プロテック List of Products and Services

This is a "small air press machine" that accommodates the installation of fixtures for functional testing of small-sized substrates, operated by a movable air cylinder. Press operations are performed using both hands with a control box, but PC control can also be added upon request. Additionally, by adding area sensors, safety during pressing is taken into consideration. Please feel free to consult us regarding specifications.

• Circuit Board Inspection Equipment

This is an introduction to the production case of Protech's shield box and radio wave dark box. It is a production case of a window-type shield box for inspecting circuit boards of wireless communication devices. Inside, there is a fixture built in for inspecting the circuit boards of communication device terminals. The visible window allows for visual confirmation of the inspection status. For more details, please refer to the catalog or contact us.

• EMC Testing

This is an introduction to the production case of Protech's shield box and radio wave dark box. It is a shield box with an integrated hand press handle. This is a production case of a shield box made for RF characteristic testing and circuit board function testing. Since the inspection jig is built into the interior of the box and a lever for hand pressing is added to the exterior, it allows for a compact overall design. For more details, please refer to the catalog or contact us.

• EMC Testing

This is an introduction to the production case of Protech's shield boxes and radio wave dark boxes. It is a large shield box for communication testing of vehicle-mounted wireless components. The dimensions are approximately W1200 × D2500 × H1400. This is a production case of a shield box made for millimeter-wave radar. For more details, please refer to the catalog or contact us.

• EMC Testing

This is an introduction to the production case of Protech's shield box and radio wave dark box. It is a large shield box for communication testing of vehicle-mounted wireless components. The dimensions are approximately W1350×D1120×H1840, and it weighs about 350 kg. It achieves a shielding performance of over -80dB in the frequency band of 400MHz. The larger size allows for communication distances that are closer to real-world conditions. For more details, please download the catalog or contact us.

• EMC Testing

This is an introduction to the production case of Protech's shield box and radio wave dark box. It is a large shield box for testing communication equipment terminals at base stations. Inside, there is a slide table with a load capacity of 50 kg, making it easy to insert and remove the test objects. Additionally, it is equipped with service outlets for AC 100V/200V, and with the installation of filters, it can be used without leaking radio waves to the outside. The use of a honeycomb structure for the radiation holes prevents external leakage of radio waves. For more details, please download the catalog or contact us.

• EMC Testing

Protech's "Load Torque Measuring Device" is composed of a built-in torque sensor and a multifunctional controller, allowing for the measurement of torsional stress in various products, including mechanical component parts. We offer a wide variety of control methods, responsiveness, and detection processing tailored to a diverse range of test specimens. Please make use of it for various torque measurements, such as load tests and durability tests.

• Torque Meter

Protech's "Load Torque Measuring Device" is composed of a built-in torque sensor and a multifunctional controller, allowing for the measurement of torsional stress in various products, including mechanical component parts. It is used for product performance testing of ball screws, bearings, hinges, dampers, gears, screws, and many other mechanical component parts. We offer a wide variety of control methods, responsiveness, and detection processing suitable for a diverse range of test specimens. Please make use of it for various torque measurements, such as load tests and durability tests.

• Torque Meter

Protech's "Load Torque Measuring Device" is composed of a built-in torque sensor and a multifunctional controller, allowing for the measurement of torsional stress in various products, including mechanical component parts. It is used for performance evaluation of numerous mechanical components such as dampers, hinges, ball screws, bearings, gears, and screws. We offer a wide variety of control methods, responsiveness, and detection processing tailored to a diverse range of test components. Please make use of it for various torque measurements, such as load tests and durability tests.

• Torque Meter

Protech's "Load Torque Measuring Device" is composed of a built-in torque sensor and a multifunctional controller, allowing for the measurement of torsional stress in various products, including mechanical component parts. It is particularly adopted for quality evaluation of medical devices such as disposable items like catheter tubes, guide wires, and syringes, as well as implant screws. Additionally, considering ease of use, we offer various dedicated measuring devices for stress measurement of disposable items, which are widely used by numerous medical device manufacturers. We provide a rich variety of control methods, responsiveness, and detection processing tailored to a diverse range of test specimens. Please make use of our device for various torque measurements, including load tests and durability tests.

• Torque Meter

Protech's "Torque Measurement Device" is composed of a built-in torque sensor and a multifunctional controller, allowing for the measurement of torsional stress in various products. We offer a wide range of control methods, responsiveness, and detection processing tailored to a diverse array of test specimens. Please make use of it for various torque measurements, such as load tests and durability tests. It has been adopted by many medical device manufacturers, and we also provide testing machines specifically designed for torsion tests of medical disposable items, such as catheters, guide wires, and anti-interconnection connectors. If you are considering torsional stress testing for medical devices, please feel free to contact us.

• Torque Meter

Protech's "Guide Wire Transmission Characteristic Evaluation Tester" can measure the fine torque characteristics of the tip of micro guide wires and catheters, as well as the angle transmission characteristics of input and output. The data during measurement is displayed in real-time on a graph. Measurement data can be saved in CSV file format. The catalog provides an overview of the measuring instrument, sample graph screens, measurement examples, and more.

• Torque Meter

Protech's "Guide Wire Transmission Characteristics Evaluation Tester" can measure the fine torque characteristics of the tip of micro guide wires and catheters, as well as the angle transmission characteristics of input and output. With the adoption of full posture air bearings, it is capable of measuring torques below 1mNm, with a measurement resolution of 0.01mNm. The catalog includes an overview of the measuring instrument, measurement examples, and photos of the internal sensors!

• Torque Meter

We are currently offering a free catalog featuring "torque measuring devices" for the development and quality inspection of "medical devices" such as guidewires, catheters, endoscopes, bone screws, and anti-interconnection connectors! Previously, the evaluation of "operational feel" was conducted by human hands and visual inspection. We offer a variety of measuring devices capable of conducting tests in accordance with ISO, JIS, ASTM, etc., for the development and quality inspection of "medical products." Our stress measuring devices enable high-precision measurements with the aim of meeting PMDA quality standards. Automation and data collection of tests can enhance measurement accuracy and improve efficiency. 【Product Lineup (Partial)】 ■ Guidewire Transmission Characteristics Measuring Device Measurement of minute torque and angle transmission characteristics at the tip of catheters and guidewires. ■ Guidewire Friction Sliding Testing Machine ■ Mechanical Properties Measuring Device for Bone Screws JIS T0311/ASTM F543-07 Torsional failure, screwing, and pull-out tests. ■ Anti-Interconnection Connector Testing Machine ISO80369 Pre-assembly before testing, torsional stress testing. *We are currently offering a free catalog where you can view the latest lineup. Please feel free to contact us for inquiries.

• Testing Equipment and Devices

The mechanical property measurement device for stent grafts is a tensile and compressive stress measuring instrument capable of conducting tests in accordance with "JIS T 0401 Mechanical Testing Methods for Stent Grafts." It can measure "radial force," which is effective in preventing perigraft leaks and migration in stent grafts, as well as "flexibility," which is effective in preventing kinking. The measurement results are displayed in real-time graphs on a computer, and data can also be saved in CSV file format.

• Torque Meter

This press machine is a high-load "Air Press Machine for Circuit Board Inspection" (circuit board inspection machine) that improves the number of compatible pins and the size of compatible circuit boards compared to conventional hand press machines, thanks to its air press operation controlled by button presses. The pressing operation can be performed with both hands using button controls. The fixture is interchangeable, allowing for the connection of various inspection circuit boards. It is highly versatile and offers excellent overall cost performance. Additionally, there are many options available. For more details about this press machine, please refer to the catalog.

• Circuit Board Inspection Equipment

Leave the caramel wrapping, shrink wrapping, and assembly of CDs/DVDs to us!

• others

Free gift of a "Manufacturing Case Collection" for shield boxes and anechoic chambers, essential for wireless testing of communication equipment! Featuring lightweight and compact standard type "PSB series," automatically opening and closing with a switch operation "Air Cylinder Opening and Closing Shield Box," "Mobile Device Inspection Line" for use in inspection lines, "Automatic Open Specification" with a function to automatically open for passing items, and "Large Shield Box" for testing communication device terminal base stations and vehicle-mounted wireless components, we present numerous manufacturing examples of shield boxes and anechoic chambers essential for wireless communication equipment testing! 【Features】 ■ Lightweight, compact, and high performance ■ Customizable ■ Transparent window for visibility inside is also possible ■ RF connectors other than SMA can be changed ■ External connection connectors (with built-in filter) are also available ■ Numerous manufacturing examples included 【Examples Included】 ■ Simple shield box for mobile device inspection line ■ Window type shield box for mobile device circuit board inspection ■ Automatic open specification (motor type) ■ Hand press integrated shield box ■ Shield box for communication inspection of vehicle-mounted wireless components *For more details, please download or contact us.

• EMC Testing

This press machine is a high-load "Air Press Machine for Circuit Board Inspection" (circuit board tester) that improves the number of compatible pins and the size of compatible boards compared to conventional hand press machines, thanks to its air press operation controlled by button presses. The pressing operation can be performed with both hands using button controls. The fixture is interchangeable, allowing for various inspection boards to be connected. It is highly versatile and offers excellent overall cost performance. Additionally, there are many options available. For more details about this press machine, please refer to the catalog. We are currently offering the catalog for free! Please feel free to download it.

• Circuit Board Inspection Equipment
• Inspection fixture
• Printed Circuit Board

This is a connector testing machine that complies with ISO 80369, designed for "pre-test assembly (fitting)" and "torsional stress testing." It is compatible with ISO 80369-3 for enteral nutrition (ENFif), ISO 80369-6 for neuroanesthesia, and ISO 80369-7 for subcutaneous injection and vascular systems. Measurement results are displayed in real-time graphs, and measurement data can be saved in CSV format. Parameters can be set arbitrarily, allowing for easy testing of various lure connectors that require high-precision numerical management. In addition to position control functionality, the addition of torque control functionality enables more detailed condition settings. If you choose the optional touch panel, there is no need for a computer. It is widely adopted by major medical device manufacturers! **Features** - Capable of testing interconnection prevention connectors in compliance with ISO 80369 - Capable of pre-test assembly (fitting) and torsional stress testing - Automation and data processing of tests - Real-time graph display of measurement results on a PC - Test data can be saved in CSV format - Arbitrary setting of measurement conditions, making it easy to test ISO 80369 - Easy operation with a touch panel (optional) - Lightweight and compact, with a convenient handle for portability

• Testing Equipment and Devices

We are manufacturing a "Stamp Unit Mechanism" for stamping items such as qualification stamps and lot numbers. It is highly durable and can be used with minimal maintenance. We offer two types: air type and electronic solenoid type. The shape of the mounting metal can be changed according to customer requests. ■ Air Type The air type stamp unit can arrange 12 characters in 2 rows with a font size of 13.75 pt. It also supports character rearrangement. There is a version with a lid that can accommodate highly volatile inks. ■ Electronic Solenoid Type The electromagnetic solenoid type stamp unit can use commercially available bookkeeping stamps. *For more details, please download the catalog or contact us.

• others
• Contract manufacturing

Protech's "Universal Testing Machine PU-1000" is a measuring device that can measure three types of stress: torsion, tension, and compression, all in one unit. It can be used not only for stress measurement of various mechanical component parts but also for testing the transmission characteristics of ball screws, tensile fracture testing of wires in the medical field, three-point bending tests, tensile and torsion measurements of tubes, and mechanical property testing of metal bone screws in accordance with JIS T 0311.

• Testing Equipment and Devices

The Protech "Compact Universal Testing Machine PU-100" can measure the "tensile stress" and "compressive stress" of various component parts such as machinery and medical devices. With a wide range of load cell variations, we offer control methods suitable for a diverse array of test components. Additionally, by replacing the load cell with a torque sensor, it is also possible to measure "torsional stress (torque)."

• Torque Meter

This is a device for measuring the RGB values of LEDs when they are lit and conducting performance evaluations. It can perform performance evaluation tests not only on LEDs on the substrate but also on various shapes of LEDs. We will provide the best proposal tailored to your specific challenges, so please feel free to contact us.

• Other inspection equipment and devices

Currently, the inspection process for circuit boards performed by humans can be fully automated using collaborative robots. By modifying the hand lever of the hand press machine to be operated by a collaborative robot and adding an automatic start function, it can be used. The entire process, from setting the inspected circuit board in the press machine to sorting and discharging the finished products and defective products after completion, can be performed entirely by the collaborative robot. This is recommended for those who want to automate and streamline the current process. Customers considering new implementation are also welcome to consult with us.

• Circuit Board Inspection Equipment

Protech offers paid data measurement services (contract measurement) for torque measurement and stress characteristics of medical devices and equipment (guide wires, catheters, bone screws/JIST0311), various motors, and mechanical component parts (ball screws, hinges, dampers).

• Contract measurement

This measuring device is a "stirring torque measuring instrument" developed using a load torque meter. It is composed of a built-in sensor for driving, a highly versatile load torque measuring device, and a highly flexible frame. The motor built into the sensor allows the sensor axis to rotate on its own, measuring the load torque. It is possible to adjust the support position of the container and the position of the sensor, allowing you to use the container you currently have. In addition to measuring load torque and static friction torque, it is also capable of measuring viscosity coefficients.

• Torque Meter

Protech's "Guide Wire Friction Sliding Tester" allows for testing by applying friction to guide wires and catheters by sliding a friction plate at a constant speed. Equipped with a warm water tank, it enables testing in water maintained at a constant temperature (room temperature to 40 degrees ±2 degrees). This allows for testing in conditions close to the internal environment of the body. Measurement results are displayed in real-time as graphs on a PC, and measurement data can be saved in CSV file format. Additionally, parameters can be set arbitrarily. It is capable of conducting 500 durability reciprocating tests.

• Testing Equipment and Devices

With Protech's "Guide Wire Sliding Stress Measurement Device," you can measure frictional force by rotating the roller with a torque sensor on the hand side, pressing the guide wire into the template, and pulling it out. It is possible to continuously measure the pushing and pulling forces, and repeated back-and-forth measurements can also be conducted. The measurement results are displayed in real-time as graphs on a PC, and the measurement data can be saved in CSV file format. Additionally, parameters can be set as desired.

• Testing Equipment and Devices

This device is used to conduct rotation tests (idling without torque load) up to the maximum rotational speed specification of the torque converter. Various operations and displays are performed on a touch panel screen.

• Other measurement, recording and measuring instruments

This is a collection of case studies for motor torque measuring devices capable of evaluating various types of motors! - "Motor Torque Measuring Device - Hysteresis Brake Method" suitable for measuring the DC characteristics of brushless motors. - "Motor Torque Measuring Device - Motor Brake Method" optimal for load testing of motors requiring high responsiveness. - "Motor Torque Measuring Device - Powder Brake Method" ideal for load testing of large-capacity motors. - "High-Speed Motor Measuring Device" capable of load testing ultra-high-speed motors up to 60,000 rpm. - "Comprehensive Measuring Device for Stepper Motors" capable of measuring detent torque, θ-T characteristics, pull-in characteristics, pull-out characteristics, and more. - "Cogging Torque Measuring Device" capable of measuring motor cogging. - "Comprehensive Measuring Device for Motor Torque Compatible with Temperature and Humidity Environment" suitable for environmental testing of onboard motors. And more are included. We are currently offering a free catalog! Please download it!

• Torque Meter

Protech's "Shield Box - RF Shielded Enclosure" provides an environment that "blocks external radio waves and prevents internal radio waves from leaking outside" for the inspection of various communication devices, including smartphones, tablets, wireless LAN (Wi-Fi), Bluetooth, and low-power wireless communications in the 920MHz band represented by smart meters (Wi-SUN). It can be widely used from production to quality control and development. The RF shielded enclosure prevents radio wave scattering by covering the interior with a radio wave absorber, minimizing the impact on device inspections. The Shield Box PSB-500A is a shielded box that features an air cylinder for automatic opening and closing, based on the PSB-500 model. The external dimensions are W670×D750×H320 (base dimensions) and W450×D500×H300 (box dimensions). It supports frequency ranges from 430MHz to 6GHz, with shielding performance of -60dB or more. Due to its automatic opening and closing feature, optional area sensors can be installed around the box to ensure safety during operation. For more details about the product, please refer to the catalog. *We offer a wide range of options based on external dimensions, shielding performance, specifications, and more.

• EMC Testing

Protech's "Shield Box / RF Shielded Enclosure" provides an environment that "blocks external radio waves and prevents internal radio waves from leaking outside" for testing various communication devices, including smartphones, tablets, wireless LAN (Wi-Fi), Bluetooth, and low-power wireless communications in the 920MHz band represented by smart meters (Wi-SUN). It can be widely used from production to quality control and development. The RF shielded enclosure prevents radio wave scattering by covering the interior with a radio wave absorber, minimizing the impact on device testing. The Shield Box PSB-400A is a shielded box that features an air cylinder for automatic opening and closing, based on the air cylinder opening and closing mechanism of the PSB-400. The external dimensions are W570×D650×H270 (base dimensions) and W350×D400×H250 (box dimensions). It supports frequency ranges from 430MHz to 6GHz, with shielding performance of -60dB or more. Due to its automatic opening and closing feature, optional area sensors can be installed around the box to ensure safety during operation. For more details about the product, please refer to the catalog. *We offer a wide range of lineups based on external dimensions, shielding performance, specifications, and more.

• EMC Testing

Protech's "Shield Box - Radio Wave Absorbing Box" provides an environment that "blocks external radio waves and prevents internal radio waves from leaking outside" for the inspection of various communication devices, including smartphones, tablets, wireless LAN (Wi-Fi), Bluetooth, and low-power wireless (Wi-SUN) represented by the 920MHz band. It can be widely used from production to quality control and development. The radio wave absorbing box prevents radio wave scattering by covering the inside of the box with a radio wave absorber, minimizing the impact on device inspection. The Shield Box PSB-300A is a shield box that enables automatic opening and closing by adding an air cylinder to the PSB-300, utilizing an air cylinder opening and closing mechanism. The external dimensions are W470×D550×H270 (base dimensions) and W250×D300×H250 (box dimensions). It supports frequency bands from 430MHz to 6GHz, with shielding performance of -60dB or more. As it is an automatic opening and closing type, optional area sensors can be installed around the box to ensure safety during opening and closing. For more details about the product, please refer to the catalog. *We offer a wide range of lineups based on external dimensions, shielding performance, specifications, and more.

• EMC Testing

Protech's "Shield Box - RF Shielded Enclosure" provides an environment that "blocks external radio waves and prevents internal radio waves from leaking outside" for the inspection of various communication devices, including smartphones, tablets, wireless LAN (Wi-Fi), Bluetooth, and low-power wireless communications in the 920MHz band represented by smart meters (Wi-SUN). It can be widely used from production to quality control and development. The RF shielded enclosure prevents radio wave scattering by covering the interior with a radio wave absorber, minimizing the impact on device inspections. The Shield Box PSB-500 is one of the standard models in the PSB series. Its external dimensions are W450×D500×H300 (box exterior), it supports frequency ranges from 430MHz to 6GHz, and its shielding performance exceeds -60dB. For more details about the product, please refer to the catalog. *We offer a wide range of lineups depending on external dimensions, shielding performance, specifications, and more.

• EMC Testing

Protech's "Shield Box - Radio Wave Absorbing Box" provides an environment that "blocks external radio waves and prevents internal radio waves from leaking outside" for the inspection of various communication devices, including smartphones, tablets, wireless LAN (Wi-Fi), Bluetooth, and low-power wireless communications in the 920MHz band represented by smart meters (Wi-SUN). It can be widely used from production to quality control and development. The radio wave absorbing box prevents radio wave scattering by covering the interior of the box with a radio wave absorber, thereby minimizing the impact on device inspections. The Shield Box PSB-300 is one of the standard products in the PSB series. Its external dimensions are W250×D300×H250 (box outer dimensions), it supports frequency bands from 430MHz to 6GHz, and its shielding performance meets -60dB or more. For more details about the product, please refer to the catalog. *We offer a wide range of lineups based on external dimensions, shielding performance, specifications, and more.

• EMC Testing

Protech's "Shield Box - RF Shielded Enclosure" provides an environment that "blocks external radio waves and prevents internal radio waves from leaking outside" for the inspection of various communication devices, including smartphones, tablets, wireless LAN (Wi-Fi), Bluetooth, and low-power wireless communications in the 920MHz band represented by smart meters (Wi-SUN). It can be widely used from production to quality control and development. The RF shielded enclosure prevents radio wave scattering by covering the interior of the box with a radio wave absorber, thereby minimizing the impact on equipment inspection. The Shield Box PSB-400 is one of the standard models in the PSB series. Its external dimensions are W350×D400×H250 (box exterior), it supports frequency ranges from 430MHz to 6GHz, and its shielding performance exceeds -60dB. For more details about the product, please refer to the catalog. *We offer a wide range of lineups based on external dimensions, shielding performance, specifications, and more.

• EMC Testing

Protech's "Shield Box - RF Shielded Box" provides an environment that "blocks external radio waves and prevents internal radio waves from leaking outside" for the inspection of various communication devices such as smartphones, tablets, wireless LAN (Wi-Fi), Bluetooth, and low-power wireless communications in the 920MHz band represented by smart meters (Wi-SUN). It can be widely used from production to quality control and development. The Shield Box PSB-105 is one of the budget models in the PSB series. Its external dimensions are W450×D500×H300 (box exterior), it covers a frequency range of 430MHz to 6GHz, and it supports shielding performance of -30dB or more. For more details about the product, please refer to the catalog. *We offer a wide range of lineups depending on external dimensions, shielding performance, specifications, and more.

• EMC Testing

Protech's "Shield Box - Radio Wave Shielding Box" provides an environment that "blocks external radio waves and prevents internal radio waves from leaking outside" for the inspection of various communication devices such as smartphones, tablets, wireless LAN (Wi-Fi), Bluetooth, and low-power wireless communications in the 920MHz band represented by smart meters (Wi-SUN). It can be widely used from production to quality control and development. The Shield Box PSB-104 is one of the budget models in the PSB series. Its external dimensions are W350×D400×H250 (box exterior), it covers a frequency range of 430MHz to 6GHz, and it supports shielding performance of -30dB or more. For more details about the product, please refer to the catalog. *We offer a wide range of lineups depending on external dimensions, shielding performance, specifications, and more.

• EMC Testing

Protech's "Shield Box - RF Shielded Box" provides an environment that "blocks external radio waves and prevents internal radio waves from leaking outside" for the inspection of various communication devices, such as smartphones, tablets, wireless LAN (Wi-Fi), Bluetooth, and low-power wireless communications in the 920MHz band represented by smart meters (Wi-SUN). It can be widely used from production to quality control and development. The Shield Box PSB-103 is one of the budget models in the PSB series. Its external dimensions are W250×D300×H250 (box exterior), it covers a frequency range of 430MHz to 6GHz, and it supports shielding performance of -30dB or more. For more details about the product, please refer to the catalog. *We offer a wide range of models based on external dimensions, shielding performance, specifications, and more.

• EMC Testing

We provide comprehensive support from OEM production to the design, development, and manufacturing of new equipment. We respond to various customer requests with a thorough management system for both quality and schedule, ensuring low costs and short delivery times. "I am looking for a reliable contract manufacturer." "It's not a quantity that justifies setting up a production line, but securing manpower on the same day is difficult." "There are not many manufacturers willing to produce small lots." "I would like assistance not only with assembly production but also from the development and design stages." We respond to such customer requests. We can produce from small lots. Please feel free to contact us.

• Contract manufacturing

The multi-function inspection system for printed circuit boards and electronic devices, 'Future 3000', allows for easy configuration of inspection devices for circuit boards and functional testing devices for electronic equipment by combining an MCU board with various measurement circuit boards. The MCU board is equipped with standard control functions for the inspection circuit boards, as well as for the display, pass stamp, start/stop switch, lamp, and buzzer. The inspection circuit boards are prepared with the minimum necessary functions for inspection, such as AD and wind comparators. By combining these inspection circuit boards, you can easily build an inspection system. We will create the inspection sequence based on your inspection specifications. Additionally, if you choose a touch panel display for the display unit, you can change the condition settings for Pass and Fail on your side. Please take a look at our catalog.

• Circuit Board Inspection Equipment

We are manufacturing a "Stamp Unit Mechanism" for stamping items such as approval stamps and lot numbers. It boasts excellent durability and can be used with minimal maintenance. We offer two types: air type and electronic solenoid type. The shape of the mounting metal can be changed according to customer requests. ■ Air Type The air type stamp unit can arrange 12 characters in 2 rows with a character size of 13.75 pt. It also supports rearranging characters. There is a version with a lid that can accommodate highly volatile inks. ■ Electronic Solenoid Type The electromagnetic solenoid type stamp unit can use commercially available bookkeeping stamps. *For more details, please download the catalog or contact us.

• others

Our company has over 30 years of experience in the production of fixtures and has delivered more than 1,000 units annually. We can manufacture various types of fixtures tailored to needs, from evaluation to mass production. With our "integrated production system," where design, drilling, assembly, and inspection are all conducted in-house, we can provide reliable products with high precision, quickly, and at a low cost.

• Inspection fixture

Protech handles circuit board inspection equipment and circuit board inspection jigs. We prioritize ease of use for our customers in the design of our enclosures. We offer products such as the "Hand Press Type - Single Side" for use when there are pin alignment points only on the solder side of the inspected circuit board, the "Hand Press Type - Double Side" for use when there are pin alignment points on both sides of the solder, and the "Air Press Machine" which operates with a two-hand switch for air press actions. Additionally, you can also view numerous examples of circuit board inspection machines, including "LED Inspection Equipment" and "Collaborative Robot Operated Circuit Board Inspection Equipment."

• Circuit Board Inspection Equipment