東陽機械製作所 List of Products and Services

The P-type patch (transdermal drug) cut and packaging line "MODEL P" has limitations in speed when operating in a single row, so we have achieved high-speed packaging of transdermal drugs through our unique multi-row technology (e.g., 1 row × 120 bags × 6 rows = 720 bags/min). It integrates drug manufacturing and packaging. Additionally, we have realized stable high-speed and labor-saving production from continuous cutting and bonding using die-cut rolls to continuous packaging. By checking the front and back dirt, presence of the drug, and any misalignment of the thin and lightweight workpieces, which are difficult to distinguish visually, with various image inspection devices, we have enhanced labor savings and product reliability. External appearance inspection after packaging is also possible. Defective products are identified and expelled as defective sheets at each process inspection. Good products are sent to the subsequent process for accumulation. High-speed and stable sealing is made possible by our uniquely developed validation-compliant equipment. This allows for stable filling without leaving the workpieces in a free state. For more details, please download the catalog.

• Other packaging machines
• others

The disposable heat pack packaging machine series "MODEL MW, MG, PW" is designed with a consistent system configuration from inner bag packaging to outer bag packaging, minimizing defects and requiring very few operators. Our company has a track record and know-how based on 30 years of experience in heat pack packaging, and most disposable heat packs are packaged using our machines. We offer packaging lines that can accommodate almost all types of forms, including adhesive and non-adhesive heat packs. We also have packaging machines for irregularly shaped heat packs used as thermal tools. Additionally, we have thin heating sheet manufacturing equipment, which not only supports the use in thermal tools but also contributes to product development in the cosmetics industry, such as packaging. For more details, please download the catalog.

• Other packaging machines

The TM75 (6 lanes) / TM60 (4 lanes) three-side seal packaging machine "MODEL TM75/TM60" can fill 1.6 times the volume with three-side seals and 2.5 times with sticks compared to conventional four-side seals. It features a structure that eliminates scrap, contributing to resource conservation. As it operates on an intermittent drive system, it significantly reduces product loss during stops and material changes compared to four-side seal machines. It is ideal for 24-hour operation. It is widely used for assortment packaging and has high capacity (e.g., 1 lane 60 bags × 6 lanes = 360 bags/min). Options include a small scale, auger weighing, nitrogen gas filling, film tracking correction device, printing machine, and R-cut device. This machine has a proven track record of integration with downstream processes such as counting accumulation, pillow packaging, cartoning, and bagging machines. For more details, please download the catalog.

• Sealing machine
• Other packaging machines

The liquid integrated four-side seal packaging line "MODEL MV55, MG14" is an integrated four-side seal packaging line for liquids and viscous substances (food) that has been delivered to numerous major food manufacturers both domestically and internationally. It continuously provides precise filling through each column's mono pump, and after the designated counting and integration by the MG14 type integrator, it performs secondary packaging with pillow packaging machines and others. It is suitable for packaging liquid products such as miso, condensed milk, and seaweed. With high capacity, it can produce the equivalent of several conventional machines with just one unit. Depending on the product, it can achieve a production rate of 360-720 bags per minute (60-120 bags x 6 columns). It is well-regarded not only for its space-saving and labor-saving features but also for its stable filling and sealing packaging. For more details, please download the catalog.

• Food Packaging Machinery
• Other packaging machines

The MW55 (6-row) and MW45 (4-row) multi-type filling and packaging series "MODEL MW55/MW45" has a 40-year track record as a standard packaging line for four-sided seals and has been delivered to many major food manufacturers in Japan. It can separately measure up to six types of seasoning powders and ingredients, making it suitable for packaging instant soups, ochazuke, powdered miso, furikake, and more. With high capacity, it can produce the equivalent of several conventional machines with just one unit. (Example: 1 row of 60 bags × 6 rows = 360 bags/min) It is well-regarded not only for its space-saving and labor-saving features but also for its stable filling and sealing packaging. This machine can integrate counting accumulation, pillow packaging for secondary packaging, and cartoning, and its performance has received high praise. For more details, please download the catalog.

• Food Packaging Machinery
• Other packaging machines
• Filling and bottling machines

The "MODEL MS45-ZC" four-side seal packaging machine with a multi-column auger weighing device has been developed for four-side seal inner bags. Compared to conventional horizontal inner bag packaging machines, it offers significant space savings and increased speed. It can handle a wide range of materials, from fine powders to viscous powders, which were previously considered difficult with cup-type volume measurement (such as powdered milk, coffee, cocoa, matcha, soybean flour, pharmaceuticals, health foods, etc.). The dedicated touch panel for the auger weighing machine allows for changes in filling quantity and timing simply by adjusting the auger rotation speed, enabling high-precision filling and easy operation. By linking with an optional weighing device, feedback control of the filling quantity is also possible. For more details, please download the catalog.

• Other packaging machines
• Food Packaging Machinery

The pharmaceutical high-speed filling and packaging line "MODEL SV" is a groundbreaking next-generation filling and packaging line developed by TOYO, which boasts the largest track record and experience in pharmaceutical powder packaging machines, to meet new demands. Through the development of a rotary weighing device, it has achieved a high capacity of 200 shots per minute and high-precision filling, which were unimaginable with conventional reciprocating weighing devices. To respond to the pharmaceutical industry's demands for improved efficacy and safety, a dual granule filling device has been developed, enabling high precision in the mixing ratio. It features a revolutionary design that allows for weighing and feedback control of A granules only, B granules only, and AB dual granules. For more details, please download the catalog.

• Other packaging machines

The counting, accumulation, banding, and four-side seal packaging line "MODEL MS, MG, B" is a series of packaging lines that slits products packaged by a four-side seal packaging machine into any desired bundle, sends them to a counting accumulator, and transitions them to a banding machine using a transport bucket for bundling. For more details, please download the catalog.

• Other packaging machines

The strip packaging machine "MODEL MS" is a continuous packaging machine that automatically supplies and counts tablets, capsules, and round pills while packaging them in strip bags using two sheets of packaging material from both sides. It can operate at a maximum capacity of 1600 packages per minute, and it is also possible to design a complete line from counting accumulation on a bundled sheet to bundling. It can stably package large tablets, such as denture cleaners, which are prone to breakage. For more details, please download the catalog.

• Other packaging machines

The four-sided seal packaging machine "MODEL MS series" is a vertical continuous four-sided seal packaging machine that aligns two rolls of film arranged on the left and right while performing mark alignment, measures the filling material using a weighing scale, and seals the bags. It allows for continuous high-speed operation, and due to its four-sided sealing, it is easy to integrate into secondary packaging lines such as counting and accumulation box filling. Compared to three-sided seals, it offers superior sealing protection for the filling material. Mark alignment is controlled on both sides using a photoelectric sensor. For more details, please download the catalog.

• Sealing machine
• Other packaging machines

The versatile single-lane filling stick packaging machine "MODEL TM10 MACKY" is a highly adaptable general-purpose single-lane filling stick packaging machine developed based on the technology and know-how cultivated through the production of multi-lane machines. By selecting the appropriate weighing device according to the application, it is possible to fill not only powders but also liquids and solids. Additionally, by changing the weighing device, it contributes to the production of different varieties with a single machine. The bag length can be freely set on the touch panel. The bag width can also be easily switched in a short time by simply replacing a few parts. As options, various printers, nitrogen gas filling devices, zigzag cutters, and the unique R-cut device from Toyo can also be installed. For more details, please download the catalog.

• Other packaging machines
• Food Packaging Machinery

The counting bagging and stick packaging line "MODEL TM60, TG11, F15" is designed for stick packaging of powders such as coffee mixes, sugar, health foods, and pharmaceuticals, and for bagging them in specified quantities. The two-stage sealing method prevents powder clumping and ensures strong, clean seals. The optional R-cut device rounds the corners of the sticks, creating an attractive packaging that is gentle on the hands. The bagging machine is a compact and user-friendly design with a gusseted bag filling system equipped with an accumulation device. For more details, please download the catalog.

• Other packaging machines
• Food Packaging Machinery

The counting accumulation box packing and stick packaging line "MODEL TM70, TX10" is a high-speed, slide weighing type that allows for arbitrary counting after filling and packaging, and accumulates using a servo-driven dynamic buffer, transitioning to subsequent processes such as a box packing machine that is compatible with multiple sizes. For more details, please download the catalog.

• Other packaging machines
• Food Packaging Machinery

The "MODEL TM70-ZC, TG12" stick packaging line equipped with an auger weighing machine seals and packages poorly flowing materials such as cocoa, coffee, powdered milk, and soup powder strongly and neatly without clumping. The subsequent counting and accumulation machine can be integrated with various components, including column scales (with feedback control) and elevator devices for transitioning to the next process. For more details, please download the catalog.

• Food Packaging Machinery
• Other packaging machines

The liquid and viscous product stick packaging machine "MODEL TM60-ZB, TG11" has been developed by leveraging the technology and know-how cultivated in powder packaging, resulting in a high-capacity multi-lane stick packaging machine for liquids and viscous products. It guarantees high filling accuracy and operational efficiency for a wide range of viscosities, including pharmaceuticals, yogurt, mayonnaise, and shampoo. Thanks to its unique filling mechanism, it ensures reliable liquid discharge and exceptional sealing stability. A variety of options are available, including various filling pumps, printers, film tracking correction devices, perforation cutters, zigzag cutters, clean booths, and UV sterilization devices for packaging materials. Additionally, CIP cleaning and Toyo's unique R-cut packaging can also be incorporated. For more details, please download the catalog.

• Food Packaging Machinery
• Other packaging machines

The TOYO multi-column auger weighing device-equipped stick packaging machine "TM70-ZC" is expanding its achievements thanks to its extensive know-how in weighing devices. It enables high-precision filling of fine powders and poorly flowing powders such as coffee, cocoa, matcha, powdered milk, pharmaceuticals, and health foods. With the installation of a weighing device, feedback control of the filling weight is also easy. Both the filling machine and the auger weighing machine can change operations such as bag length, filling amount, filling timing, and suction, which are pre-set in the data, simply by selecting the product type on the touch panel using servo drive. This allows for quick and easy switching of production varieties. For more details, please download the catalog.

• Food Packaging Machinery
• Other packaging machines

TOYO's stick packaging machine "MODEL TM series" has been delivered to prominent users both domestically and internationally, and its unique technology has received high praise and strong trust. As a pioneer in stick packaging, TOYO proposes optimal systems for a variety of filling materials such as sugar, sweeteners, instant coffee, coffee creamers, powdered milk, pharmaceutical granules, and oxygen absorbers, enabling significant cost reductions. The servo drive system can accommodate high-speed and diverse production, allowing for quick and easy changes to stick length, filling volume, filling timing, sealing timing, and more. The TM series can be connected to TOYO's unique counting integrators and box or bag packing machines in the subsequent processes. For more details, please download the catalog.

• Food Packaging Machinery
• Other packaging machines

In addition to various supply pumps, there are abundant options available, including printers, large diameter film unwinding devices, film edge correction devices, I-notch cutters, zigzag cutters, clean booths, and packaging UV sterilization devices. It is also possible to accommodate CIP cleaning and combine with Toyo's unique R-cut packaging.

• Filling and bottling machines

We can propose products that give consumers a friendly impression as universal design. By varying aspects such as the size of R, we can achieve a diverse range of product forms, which were previously uniform in design.

• Other packaging machines