and welding processing in Hamamatsu City] We wanted to expand possibilities and opportunities, and we also wanted our staff to grow, which led us to decide to introduce a laser processing machine. Additionally, our company has relatively many young personnel in the industry, and bringing in new machinery serves as a stimulus for the younger staff. After the introduction, I believe that the working time has been reduced by about 50%. As a result, labor costs have also decreased. Previously, the process was "cutting" → "drilling" → "welding," but now it has changed to "using laser" → "welding." Tasks that were done by two people can now be done by one, resulting in significant benefits such as "reduced time," "clean cuts," and "increased precision." *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)
• Special Processing Machinery
• Other processing machines

[From a customer engaged in the production and repair of ship equipment and seafood processing facilities] Our factory, which we had been using, was washed away in the earthquake, and we were conducting operations in a temporary location. With the support of securing construction materials and assistance from the government, we were finally able to build a new office building. As a result, we were able to install a shear of a size that we could not use before, and we decided to introduce the shear. After the introduction, we were able to cut steel plates of sizes that were difficult to cut before. In particular, we want to respond to customer demands by cutting thick steel plates, and I believe that the speed and efficiency of our work will improve. It seems that it will be useful for ancillary work related to the delivery of ship engines. It would be great if the range of "things we can do" expands. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic processing machines (cutting and rolling)
• Special Processing Machinery
• Other processing machines

[From a customer primarily engaged in press parts manufacturing] We had a machine that we were using, but it was too large, making it difficult to share. Therefore, we decided to have that machine taken away and wanted to introduce a machine of a more appropriate size, which led us to implement a press machine. After the introduction, the usability has improved. Since we switched to a smaller machine, we have more space, and with the increase in the number of machines, it has become easier to organize our work. Additionally, repairs and maintenance will be necessary afterward, but the good mobility of the service has been helpful. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic processing machines (cutting and rolling)
• Special Processing Machinery
• Other processing machines

From a customer primarily engaged in manufacturing with press machines: "It seems we will be making ●● products" → "Should we consider introducing new equipment?" → "If that equipment is available, could you make ●● products for us?" This led to the introduction of press machines and leveler feeders. Until now, we only had one robotic line, but due to high demand, we were hoping for an additional line. By introducing a new robotic line, we have also expanded our processing capabilities, and it seems to have served as a promotion as well. I believe that equipment is essential for our work. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic processing machines (cutting and rolling)
• Special Processing Machinery
• Other processing machines

[From a customer engaged in custom orders related to construction and sheet metal, as well as vehicle bodywork] We wanted to internalize the work that we had previously outsourced and have been considering increasing our sheet metal-related tasks, which led us to think about introducing a press brake and corner shear. Additionally, I have strongly wanted to create products using a press brake and shearing machine while making various adjustments and innovations on my own. After the introduction, we were able to respond quickly to changes from customers, which I believe is a positive outcome. Furthermore, rather than just selling and leaving, I appreciate that they are approachable for after-sales support and assistance. It is also very helpful that we can learn about industry information, machine operation methods, technical aspects, and case studies. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic processing machines (cutting and rolling)
• Special Processing Machinery
• Other processing machines

[From a customer whose business focuses on general sheet metal production, including architectural hardware] We aimed to speed up and improve efficiency by automating tasks previously performed by people, and introduced equipment such as radial drills. Initially, we struggled with the new machines since they were our first experience with them. However, as we became accustomed to them, they proved to be very user-friendly, making it easier to organize our work processes. Now, we are operating with two machines. Additionally, the after-sales support, including maintenance, is reliable, providing us with peace of mind. There are times when we need quick responses when we are unsure about how to use the machines, and having knowledge about their operation and maintenance is very helpful. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic processing machines (cutting and rolling)
• Special Processing Machinery
• Other processing machines

[From customers primarily involved in sheet metal hardware and equipment used in the livestock industry] Recently, due to the heavy rainfall in northern Kyushu on July 12, 2012, the factory itself was submerged up to chest height, rendering the machinery unusable. As a result, we introduced shearing and set presses. Additionally, due to a high volume of orders, we also brought in new machinery. Since the introduction, we have been able to increase our speed. We are also using two different-sized shearing machines to improve efficiency. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic processing machines (cutting and rolling)
• Special Processing Machinery
• Other processing machines

【From customers primarily engaged in the production of semiconductor equipment and molds, both domestically and internationally】 Originally, the challenge was "how to reduce costs," which prompted the introduction of new solutions. Initially, we were considering different types of machines, asking questions like, "What about wire?" and "What about presses?" As we thought about subsequent processes and plating treatments, we decided to introduce a laser processing machine. After the introduction, we were able to stand at a starting point of "let's begin here." It was gratifying to be able to respond to requests from customers who were facing difficulties. The condition of the machine was good, allowing us to achieve the expected precision, which has been very helpful. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic processing machines (cutting and rolling)
• Special Processing Machinery
• Other processing machines

[From a customer engaged in a wide range of operations, from can manufacturing to plant construction] We needed to update our equipment and were looking for a laser processing machine that could perform clean cuts (oxygen-free cutting) up to about 6mm. Previously, we were using a 1.5kw machine, but we upgraded to a 3kw output. Additionally, we had wanted an iron worker for drilling for some time, so we introduced both the laser processing machine and the iron worker. After the introduction, we were able to reduce costs and increase flexibility. We can now handle tasks that we previously outsourced in-house, which has lowered costs in terms of both price and time. We also appreciate the ability to quickly respond to changes in specifications for items like stairs that are installed on-site. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic processing machines (cutting and rolling)
• Laser marker
• Special Processing Machinery

[From a customer primarily engaged in steel plate relations, processing, welding, and finishing] We needed to generate nitrogen gas for the laser processing machine we use, so we introduced a nitrogen generator. Previously, we were purchasing gas in cylinders, but it was costly, so we were looking for a generation device. After the introduction, our costs decreased, and we were able to increase the machine's operating rate. When we were using cylinders, there was a natural depletion, which caused losses, but that has been eliminated. Also, it's great that we can operate the machine without worrying about the remaining amount. *For more details, please refer to the PDF document or feel free to contact us.*

• Nitrogen Gas Generator

[From customers dealing with metal processing, mainly handling factory roofing materials and metal fittings] We wanted to cut larger-sized sheets, so we introduced shearing and other equipment. After the introduction, we were previously only able to cut sheets up to about 3 meters, but now we can cut up to 4 meters. Additionally, the cutting speed has increased. I believe it has become approximately 20% faster. Also, since we can now cut larger-sized sheets, it has become more efficient. *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)
• Circuit board processing machine

[From a customer engaged in various laser processing, precision sheet metal, and welding] Previously, when handling a large number of parts and products for delivery, I injured my arm due to manual work. Mistakes during the checking process are certainly not acceptable. The thought of "if we can increase accuracy and precision" prompted us to introduce new machines, including turret punch presses, shearing machines, and NC tapping. After the introduction, the scope of our operations expanded. We became capable of handling not only single items but also a large number of orders, and our speed improved. Additionally, we were able to perform tasks that were previously impossible in-house, leading to cost reductions. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic processing machines (cutting and rolling)
• Circuit board processing machine
• NC unit

【From a customer involved in machining related to nozzles, can manufacturing, and piping】 We have been requested to undertake tasks that cannot be performed with the machines we have been using until now. We need to engage in various trial and error processes to develop new methods and ideas on our own. In the course of this, we introduced a CNC lathe that became necessary. After the introduction, our range of operations expanded, and we gained more clients. We also have some machines that are not commonly found elsewhere, allowing us to innovate and reduce man-hours. *For more details, please refer to the PDF document or feel free to contact us.*

• NC unit
• lathe

Mechanic Co., Ltd. is engaged in the sale and purchase of used machinery, based in the Kansai and Kyushu regions. This document contains information about our inventory of machines (as of January 23, 2020). We offer a wide range of products, including laser processing machines, turret punch presses, press brakes, and shearing machines. We handle various manufacturers such as Amada, Mitsubishi, Komatsu, Mazak, and Hitachi. Specifications and inventory locations for each machine are also included, so please make use of this information. [Contents] ■ Manufacturer ■ Machine Name ■ Model Name ■ Specifications ■ Year of Manufacture ■ Inventory Location *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools
• Other processing machines
• lathe

Mechanic Co., Ltd. is engaged in the sale and purchase of used machinery, based in the Kansai and Kyushu regions. This document includes information on our inventory of machines (as of January 23, 2020). We offer a wide range of products, including laser processing machines, turret punch presses, press brakes, and shearing machines. We handle various manufacturers such as Amada, Mitsubishi, Komatsu, Mazak, and Hitachi. Specifications and inventory locations for each machine are also included, so please make use of this information. [Contents] ■ Manufacturer ■ Machine Name ■ Model Name ■ Specifications ■ Year of Manufacture ■ Inventory Location *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools
• Other processing machines
• lathe

Mechanic Co., Ltd. was established in 1998, focusing on the sale and purchase of used machinery. For over 20 years, we have been conducting business with numerous customers. We have a wide range of products, including sheet metal machines and machine tools, which are maintained and displayed at our own machine center. If you visit us, you can see a broad category of products. Additionally, you can always check the inventory status on our website. Currently, we are not only focusing on used machinery but also on new machinery, with plans to further enhance our offerings in the future. With our experience in meeting various needs, we are sure you will find what you are looking for. 【Business Activities】 ■ Sales of various new machines ■ Sales and purchase of used machinery *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools
• Other processing machines
• lathe

From purchase assessment to dismantling and pickup work, our staff will visit and assist you. First, please provide us with your company name, the name of the contact person, location, phone number, type of machinery (such as turret punch or laser processing machine), and whether it is operational or not. We can respond via phone, fax, or email. 【Information we would like to know】 ■ Type of machinery (such as turret punch or laser processing machine) ■ Whether it is operational or not ■ Purchase price at the time ■ Availability of specifications and manuals ■ Whether you can send images of the machinery ■ Whether we can visit for an inspection, etc. *For more details, please refer to the external link page or feel free to contact us.

• Other machine elements
• Other contract services
• Other services