アローセブン List of Products and Services

We would like to introduce the "Wireless Equipment Signal Collection System for Factory Visualization." By connecting wireless subunits to on-site equipment, signal information (digital, analog, pulse) from the site is collected by a wireless master unit (network master), and the collected signal information can be utilized with PCs or PLCs. When utilized, it allows for real-time monitoring of the equipment's status on-site, enabling rapid response to any abnormalities, among other benefits. 【Key Points】 - Data can be imported in CSV format from the wireless master unit, making it usable for applications and data analysis. - Easy operation and embedded control can be achieved by accessing specific addresses. - Not only can signal information be collected, but also processing can be done from PCs or PLCs to wireless signal terminals. 【Benefits】 - Real-time understanding of the equipment's status on-site. - Rapid response to abnormalities. - Improvement of production efficiency using data collected from equipment. - Easy installation and removal of equipment allows for flexible layout. - Since it operates in the 920MHz band, it can be implemented without affecting the network in Wi-Fi-utilized areas. *For more details, please download the PDF or feel free to contact us.

• Other information systems
• Signal Generator

The VIT-200R is a measurement unit capable of analyzing and determining wideband vibrations up to 200 kHz. In addition to 2-channel piezo vibration sensor inputs, it has 2 channels of analog signal input, allowing for complex judgments (software customization). It can be applied in various fields such as detecting abnormalities and precursors in equipment, measuring the condition of structures, and determining the results of manufacturing processes. The procedure for using the standard functions is as follows: 1. Connect to a PC and acquire vibration data in multiple patterns. 2. Perform judgment simulations on the PC while changing the judgment mode and judgment values. 3. Write the determined judgment values and measurement trigger conditions to the VIT-200R. 4. Measurement and judgment results are output each time a trigger occurs. 5. The VIT-200R main unit outputs error judgment relay signals, while the PC receives waveform data and judgment results. 6. The PC retains the measurement data and judgment results from each measurement. The judgment modes include peak value judgment, area value judgment, and frequency component value judgment. The trigger modes can be set to periodic time from the PC, contact input, Ethernet packet, or delay time. It can also be used as a vibration data acquisition and viewing system.

• Instrumentation and Control Systems

It can be used without experiencing wireless interference in a Wi-Fi environment. It is possible to wireless-enable without affecting existing software. The communication rates can support 4800bps, 9600bps, 19200bps, and 38400bps. Communication channels can be selected from 38 channels.

• Wireless LAN

The in-house pager system and pocket calling terminal 'PCall-1' is a calling system that instantly notifies the terminal from a calling switch or abnormal output signals from an automatic calling unit. It operates in the 920MHz band and can be used without interfering with Wi-Fi. Expanding the communication range through wireless relay stations is also easily achievable. It supports customization to meet the needs of different sites and can perform calls using a light sensor to activate the display light. 【Features】 ■ Capable of sending messages to multiple terminals from a calling switch ■ Automatic calling based on abnormal outputs from equipment ■ Easy integration with multiple devices and equipment ■ Can also be linked with a forklift calling system * We are currently offering product introduction materials with usage examples. Please check them out via "PDF Download."

• Communications

Real-time monitoring of the operating status from each device is connected to the PLC via a monitor. By connecting the PLC and PLC display unit to the network master (wireless base station), you can check the operating status of the equipment. The PLC display unit can display up to 32 devices with the following features: 1. Operating status of the equipment (processing, abnormal stop, standby, maintenance). 2. Operating summary display for each device (processing time, abnormal stop time, number of occurrences, maintenance time, setup time, standby time) is standard. 3. The PLC and PLC display unit can be customized by the user. 4. By understanding the operating status, it is possible to grasp production capacity. 5. Terminal settings can be done without a PC. 6. A system can be implemented that is not affected by Wi-Fi due to the 920 MHz wireless frequency.

• Wireless LAN

This is a system that reports abnormal occurrences to the management location when an abnormal signal is emitted from factory equipment. The abnormal signals from the factory equipment are input into the UMDI-41AXS and transmitted via 920MHz wireless communication to the UMIO-88AXS at the management location. The setup software for the UMIO-88AXS and UMDI-41AXS can be downloaded for free from our company website. - Easy setup by connecting the PC to the device via cable. - Communication range of 1 km in outdoor line of sight. - Communication using repeaters is possible. - Repeater settings can also be configured with the same software. Signal collection for the documentation is done via 1-to-N communication. Example: 1-to-N (1 point dispersed mode) setting. In the case of one master unit, UMIO-88AXS, and one slave unit, UMDI-41AXS (1 point input), a maximum of 8 slave units can be configured for an abnormal signal monitoring system. A demo unit is also available for your use.

• Wireless LAN

We would like to introduce a case study of the FA-related wireless system implemented by Arrow Seven Co., Ltd. Case Study Interference between wireless LAN equipment and analog signals prevents successful integration into the PLC. We want to measure all signals with a PC or PLC. Arrow Seven provides a system that acquires analog signals, performs A/D conversion, and directly writes data to the memory of devices such as PCs or PLCs after wireless transmission. By using the 920MHz band for wireless frequency, we can avoid interference with other wireless LANs, enabling real-time measurement of analog signals.

• Wireless LAN
• PLC
• Data Logger

Do you have any of the following concerns? - Occasional delays or interruptions in communication - Limitations in communication range, preventing wide-area communication - Lack of flexibility in the system, making customization impossible - Difficulty in the setup process, with no time to research If you have any of the above concerns, please feel free to consult with Arrow Seven. 'Poke Call one' is a pager system that allows for clear notifications during calls on manufacturing lines or in the event of abnormalities in machine tools. In the case of calls on the manufacturing line, operators can easily convey the call requirements by simply pressing the call switch. Additionally, by utilizing light sensors, it is possible to convert the lighting and extinguishing of equipment indicator lights into signals for call notifications. 【Features】 - High response: Even when using relay devices to extend communication distance, the response is quick. - Wide range: The 920MHz band allows for long communication distances from the main unit. - Customizable: It is possible to build a communication environment tailored to your on-site conditions. *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools
• Other FA equipment
• Mobile phones, PHS, data communication cards

Do you have any of these concerns? - Too many unnecessary round trips - Having to go call for a forklift each time - Wasting time waiting for the forklift to arrive Arrow Seven's wireless forklift calling system 'FORKS-R' enhances collaboration between drivers and workers, reducing unnecessary movements within the factory. Workers can press a button to "call" for the items they need transported, and drivers will see the "items to be transported" and "destination" displayed on their onboard terminal. The system indicates whether a request has been received or completed based on the number of times the screen lights up, eliminating worries about missed transports. If you are looking to make on-site operations more efficient, please feel free to reach out to us.

• Wireless LAN

Arrow Seven is a company that coordinates the digital transformation (DX) of factories by visualizing them through wireless technology. It is often heard that setting up a wired network incurs time, effort, and costs due to tasks like wiring network cables. Additionally, with wireless LAN, there can be interference, leading to inconsistent speeds. Here, why not consider introducing a wireless solution using an unused frequency band as a third option? Arrow Seven's wireless system contributes to the DX of factories by using a frequency band that is easy to expand and does not suffer from interference. Furthermore, we offer custom-made proposals for application development for measurement, in addition to product development, tailored to our customers' needs. Would you like to implement your company's original solution? 【Features】 - Automatic collection of production information via wireless - Graphing in Excel - Easy data transfer in conjunction with production management systems For more details, please contact us or download the catalog.

• Other network tools

"Poke Call One" is a pager system that allows for clear calls during manufacturing line operations or in the event of abnormalities in machine tools. In the case of calls on the manufacturing line, operators can easily convey calling requirements by simply pressing the call switch. Additionally, by utilizing light sensors, it is possible to convert the lighting and extinguishing of equipment indicator lights into signals for call notifications. 【Features】 ■ High response: Even when using relay devices to extend communication distance, the response remains fast. ■ Wide range: The 920MHz band allows for long communication distances from the main unit. ■ Customizable: It is possible to build a communication environment tailored to the customer's site conditions. ■ Easy to understand: Calls can be made with assigned requirements. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

We would like to introduce a case study of the FA-related wireless system implemented by Arrow Seven Co., Ltd. This system acquires analog signals, performs A/D conversion, and directly writes data to the memory of PCs or PLCs after wireless transmission. By using the 920MHz band for wireless frequency, it is possible to avoid interference with other wireless LAN devices. Real-time measurement of analog signals promotes the visualization of factories. 【Case Overview】 ■ Achieves analog input to digital output via wireless transmission ■ Features: Capable of transmission up to 2 km ■ Products used: - UMAI/UMAO-411 - Network Master *For more details, please refer to the PDF document or feel free to contact us.

• Wireless LAN

"PCall-1" is an in-house pager system that ensures reliable calling through sound, vibration, and messages. It is a portable pocket-type device equipped with a strap attachment. With its response function, you can feel secure on-site, and the calling messages can be easily configured using a management PC. 【Features】 ■ Reduces running costs compared to providing mobile phones ■ Comes with a strap attachment ■ Reliable calling through sound, vibration, and messages ■ Immediate peace of mind on-site with the response function ■ Calling messages can be easily configured using a management PC ■ Covers a wide area with 920MHz band wireless *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Communications

The "UMDO-41AXS" is a 920MHz band low-point signal unit equipped with 1 relay output and 4 digital outputs. It transmits signals input to the UMDI-41AXS wirelessly to the UMDO-41AXS, allowing the display lamp to be lit and signals to be extracted from the output terminals. The operation status can be confirmed via the LED lamp on the output monitor. 【Features】 ■ 920MHz band low-point signal unit with 1 relay output and 4 digital outputs ■ No license application or qualifications required ■ Various antennas can be selected according to the application ■ Connection is easy with screwless push-type wiring ■ Power supply can be DC 9V to 28V or a dedicated AC adapter (DC 12V) *For more details, please refer to the PDF document or feel free to contact us.

• Signal Generator
• Image Transmission Equipment

The "UMDI-41AXS" is a low-point signal unit that operates in the 920MHz band, equipped with 4 digital inputs and 1 digital output. Due to the low point count, it is possible to reduce the price when configured in a 1:N setup (multiple units), and no license application or qualification is required. The antenna (sold separately) can be selected according to the application, and the connection is easy with a screwless push type. 【Features】 - The low point count allows for a price reduction in a 1:N configuration (multiple units). - Power supply can be DC 9V to 28V or a dedicated AC adapter (DC 12V). - Connection is easy with a screwless push type. - Operational status can be confirmed with an LED lamp. - Antennas can be selected according to the application. *For more details, please refer to the PDF document or feel free to contact us.

• Signal Generator
• Image Transmission Equipment

The "LSMO1/STUO1/STUO4" is a light sensor converter that simply attaches to indicator lights or LED lamps to convert their on/off status into digital signals. The dip switches on the sensor conversion unit (STUO4) allow for adjustments to the threshold based on the brightness of the indicator lights or LED lamps. The light sensor module "LSMO1" detects the on/off status of indicator lights or lamps, and the sensor conversion units, either the 4-point type "STUO4" or the 3-point type "STUO1," output this as a digital signal (ON/OFF). 【Features】 ■ Simply attach to indicator lights or LED lamps ■ Converts on/off status into digital signals ■ STU04 has an added illuminated monitor LED for better visibility ■ Detects the on/off status of indicator lights or lamps with the light sensor module ■ Outputs digital signals (ON/OFF) with the sensor conversion unit ■ The brightness threshold that the light sensor module LSM01 responds to can be individually set/changed using the dip switches on STU04 *For more details, please refer to the PDF document or feel free to contact us.

• Lamps and light emitting devices

Various residual sensors' signal levels can be collected wirelessly. Since no wiring is required, it can be implemented at low cost and in a short period of time. Additionally, it can be introduced without stopping factory operations.

• LAN construction and wiring work

The "UMIO-88" is a new type of unit equipped with 8 input and 8 output ports. Connections are made with a screwless push type, making wiring easy. The power supply can be DC 9V to 28V or a dedicated AC adapter (DC12V9 can be used). For locations where dust, oil mist, and direct sunlight are concerns, we offer a dustproof and waterproof resin case, both of which come with a safety breaker switch and an outlet. There is also a mounting method using magnets for easier installation. 【Features】 ■ 8 input signal points (photocoupler input) ■ 8 output signal points (open collector output) ■ 2.4GHz band spread spectrum (SS) wireless data transmission ■ No license application or qualifications required ■ Antenna can be selected according to the application *For more details, please refer to the PDF materials or feel free to contact us.

• Other network tools
• antenna
• others

At Arrow Seven, we handle wireless analog signal transmission units. The analog signal input into the "UMAI-411" is wirelessly transmitted and output as analog through the "UMAO-411," using a master setting device and a slave setting device as a set. Each operational setting is performed using the RS-232C port and the UMS setting software on a PC. 【UMAI-411 Specifications (Excerpt)】 ■ Power Supply: DC 9V to 28V or dedicated AC adapter ■ Current Consumption: 100mA or less (when using DC 12V) ■ Dimensions & Weight: 120(W) × 60(D) × 24(H) mm, 140g ■ Number of Analog Inputs: 4 points ■ Resolution: 16 bits *For more details, please refer to the PDF document or feel free to contact us.

• Other network tools
• antenna
• others

Direct wireless transmission of the analog signal from the water level sensor Analog output on the receiving side Easily build a system just by connecting to alarm monitoring devices or loggers! No wireless license required, no running costs It is also possible to use the installation station as a relay station Free rental of communication test equipment! No interference with other wireless devices due to the 920MHz band.

• Other network tools
• LAN construction and wiring work

"vibInsight" is a vibration and temperature predictive monitoring system that utilizes a wireless relay transmission system to enable data collection from a wide range. The cause of equipment and rotating machinery failures is nearly half due to bearing failures. By regularly measuring peak values and checking trends, it is possible to detect anomalies. Furthermore, with a response frequency of 20kHz, it captures signals from low to high speeds without loss and converts them into electrical signals. 【Features】 ■ Data collection from multiple buildings and multiple floors is possible with MAX10 relay stages. ■ Data can be collected beyond just bearing vibrations: - Ambient temperature - Current ■ New sensor designs can also be added. *For more details, please refer to the PDF materials or feel free to contact us.

• Other FA equipment
• Production Management System
• Other network tools

"vibInsight" is a system that detects abnormal signs in motor bearings and similar components. It monitors temperature and humidity wirelessly. Data collection is conducted using our proprietary wireless relay network system, allowing for extensive measurements and data transmission. Furthermore, it can be easily installed with wireless relays, offers flexible placement, and operates on batteries for 10 years. 【Features】 ■ Two sensors can be connected to one terminal ■ Temperature and humidity sensor terminals can also collect data on the same wireless network ■ Compatibility with various sensors such as current sensors is also possible ■ 10 years of operation on batteries (when measuring once a day) ■ A flexible wireless relay network that can cover a wide area freely *For more details, please refer to the PDF document or feel free to contact us.

• Other FA equipment
• Production Management System
• Other network tools

The monitoring system "vibInsight" from Arrow Seven conducts regular measurements of bearing [vibration and temperature anomalies], which account for about half of the causes of machine failures, using high-sensitivity sensors via battery-operated wireless devices. It detects signs of bearing anomalies quantitatively, without relying on human experience or intuition, thereby reducing downtime caused by bearing failures. Not only does it reduce manufacturing losses, but it also eliminates the need for personnel to check for anomalies, contributing to labor savings. One master unit can manage up to 100 sensors, with a wireless transmission range of 1.2 km in line of sight and over 100 meters within a factory. *With the placement of wireless relay stations, measurements can be extended over a wider area. **Features** - The vibration sensor responds up to a high frequency of 20 kHz. - Minimal effort and low cost for power and communication wiring. - The battery-operated measurement device has a battery life of about 10 years with measurements taken once a day. - Up to 10 relay devices can be connected. - The wireless frequency band is 920 MHz, with no interference from WiFi and other devices. - Raw waveform data during measurements is also collected, allowing for comparisons with past data. - FFT analysis display is possible from raw waveform data. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other FA equipment
• Production Management System
• Other network tools

The "FCall-M/FCall-A" is a terminal for calling forklifts using switches or sensors. It is possible to notify the forklift whether the operator presses the switch or the sensor detects it. The switch part is illuminated, allowing you to determine the status of the call communication based on the blinking or lighting condition. 【Features】 ■ Wireless ■ Call forklifts using switches or sensors ■ Illuminated switch part ■ Determine communication status based on blinking or lighting condition *For more details, please feel free to contact us.

• Communications
• others

The "Network Master" is a parent wireless device that can be connected to either "ETHERNET" or "RS-232C." It can be used as a wireless information collection network system. Especially in large-scale systems, by connecting the same Network Master as a relay device via LAN, data from numerous child devices installed in a wide area can be collected in a short time. 【Features】 ■ Can be connected to either "ETHERNET" or "RS-232C" ■ Used as a wireless information collection network system ■ In large-scale systems, data from numerous child devices installed in a wide area can be collected in a short time *For more details, please feel free to contact us.

• Communications
• Other electronic parts

The "UMM-2400" is a built-in antenna type 2.4GHz wireless modem with high flexibility in installation location. By integrating the radio and antenna, it is made drip-proof, and the communication cable and power supply are combined into one, making 2.4GHz communication easier to use. 【Features】 ■ High flexibility in installation location with built-in antenna ■ Integration of radio and antenna ■ Drip-proof design, with communication cable and power supply combined ■ Easier to use 2.4GHz communication *For more details, please feel free to contact us.

• Communications
• antenna

Knowing about the outdoor environment from a distance has become essential for safely monitoring people's lives. In protecting ourselves from unexpected disasters and environmental changes, sensors, wireless communication, mobile communication, and cloud systems are important keywords. Arrow Seven's technology can be of assistance in this field. 【Features】 ■ Low power consumption design possible (wireless terminal) ■ Operates on power generated from the environment (battery) ■ Wireless options available for both 2.4GHz and 920MHz bands ■ Selectable according to wireless and geographical environments ■ UMAI-411 accurately captures signals from high-resolution 16-bit sensors *For more details, please refer to the PDF document or feel free to contact us.

• Communications
• Other network tools

The "Wireless Device for AGV" supplies wireless devices for AGVs tailored to your company's specifications. We target those who want to build AGV systems in a short time, those aiming to become AGV manufacturers, and those looking to internalize AGV systems. We can also accommodate overseas requests (depending on the number of units planned). 【Features】 ■ Supplies wireless devices for AGVs tailored to your company's specifications ■ Enables the quick establishment of AGV systems ■ Targeted at those aiming to become AGV manufacturers ■ Overseas support is possible depending on the number of units planned *For more details, please feel free to contact us.

• Communications
• Other network tools

The "UMIO-88" is a 2.4GHz digital signal point transmission unit that can wirelessly transmit various I/O signals such as those from factory sites and environmental conservation signals. It enables wireless transmission of alarm signals, AGV signals, and various call signals output from on-site equipment. It can establish one-to-one transmission, one-to-N transmission, and relay transmission (up to 5 stages). Signal unit expansion is possible, and various settings can be customized. A setting software is provided free of charge. Additionally, it helps reduce wiring costs and the risk of factory downtime. 【Key Points for Choosing This Product】 ■ 2.4GHz band spread spectrum (SS) wireless data transmission ■ No license application or qualifications required ■ Antennas can be selected according to the application ■ Up to 19 sets can be used in the same area ■ Connection is easy with a screwless push-type wiring ★ A collection of materials summarizing examples of wireless relay transmission system construction is currently available! You can download it from the "PDF Download" link below.

• Other network tools
• antenna
• others

The UMAO-411 is a 2.4GHz analog signal point transmission unit that wirelessly transmits output signals. By measuring and monitoring analog signals wirelessly, it resolves issues related to location and distance. It is a low-cost, high-resolution analog 4-point output unit, with three types of antennas and an expansion-only unit available in the lineup. It supports both STD-33 and STD-66 frequency bands, and 19 channels are available for use. 【Product Lineup】 ■ Foldable antenna type "UMAO-411AB" ■ External antenna type "UMAO-411AX" ■ External wireless modem connection type "UMAO-411AM" ■ Expansion unit type "UMAO-411EX" For more details, please feel free to contact us.

• Other network tools
• antenna
• others

The "UMAI-411" is a 2.4GHz analog signal point transmission unit that wirelessly transmits input signals. By measuring and monitoring analog signals wirelessly, it resolves issues related to location and distance. It is a low-cost, high-resolution analog 4-point input unit, with three types of antennas and an expansion-only unit available in the lineup. It supports both the STD-33 and STD-66 frequency bands, and 19 channels are available for use. 【Product Lineup】 ■ Foldable antenna type "UMAI-411AB" ■ External antenna type "UMAI-411AX" ■ External wireless modem connection type "UMAI-411AM" ■ Expansion unit type "UMAI-411EX" For more details, please feel free to contact us.

• Other network tools
• antenna
• others

The "UMIO-88" is a 2.4GHz digital signal point transmission unit that wirelessly transmits I/O signals. It wirelesses the I/O signals output from on-site devices, reducing wiring costs and factory downtime risks. This new unit is equipped with 8 input and 8 output ports, offering high performance in a compact and low-cost design. We have prepared three types of antennas and a dedicated expansion unit. Additionally, it is possible to add expansion units and analog units. 【Features】 - 2.4GHz spread spectrum (SS) wireless data transmission - No license application or qualifications required - Antennas can be selected according to application - Up to 19 pairs can be used in the same area - Connection is easy with a screwless push-type wiring *The user manual is available for download. For more details, please refer to the user manual or feel free to contact us.

• Other network tools
• antenna
• others

The "UMIO-88" is an I/O transmission unit capable of wirelessly collecting signals over a wide range in various locations. Since there are no wires, failures due to disconnections do not occur, and once the wireless system starts operating, it remains stable. Additionally, there is no need for wiring work, allowing for flexible layouts, and installation or rearrangement can be done easily. 【Features】 ■ No wiring means no disconnections or similar issues ■ Stable communication with proprietary wireless technology ■ No wiring work required, flexible layout ■ Easy installation and rearrangement *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other network tools

"Factory Insight" is a production visualization system that automatically collects signals from machine tools and automated production equipment wirelessly. By grasping count signals and signals related to stoppage factors in real-time, it can lead to understanding operational rates and implementing effective stoppage measures. Additionally, by using optical sensors and current sensors, there have been cases where the operational status of production machinery, which cannot directly extract signals, has been read, making it applicable for building IoT systems. 【Features】 ■ Reduction of installation costs and time → Wireless system with minimal wiring work ■ Gradual promotion of installation work → Can be installed bit by bit ■ Reduction of relocation costs and time → Flexible rearrangement *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other FA equipment
• Other network tools

Visualize the invisible wireless! Are you struggling with wireless interference? Are you unknowingly wasting time due to interference? You can intuitively solve this with RFscope.

• Other network tools
• Other electronic measuring instruments

The "RF SCOPE" is a product that can measure wireless environments in the 2.4GHz/920MHz bands. It is a compact, handheld device that is also low-cost. It displays the wireless environment in graphs, allowing for easy checks on competition. It helps prevent decreases in operational efficiency due to interference and sudden stops, contributing to the stabilization of production equipment operation and drone flights. 【Features】 - Displays the wireless environment in graphs! Easy competition checks - Transfers measurement results to a computer via USB port for report creation - Significantly lighter and more compact than conventional products *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Other FA equipment
• Other production management systems
• Other network tools

By introducing the production visualization system "FACTORY INSIGHT" using wireless technology, a system can be established that allows for real-time collection of on-site information and communication of information to the site. This enables feedback of necessary information and sharing across various departments and positions, achieving "improved productivity" through understanding the current situation, anticipating the future, and quickly resolving issues! ■■■■ Case Study 3 of "FACTORY INSIGHT" ■■■■ <A system that achieves cost reduction through power monitoring> The pulses from power meters are collected by wireless terminals, allowing for the aggregation of power consumption at the machine and block levels. By consolidating this aggregated data to a host PC via wireless data collection terminals, it has become possible to manage the overall and individual power consumption collectively. Cost reduction is achievable without manual effort, and due to the wireless nature, the installation work can be kept to a minimum. Additionally, it is possible to sequentially grasp the consumption output while changing the locations of the wireless installations. *For more details on this case study, please download the materials from the link below.

• Other FA equipment
• Other production management systems
• Other network tools

By introducing the production visualization system "FACTORY INSIGHT" using wireless technology, a system can be established that allows for real-time collection of on-site information and communication of information to the site. This enables feedback of necessary information and sharing across various departments and positions, achieving "increased productivity" through understanding the current situation, anticipating the future, and quick problem-solving! ■■■■ Case Study 2 of "FACTORY INSIGHT" ■■■■ <NC Machine Operation Monitoring and Event Calling System> A system has been established to transmit the production status and completion signals of NC machines wirelessly to a master unit, allowing for the automatic creation of "daily and monthly work reports" on the host PC, thus reducing the burden of data aggregation. Furthermore, workers wear wristwatch-type calling devices, enabling immediate response via wireless calls from anywhere within the factory. Additionally, through cloud and mobile connections, the operational status can be checked on smartphones even while away from the site. *For more details on this case study, please download the materials from the link below.

• Other FA equipment
• Other production management systems
• Other network tools

By introducing the production visualization system "FACTORY INSIGHT" using wireless technology, a system can be established that allows for real-time collection of on-site information and communication of information to the site. This enables feedback of necessary information, sharing among various departments and positions, and achieves "improved productivity" through understanding the current situation, anticipating the future, and quick problem-solving! ■■■■ Case Study 1 of "FACTORY INSIGHT" ■■■■ <Automatic counting of production numbers in press processing and event calling system> A system was established to transmit the production status and completion signals of processing machines wirelessly to a master unit, enabling automatic creation of "daily and monthly work reports" on the host PC, thus reducing the burden of aggregation. Furthermore, since workers wear wristwatch-type calling devices, immediate responses via wireless calls are possible from anywhere within the factory. *For more details on this case study, please download the materials from the link below.

• Other FA equipment
• Other production management systems
• Other network tools

One of the important points in the factory is to collect real-time information about the on-site situation, provide necessary feedback, and share it across various departments and positions, enabling understanding of the current situation, future projections, and quick problem-solving. The production visualization system 'FACTORY INSIGHT' automatically collects signals from on-site equipment, eliminating the need for handwritten daily reports and data input tasks. Applying wireless technology for collecting on-site information and transmitting information to the site can yield significant benefits. 【Features】 ○ Automatic collection of production information via wireless ○ Graphing in Excel ○ Easy data transfer in conjunction with production management systems For more details, please contact us or download the catalog.

• Other FA equipment
• Other production management systems
• Other network tools

During forklift transportation operations, do you have any of the following concerns? - Too many unnecessary round trips - Having to go call the forklift each time - Wasting time waiting for the forklift to arrive Arrow Seven's wireless forklift calling system 'FORKS-R' enhances collaboration between drivers and workers, reducing unnecessary movements within the factory. If a worker has items they want transported, they can press a button to "call" for it, and the driver will see what needs to be transported and the destination on the terminal installed in the forklift. The system is designed to indicate whether the request has been received or completed based on the number of times the screen lights up, eliminating worries about missed transports. If you are looking to make on-site operations more efficient, please feel free to reach out to us. 【Features】 - Wireless equipment is easy to install; just need a power source - No worries about wireless communication interference with wireless LAN devices - Easy installation on forklifts, with excellent usability *For more details, please contact us or download the catalog.

• Communications

Arrow Seven is a company that coordinates total network systems centered around wireless communication. We support everything related to wireless communication, from product development to application development. Wireless systems are easily affected by environmental factors on-site, making the accumulation of experience crucial for progressing development and implementation as planned. By specializing in the development of wireless systems, Arrow Seven has gained extensive experience and reflected that technical expertise in our achievements. 【Features】 - Automatic collection of production information via wireless - Graphing with Excel - Easy data transfer in conjunction with production management systems For more details, please contact us or download the catalog.

• Communications

In-factory water level measurement, various system alarm signals, etc. A wealth of examples of cost reduction through wireless technology! You can clearly understand how alarm signals, abnormal signals, and pulse signals are transmitted wirelessly and how wireless technology is utilized. 【Case Studies】 Case 1: Alarm signals from manufacturing equipment Case 2: Water level alarm signals from pump systems Case 3: Alarm signals from hoist cranes Case 4: Lightning alarm signals from golf courses Case 5: Electric power pulse transmission Case 6: Flow rate pulse transmission Case 7: Rotary encoder pulse transmission Case 8: Hoist crane movement distance pulse transmission Case 9: Production count signal transmission Case 10: Flood alarm signal transmission *For details on each case, please download and view the catalog.

• Wireless LAN
• Other FA equipment

- Reduction of wiring costs and equipment layout change costs. - Signal transmission with rotating bodies, moving bodies, and areas where wiring is not possible. - Troubles due to disconnections are not expected. - No concerns about malfunction due to noise thanks to advanced error handling software. - Fewer cables mean fewer sources of trouble. 【Overview of Functions】 - Wireless transmission of 8 input and output contact signals. - Output format is 8-point open collector output. - Signal transmission with multiple locations is possible using 1-to-N communication. - The number of signals can be increased by adding units. - Relay transmission settings are also possible.

• Wireless LAN
• Other FA equipment
• Communications

- Reduction of wiring costs and equipment layout change costs. - Signal transmission with rotating bodies, moving bodies, and areas where wiring is not possible. - Standard equipped with 8-point contact input and 8-point open collector output signal ports. - Wireless transmission of 8 points for input and output. - Signal transmission with multiple locations is also possible using 1-to-N communication. - It is possible to connect expansion devices to increase the number of points. - Relay transmission settings are also possible. - Each setting can be easily configured on a PC.

• Wireless LAN
• Other FA equipment
• Communications