南豆無線電機 List of Products and Services

The standard set includes the "main unit," "microphone included with the main unit," "sub-unit speaker microphone," and "AC adapter." It is a simple intercom that requires no wiring work; you can use it just by plugging the cables into the jacks of the main unit. It operates on AC 100V. The sub-unit has a mute function, which turns off the sub-unit microphone approximately 2 minutes after no one is present, and the microphone turns on again when someone approaches, thanks to a sensor feature.

• Capacitor

This is a user-friendly number display system for patients in waiting rooms. It contributes to the efficiency of not only hospitals but also banks and restaurants, with its easy-to-use operation. Being wireless, it also eliminates the need for wiring work.

• Capacitor

30cm in total length, easy to handle This traffic guiding light has a total length of 30cm, with a grip section of 10cm and a light section of 20cm, making it shorter and easier to handle, even for women. Red, blue, and white with various lighting modes The traffic guiding light featured on this page is a multifunctional type with red, blue, and white options. The lighting mode can be switched by pressing the toggle button. - Red flashing - Blue flashing - Alternating red and blue flashing (long) - Alternating red and blue flashing (short) - White light and LED light at the tip (flashlight function) - Off Can be fixed to vehicles with a magnet A magnet is embedded in the base of the grip (battery cover), allowing it to be fixed to metal plates, heavy machinery, vehicle bodies, H-beams, etc. Flashlight (LED light) function When switched to white in the lighting mode, the LED embedded at the tip lights up, allowing it to be used as a simple flashlight (LED light). Belt clip included A belt clip (hook) is included with the grip section of the guiding light. When not in use, the traffic guiding light can be hung on a belt using the clip.

• Sound Parts

Stand-mounted Siren This is a stand-mounted hand-cranked siren (dark green). It can be secured with four φ5mm bolts or tapping screws. No batteries or power source required Since it operates by manually turning the handle, there is no need for batteries or any power source. It is suitable for use in mountainous areas where electricity is not available. Also for disaster preparedness and emergency equipment How about installing it as a disaster preparedness item in various municipalities, educational institutions, or condominium management associations? It will reliably alert you in case of an emergency.

• Sound Parts

Fixed-type fire color siren LK-119RST suitable for disaster prevention and emergency use. Since the Great East Japan Earthquake, the demand for disaster prevention and emergency supplies has increased. Screws and tapping sold separately. It is fixed with 4 screws/nuts of 5mm, but they are not included, so please prepare them separately.

• Sound Parts

Sister product of LK-100 This is a sister product of the LK-100 in a dark green color. The dimensions, weight, operation method, and sound volume are all the same; the only difference is the paint color. Manual operation, no batteries required As it is a manually operated hand-cranked siren, there is no need for batteries or an electrical outlet. It is a fire siren in fire color (red) suitable for self-defense and schools. Suitable for outdoor alerts It is suitable for hazardous outdoor work (such as during blasting operations with explosives). It can be easily operated by anyone. The fire color is appropriate for alerting. Lightweight and portable compact size The product weighs approximately 1.2 kg and is compact enough to be easily held with one hand, making it easy to move. No power supply voltage is required. Foldable handle and grip The handle and grip are folded during shipping (when stored). They can be extended for use. Volume adjustment with opening and closing lever By pulling the opening and closing lever, you can adjust the volume and emit signals with intermittent sounds.

• Sound Parts

Small audio guide receiver The receiver size is only 4cm × 6.5cm, with a thickness of 1.2cm (excluding protrusions). Weighing approximately 28g, it does not burden the customer. Audio guide system with ear-hook earphones This audio guide is suitable for use in places where consideration for loud sounds is necessary (such as museums) as it allows users to listen to audio guidance through ear-hook earphones. Conversely, if you want to provide explanations with loud audio, please refer to the hands-free megaphone Power Giga. Clear audio guide without stress This is a voice guide receiver using a 2.4GHz digital system with excellent sound quality. With comprehensive noise countermeasures, it provides clear sound quality that is easy for customers to hear. Dedicated device with minimal interference concerns It is used by grouping a dedicated transmitter (master unit) and multiple audio guide receivers (slave units). Since it uses a dedicated transmitter, there is less concern about interference or eavesdropping, making it a secure audio guide. Supports up to 10 groups in the same space The dedicated transmitter (master unit) has 10 channels, allowing it to support up to 10 groups in the same space. For example, it can operate multiple groups simultaneously for interpretation in 'Japanese / English / Chinese / Korean,' etc.

• Sound Parts

Multi-functional intercom for various purposes By setting the internal rotary switch, it can be used as a master unit for simultaneous communication intercoms or as a sub-unit. It can also function as a reception-only sub-unit without any limit on the number of units. Furthermore, it can be utilized as a master unit for a guide system. So many functions - Can be used as a master unit for simultaneous communication - Can be used as a sub-unit for simultaneous communication - Can be used as a reception-only sub-unit - Can be used as a master unit for a voice guidance system Radio, headset, and case The digital 2.4GHz band radio NZD-240, along with a dedicated headset and a dedicated belt case, is available as a set, making it more affordable than ordering items separately. Simultaneous communication for up to four people, like a phone call It can be used as a wireless intercom that allows for conversation in a manner similar to a phone call or a multi-person conference call. With four units, it can support simultaneous communication for up to four people. Unlimited number of reception-only units By setting the rotary switch, it can also function as a reception-only unit (switch number 7). There is no limit on the number of units if they are used solely for listening as reception-only units.

• Sound Parts

Pick up ringtones and amplify powerfully The ringtones from mobile phones, smartphones, and PHS are picked up by a pickup microphone and amplified loudly through a trumpet-shaped speaker. Loud volume that overcomes noise The ringtone resonates from the highly directional trumpet speaker, making it suitable for noisy environments such as factories, construction sites, and agricultural work far from buildings. Of course, the volume can also be adjusted (turned down). Close-contact sound collection with a pickup microphone The clip-type microphone allows the sound collection part to be clamped onto mobile phones, ensuring close contact with the microphone part. *Note: Regular telephones cannot be used as there is no part to clamp with the clip. (Even if clamped, the sound collection efficiency is poor with regular telephones, and loud volume cannot be expected.) Also usable as a regular microphone amplifier In addition to the pickup microphone, a coiled cord hand microphone is included, allowing it to be used as a standard microphone amplifier broadcasting device.

• Sound Parts

Notification for the hearing impaired via flashing call sound This product detects the phone's ringing sound using a sound sensor, and an LED flash light blinks. It is suitable for those with hearing difficulties who find it hard to hear ringing sounds. Even in noisy factories In noisy factories where phone ringing sounds are hard to hear, this device helps ensure that important calls are not missed, contributing to improved work efficiency. It is effective not only for landlines but also for mobile phones and smartphones. Adjustable sensitivity sound sensor The dial knob on the sound detection sensor allows for stepless adjustment. The sensitivity of detection varies depending on the individual phone's ringer volume, ringing sound patterns, and the placement of the sensor. With this product, sensitivity can be easily adjusted, minimizing false triggers and building a reliable system. Easy connection with AC adapter The power supply is simply connected by plugging the AC adapter into an outlet. The sound sensor is attached to the phone using double-sided tape, and the flash light is installed in a visible location. Supports additional lights and cable extensions With options available, you can add more flash lights to illuminate two locations or extend the cable length to 5m, 10m, 15m, or 20m.

• Sound Parts

Safety confirmation through mutual communication Not only can work instructions and business communications be conveyed from the main unit, but communication from the sub-unit (worker side) is also possible, improving work efficiency and ensuring safety. Sub-unit microphone and speaker do not require power The sub-unit microphone is a combined type with a speaker. It uses a trumpet-shaped speaker, allowing for easy connection with just one cable. Additionally, the sub-unit does not require a power source. Also suitable as a substitute for high-power phones It is suitable as a replacement for the conventional high-power phone AP-1M, which has been well-received for communication among workers on factory sites. Special notes When the distance between the microphone/speaker and the main unit is close (generally less than 15 meters), feedback is likely to occur, and the volume adjustment knob cannot be turned up.

• Sound Parts

Affordable Drive-Thru Solution for Restaurants A set that includes the main unit (body), tabletop microphone, monitor speaker, sub-unit (microphone and speaker), and weather-resistant cable. With just this, you can easily set up a drive-thru system. The sub-unit installed on the customer side is a horn-type (trumpet-shaped) waterproof microphone and speaker. It is safe for outdoor use even in rainy weather. The main unit microphone installed inside the store is a tabletop stand microphone. It only turns ON when the lever switch is pressed down, providing excellent operability. It can also be locked by tilting it to the opposite side. Power is supplied simply by plugging it into an AC100V outlet. A 20m connection cable between the main unit and sub-unit is included. The connection cable is weather-resistant and features a simple plug-in connector. Anyone can easily install it. Cable extensions tailored to your needs are also available. The NANZU drive-thru system has characteristics that make it less susceptible to feedback compared to traditional models. Additionally, for close-range use of the sub-unit, monitor speakers with feedback prevention are also available in the lineup.

• Sound Parts

The power supply voltage supports both DC12V and DC24V, making it suitable for construction sites, vehicles, ships, and boats where outlet power is not available. With a bidirectional intercom format and high power output that withstands surrounding noise, using a waterproof trumpet speaker for the subunit microphone and speaker ensures safe outdoor use of the subunit even in rainy weather. A microphone connector (4P) of the same shape as the conventional model is adopted, and since the internal wiring of the connector is the same, conventional microphones can be used as is. The NZ-2007D is the main unit (with main unit microphone). For a set that includes the main unit speaker, subunit microphone and speaker, and cables, please see here.

• Sound Parts

Power-free Compact Microphone Mixer The NZB-MX3 is a power-free stereo microphone mixer. It is a convenient card-sized compact mixer that can be used in various ways depending on your ideas. For mixing recordings with video cameras You can use multiple microphones for simultaneous mixing and recording to a video camera, live recording, recording to devices like IC recorders, and connecting to amplifiers. 1. Simultaneous recording of three audio sources during video camera shooting. 2. For editing dubbing with video cameras. 3. As a recording mixer for audio recorders. 4. For karaoke duets and choruses. 5. It is particularly effective for live recordings. Compatible with dynamic microphones It supports dynamic microphones and electret condenser microphones with built-in power. Please note that it cannot be connected to video cameras without an external microphone input terminal.

• Sound Parts

Compatible with wireless guide systems and Tobiko Voice-run This is a wireless receiver that operates in the 800MHz band, suitable for use with the B-band wireless guide system. It is also compatible with Tobiko Voice-run♪ (expanded wireless system) and Kiko Voice-run♪ (hearing system). Strong against interference with a 30-channel switching method Utilizing the 800MHz frequency, which is less susceptible to radio noise from other electronic devices. It features noise reduction, allowing for a wide dynamic range. Reliable and trustworthy Made in Japan This high-quality wireless receiver is domestically produced in Japan, ensuring reliable quality. Standard ear-hook type earphones included Standard ear-hook type earphones that cover the ears are included. You can also use commercially available in-ear type earphones.

• Sound Parts

Includes a 3-way microphone, allowing for 6 patterns of use through combinations. The standard configuration includes three types of microphones: head microphone, pin microphone, and handheld microphone. The transmitter is equipped with two microphone jacks, enabling the simultaneous use of two out of the three types of microphones, allowing for six different usage patterns. Clear sound with 30 channels. Utilizing the B-type wireless microphone frequency, it features noise reduction and achieves a wide dynamic range. It operates in a frequency band that is less susceptible to interference from other electronic devices' radio noise. The tone signal is 32.768 kHz, making it compatible with many B-type wireless microphones. Compatible with B-type 800MHz guide systems and "Tobikoe Run" systems. It can be combined with the B-Guide NZB-R800 to establish a one-way guide system, suitable for factory tours and simultaneous interpretation. It is also compatible with the "Tobikoe Run" system and the "Kikoeru Run" system. Certification for specific low-power devices. This wireless microphone has received compliance certification for 800MHz band specific low-power radio station equipment, ensuring safe use within Japan.

• Sound Parts

It uses a frequency in the 800MHz band that is less susceptible to radio noise from other electronic devices. With noise reduction technology, it achieves a wide dynamic range. It is a high-quality wireless microphone made in Japan, ensuring reliable quality. Adjusting the microphone input level is easy with the included setup driver. You can match the microphone sensitivity with the receiving side. This wireless microphone can be used with the portable receiver of the B-band wireless guide system (Be-Guide). It is also compatible with the Tobikoe and Kikoe systems. By adopting a newly developed dynamic microphone unit, it has improved sound quality and durability. Additionally, the lightweight microphone body provides mobility in various locations. It is a wireless microphone that has received compliance certification for 800MHz band specific low-power radio station equipment, allowing for safe use in Japan. It also complies with the new spurious regulations.

• Sound Parts

Cordless Headset Microphone Set of 6 This is a set that includes 6 headset microphones, 6 cordless modules, 2 simple microphone mixers, and 1 aluminum trunk case. 2.4GHz Bluetooth System The cordless module transmitter and receiver are paired in a 1-to-1 configuration using a 2.4GHz Bluetooth system. There is minimal audio delay, so it does not affect microphone broadcasting. High-Performance Directional Earhook Microphone The headset microphone features a high-performance directional microphone that is also used in the NANZU Power Giga series. Cordless Module Operates on AA Batteries The cordless module transmitter and receiver operate on two readily available AA batteries, making it easy to replace batteries when they run out. A total of 24 AA batteries for operational checks are included as a complimentary item. Simple Mixer for 3 Receivers The set includes 2 simple microphone mixers that can accommodate 3 receivers each. Notes Broadcasting equipment (amplification devices) and speakers are not included.

• Sound Parts

Set of 6 Clip-on Microphones This is a set of 6 cordless clip-on microphones that can be fixed to your chest with a clip. It achieves wireless functionality by combining a reinforced cable type condenser microphone that is resistant to disconnection with a Bluetooth transmission and reception module. Includes 2 Simple Microphone Mixers Also included are 2 simple microphone mixers equipped with three microphone jacks. The simple microphone mixers only allow for volume balance adjustment, making them easy to handle. Additionally, they operate without the need for a power supply. Aluminum Carrying Case The set comes with an aluminum carrying case in A3 size, providing ample storage capacity. You can carry everything in this set. The case has a handle and also comes with a shoulder strap for easy transport.

• Sound Parts

The standard microphone of the hand-free megaphone Power Giga series has adopted a highly rated head microphone, achieving miniaturization and making it usable with a dynamic amplifier. This is a set sale of the Bluetooth wireless module NZ-210C and the condenser head microphone MIC-806. The transmitter and receiver operate on two AA batteries. Since these batteries are easily obtainable, you can feel secure in case of a battery failure. This module realizes the wireless capability of dynamic and condenser microphones through Bluetooth technology. It is convenient to carry, easy to operate, and designed to be resistant to interference. To add a B-type (or C-type) wireless microphone to the B-type wireless amplifier or C-type wireless amplifier, it is necessary to add a receiving tuner unit. By substituting with a wireless microphone module, you can easily and inexpensively expand the number of wireless microphones.

• Sound Parts

This is a cordless tie clip microphone that can be fixed to the collar with a clip. It achieves the miniaturization of the tie clip microphone that many have requested. It is a set sale of the Bluetooth cordless module NZ-210C and the condenser tie clip microphone SD-2006TP. The transmitter and receiver operate on two AA batteries. Since these batteries are easily obtainable, you can feel secure in case of a battery failure. Connecting to broadcasting equipment is simple; just insert the receiver into the microphone terminal of the broadcasting amplifier. It can be directly connected to broadcasting amplifiers that use dynamic microphones and have a thick (6.3mm) microphone terminal. It is compatible with a wide range of devices, including fixed amplifiers in schools and businesses, as well as in-vehicle amplifiers and portable amplifiers. This module utilizes Bluetooth technology to achieve wireless functionality for dynamic and condenser microphones. It is convenient to carry, easy to operate, and designed to be resistant to interference.

• Sound Parts

Includes a convenient trunk case for transportation This is a cordless microphone set that comes with a storage trunk case, making it easy to transport by car, bus, train, or airplane. Two microphone mixers with three channels each It includes two microphone mixers that can connect three microphones. The microphone mixers are designed to connect to a cordless receiver. For speeches as well as karaoke The six stick-type handheld microphones are not only suitable for speeches but also feature built-in echo for karaoke use. Six wired microphone cables included Six microphone cables are also included, allowing you to use the stick-type handheld microphones in a wired configuration if needed. For example, you can use four as wired microphones and two as cordless microphones without any issues.

• Sound Parts

NZ-210D & Echo Microphone This is a set sale of the cordless module NZ-210D and the echo microphone NZ-M502A. With the combination of the echo microphone and transmitter, it quickly transforms into a cordless microphone. Easily expand with one cordless microphone You can easily expand with a cordless microphone by simply inserting the receiver into the microphone jack of your existing broadcasting system. Suitable for speeches and karaoke Set sale of the Canon-style cordless module NZ-210D and echo microphone. It is suitable for both speeches and karaoke. Adoption of Bluetooth technology With Bluetooth technology, it enables the wireless operation of dynamic microphones. It is portable, easy to operate, and designed to minimize interference. Up to three units can be used simultaneously in the same area.

• Sound Parts

Omnidirectional Handheld Microphone The microphone has omnidirectional characteristics, making it relatively easy to pick up surrounding sounds. It is recommended to use it as close to the mouth as possible. Dynamic Type 500 Ohm The impedance is 500 ohms, allowing it to be used with car-mounted amplifiers and various broadcasting amplifiers. Non-intrusive Curl Cord The microphone cord is designed as a non-intrusive curl cord. Wall Mount Compatible with Included Microphone Hook A metal microphone hook and mounting tapping screws are included. You can hang and secure the handheld microphone on the microphone hook.

• Sound Parts

20W Speaker with 10m Cable This is a custom speaker that has replaced the short genuine cable of just under 1m with a 10m long cable. The cable itself has been replaced, not just added. Custom 8 Ohm 20W Speaker This is a modified version of the NZ-S22 8 Ohm 20W speaker, which has a proven track record as a car speaker and outdoor speaker (cable replacement version). Since the cable is replaced internally within the speaker, the waterproofing of the connection point is not compromised, but the color coding of the cable changes. Polarity: White is HOT, Black is COM For the 10m cable speaker listed on this page, the white cable color is HOT and the black is COM. (Before the cable change, red was HOT and black was COM.)

• Sound Parts

Custom product of NZ-S30 The base speaker is the NZ-S30 16 Ohm 30W, which has a proven track record for use in vehicles and outdoors. Since the cables are replaced inside the speaker, the waterproofing of the junction is not compromised. The polarity is white for HOT and black for COM. For the 10m cable speaker listed on this page, the cable colors are white for HOT and black for COM. (Before the cable change, red was HOT and black was COM.)

• Sound Parts

20W Speaker with 10m Cable This is a custom speaker that has replaced the short genuine cable of just under 1m with a 10m long cable. The cable itself has been replaced, not just added. Custom 8 Ohm 20W Speaker This is a modified version of the NZ-S20 8 Ohm 20W speaker, which has a strong track record as a car speaker and outdoor speaker (cable replacement version). Since the cable is replaced internally within the speaker, the waterproofing of the connection point is not compromised, but the color coding of the cable changes. Polarity: White is HOT, Black is COM For the 10m cable speaker listed on this page, the white cable color is HOT and the black is COM. (Before the cable change, red was HOT and black was COM.)

• Sound Parts

The long-awaited Power Giga (hands-free megaphone) series with a switch-equipped head microphone has been released. The slide switch located near the center of the microphone cable allows for ON-OFF operation of the microphone. Even when operating the switch during megaphone use, a slide switch with minimal switch noise has been adopted. The NANZU Power Giga (hands-free megaphone) series is compatible with Windows computers as well. It features a 3P plug and is a unidirectional mono microphone. The microphone tip naturally stays close to the mouth, and due to its unidirectional characteristics, it is less likely to pick up surrounding noise. The microphone frame wraps around the back of the head rather than the top, making it less likely to disturb hairstyles and ensuring it stays in place even during movement.

• Sound Parts

This is a Windows-compatible version of the highly acclaimed ear-hook microphone MIC-806, designed for hands-free use. It has a 3P plug and is a unidirectional mono microphone. The microphone's tip naturally stays close to the mouth, and due to its unidirectional characteristics, it is less likely to pick up surrounding noise. The microphone frame wraps around the back of the head rather than the top, making it less likely to mess up hairstyles and ensuring it stays in place even during movement. Due to its secure structure, prolonged use may cause discomfort from the frame's tightness. In such cases, using a neck microphone method is recommended.

• Sound Parts

Achievements in rehabilitation, etc. We have a proven track record in voice training and rehabilitation for individuals with small voices, including those who have undergone vocal cord removal surgery, have voice function disorders, dysarthria due to motor disorders, Parkinson's disease, laryngeal cancer, and esophageal speech after laryngectomy. It is also used as a vocal cord microphone for monitoring swallowing sounds in individuals with swallowing disorders. The much-requested L size is now available! While our special microphone has received positive feedback, we have also heard that it is too small for adult men with thick necks. Therefore, we have added an L size to our lineup, allowing more people to benefit from it. Hands-free megaphone optional microphone This special microphone is adopted as an optional microphone for the highly acclaimed NANZU Power Giga series (hands-free megaphone). It is placed close to the throat to pick up vibrations near the Adam's apple.

• Sound Parts

This is a custom speaker with a 10m cable, designed to meet the request for a long cable without extension. The base speaker is the NZ-S10 8 Ohm 10W, which has a proven track record for use in vehicles and outdoors. Since the cable is replaced internally within the speaker, the waterproof integrity of the connection is not compromised. For the 10m cable speaker listed on this page, the cable colors are white for HOT and black for COM. (Before the cable change, red was HOT and black was COM.) The mounting stay has been processed with holes for height adjustment in two stages!

• Sound Parts

Do you have such requests? I want to play an automatic message when customers enter the store. I want to play a product announcement message when someone approaches for audio pop-ups. I want to have automatic announcements only when someone approaches the supermarket's special sale section. I want to play explanations of exhibits only when people come to exhibitions, art museums, or museums. I want to issue a warning announcement only when someone approaches hazardous materials. I want to play a recorded message only when the company receptionist is away from her desk. This is a small message machine with a built-in recording microphone that automatically plays audio guidance when someone approaches, such as for supermarket special sale announcements, exhibition guidance in art museums or museums, and warnings in factories, triggered by a motion sensor. It can record only one message, with a maximum recording time of about 210 seconds. The recorded content is saved in MP3 data format in the built-in memory (1MB).

• Sound Parts

It reacts to temperature differences within a range of about 3 meters in the direction of approximately 120° ahead. It operates in the dark and is less affected by sunlight, making it a human detection sensor. You can select and play one message from multiple messages in MP3 format, or specify to play all messages (play all songs). The product comes with sample audio data, so you can connect it to a computer and replace the audio data yourself. You can store multiple audio data (in MP3 format) with a total of up to 4MB via a computer. You can save not just one audio data but multiple audio data. There is also a sister product (message machine) that allows you to record only one message directly on the unit without using a computer.

• Sound Parts

This is a compact speaker with a heat-resistant design that can be installed in an engine room. It can be used under harsh weather conditions with a temperature range of -10°C to 100°C. The speaker cable used is H-VFF 0.75 mm². It features a drip-proof structure, making it safe to install outdoors, on vehicles, or on ships even in rainy weather. *It is recommended to install it horizontally to prevent water from accumulating inside. Despite its small size, it is a genuine square trumpet speaker with a rated input of 10W and a rated impedance of 8Ω.

• Sound Parts

A waterproof speaker made of weather-resistant resin. The mounting brackets and screws are made of stainless steel. The thickness of the stainless steel mounting brackets is approximately 3mm, making them sturdy. A speaker cable with a length of about 1m is included.

• Sound Parts

As a 20W horn speaker, it is quite small in size, making it suitable for those looking for a compact horn speaker due to space constraints. It is a low-impedance (8Ω) type commonly used in car amplifiers. When two of these speakers are connected in parallel, the combined impedance is 4Ω. They can also be connected to a component system for use as outdoor speakers. It is a drip-proof type that can be used outdoors even in rainy weather. It comes with approximately 1 meter of highly weather-resistant cap-tire cable. The use of a cable gland prevents water ingress.

• Sound Parts

The NANZU hands-free megaphone series originated with the waist pouch-type hands-free megaphone 1C. The standard head microphone is worn by placing the glasses frame behind the head, allowing for hands-free amplification with an ear-hook microphone. It is effective for individuals with soft voices, those who have undergone vocal cord or laryngeal removal surgeries, as well as for voice training, rehabilitation, and home nursing for people with disabilities. It operates on six AA manganese or alkaline batteries. You can easily obtain batteries at convenience stores, so there's no need to worry if they run out.

• Sound Parts

The standard configuration includes a 2.4GHz band wireless microphone (transmitter). The built-in microphone of the wireless microphone (transmitter) can be switched between the built-in microphone and an external microphone with a single touch. It also comes with a mute function. Both the wireless microphone and wired microphone can be used simultaneously. You can connect a wired headset microphone to the main unit and use it as a hands-free amplifier while simultaneously using the wireless microphone (transmitter). This high-performance portable amplifier allows for the use of two microphones (a wired microphone and a wireless microphone) with just the standard configuration. The built-in speaker is an ultra-compact portable amplifier that is truly palm-sized. The Power Giga M can easily fit into a handbag. When used for work, it is not a burden to carry it home during daily commutes or while traveling on business.

• Sound Parts

By simply speaking in Japanese while pressing the translation device's button, you can issue alerts in foreign languages. It amplifies the sound with a loud megaphone, making it suitable for evacuation guidance during emergencies. The combinations of languages are flexible, allowing translations between various languages such as "Japanese to English," "Japanese to Chinese," and "English to Korean." The language can be easily changed. This megaphone is designed for disaster prevention purposes, and it is a fashionable megaphone that can also emit a siren (whoop sound) and a whistle (peep sound).

• Sound Parts

We will strongly support the increasing number of foreign tourists. When you speak in Japanese towards the attached translation device, it will immediately amplify in a foreign language. Selecting the translation language is easy with menu operations. You can choose from 48 languages. For example, switching between 'Japanese ⇔ English', 'Japanese ⇔ Chinese', and 'Japanese ⇔ Korean' is simple. It can be used with a WiFi connection within the facility. The insertable nano SIM card is SIM-free, and even outdoors or while traveling, you can choose from four translation engines for optimal translations.

• Sound Parts

The microphone itself has a built-in echo circuit, allowing you to connect it directly to a broadcast amplifier without going through a mixer, enabling the use of echo. The power required for the echo function is provided by a single AA battery, which is easily obtainable anywhere, so you can be assured even in case of an unexpected battery depletion. Please do not use rechargeable batteries, as their voltage of 1.2V is too low.

• Capacitor

The standard set includes the "main unit," "microphone included with the main unit," "subunit speaker microphone," and "AC adapter." It is a simple intercom that requires no wiring work; you can use it by simply plugging each cable's plug into the main unit jack, and it operates on AC 100V.

• Capacitor

Even broadcasting devices and amplifiers with only one microphone input jack can use three microphones. You can utilize multiple microphones easily and inexpensively without using an expensive microphone mixer.

• Capacitor

Long type, height 225–340mm

• Capacitor

Short type desktop microphone stand with a height of 130 to 175 mm.

• Capacitor