コガネイ List of Products and Services

1. Industry's first airless. (Based on our research) 2. Energy-saving; no power supply required after locking the actuator. 3. Can be controlled with just ON and OFF, similar to a solenoid valve. 4. Using the operation checker (EAK), you can manually turn the electric compliance ON and OFF. 5. Can be directly mounted to the electric auto hand changer (EMJ). 6. Types are parallel and oscillating. Sizes are 52mm and 72mm square.

• Other FA equipment

1. Slim shape: The thickness of the main body has been made slim. This allows for a reduction in overhang, achieving a smaller robot size. 2. Standard hollow hole: The main body is equipped with a standard hollow hole in the center. Various customizations are possible, such as passing cylinder rods or air tubes through it. 3. Direct mount installation. 4. Equipped with high rigidity and high precision guides. 5. Peace of mind in case of disconnection: Built-in connectors allow for immediate resolution by replacing the relay cable (robot cable). 6. The controller supports both CC-Link remote device type and point input type, which can be selected.

• Other FA equipment

Reduction of air consumption and exhaust noise ● The ejector, pressure sensor, and vacuum pad have been integrated. This allows for a reduction in air consumption (90% reduction compared to our existing products) and a decrease in exhaust noise. Reduction of CO2 ● By reducing air consumption, customers can lower their compressor electricity costs. Compared to the suction unit VYP03 and our micro ejector ME25, an annual electricity cost reduction of 11,952 yen is possible. Lightweight design allows for installation on small robots ● The minimum type VYP03 has a body weight of 195g, making it lightweight. Additionally, the suction unit can be easily set up with just one air pipe and one power cable.

• Transport and handling robots

Electric auto hand changer for automatically converting the hands and tools of robots and automated machines. Tool changes are possible even in environments without air sources. Contributes to increased productivity. - Airless: Can be attached and detached without an air source. - Energy-saving: No power supply needed after connecting the master side and tool side. - Easy control: Can be controlled simply by ON and OFF, similar to a solenoid valve. - Slim: Minimal interference with peripheral devices due to no protruding motors. - Rich electrical interfaces: Comes with solder terminal cables, D-sub connectors, small connectors, and non-contact electrodes.

• Articulated Robot
• Transport and handling robots

1: The industry's first slim, high-precision, high-rigidity electric actuator. 2: High precision, running parallelism: 0.005mm, mounting parallelism: 0.03mm. 3: High rigidity, allowable moments: pitching: 2.1N·m, yawing: 2.5N·m, rolling: 4.3N·m. 4: Intermediate stop, speed control, and thrust setting are possible. 5: A simple operation mode with only ON and OFF is available. 6: Compatible with mini guide sliders of air actuators for mounting. 7: The main unit is available in "high torque type" and "high-speed type." 8: Features for foreign object prevention, stroke adjustment mechanism, and various variations of vertical brackets are available.

• Transport and handling robots

1: Small high-flow valve for medical analysis. 2: PVR16: Orifice Φ1.6 and PVR20: Orifice Φ2 are available in the lineup. 3: Minimization of internal volume through optimization of internal flow paths. 4: Adoption of a rocker type minimizes changes in internal volume. 5: Metal-free wetted parts improve corrosion resistance. 6: Standard equipped with a power-saving circuit for low power consumption. 7: Achieves a lifespan of 10 million cycles (based on our testing conditions).

• Pneumatic Equipment

■Contributes to miniaturization and weight reduction of devices ■Optimal for control in micro flow ranges ■Can be used with liquids ■Available in direct piping type and bottom piping type ■Includes formats compliant with ISO 10993 biological safety evaluation ■CE compliant

• Other FA equipment
• Other physicochemical equipment

This catalog is a comprehensive introduction to the ionizers for static electricity removal handled by Koganei. With excellent ion balance from the high-frequency AC method and a variety of nozzles, it features the "Blow Type Ionizer," which enables static elimination from pinpoint to wide work areas, as well as the "Air Gun Type Ionizer" and "Static Electric Potential Sensor," among others. Please use this for selecting products. [Featured Products (Excerpt)] ■ Blow Type Ionizer ■ Hyper Ionizer ■ Bar Type Ionizer ■ Fan Type Ionizer ■ Air Gun Type Ionizer *For more details, please refer to the PDF document or feel free to contact us.

• Static electricity eliminator
• Ionizers and static eliminators

Conventional quick-connect speed controllers adjusted the actuator's speed by rotating a needle and then securing it with a lock nut, making it impossible to determine the set value from the outside. The new product now features markings every 0.5 rotations, allowing for verification. This significantly reduces the labor required for flow rate setting tasks.

• Pneumatic Equipment

When transporting a workpiece, it is gripped with an air hand, moved, and placed at a designated location in a series of movements. When placing it at the designated location, a method is used to insert the protrusion of the workpiece into the recess. Until now, a compliance light for the equipment that had been commercialized could be used, but we have now released equipment that eliminates rotation in the theta direction. 1. We do not want to rotate in the theta direction when inserting directional components. 2. After inserting directional components, we want to rotate them at a specific angle with a certain moment. Such usage is possible.

• Pneumatic Equipment

1. Single and double-use valve 2. Adopts a joint for different diameter sizes 3. Possible to rearrange base piping and direct piping 4. New easy-build type manifold added (F10, F15) 5. Intermediate piping block can be selected at the time of order (F10, F15 easy-build type manifold) 6. Tandem 3-port valve (4 positions) available 7. A simplified wiring type is available for integrated manifolds (F10, F15) 8. Stop valve included (optional) (F10, F15 integrated manifold, easy-build type manifold) 9. Back pressure prevention valve (optional) (F10, F15)

• Other semiconductors
• Other electronic parts
• Other Auto Parts

The contents that were previously executed using the teaching box and serial communication can now be controlled solely with CC-Link. ● "Direct value setting" and "Direct value operation" ● "Data setting" for point data and parameter data ● "Data acquisition" for point data and parameter data ● "Data management" for currently occurring alarms and current positions, etc.

• Other electronic parts

An electric pump designed for slit coaters used for substrates in applications such as liquid crystals, PDP, and organic EL, where uniform thin film coating is required. The structure of the high-viscosity discharge and highly reliable CT pump has been further evolved to enable constant flow rate control. We have a proven track record for high viscosity of over 10,000 cp. Maximum discharge volumes are available in 30ml, 60ml, 100ml, 200ml, and 300ml, with pump sizes tailored to the customer's substrate size and application.

• Other semiconductor manufacturing equipment

The desktop-type compressor features a compact design with a footprint of A4 size (210mm x 297mm). It has a quiet design with noise levels below 55 decibels. This small compressor weighs only 4.6 kg. Additionally, it is environmentally friendly and complies with the RoHS directive.

• Other pumps

A uniquely designed rotation-less cylinder that compactly integrates two cylinders. Significantly reduces design costs and the number of parts for non-rotating devices.

• cylinder
• Pneumatic Equipment

A compact air pressure cylinder.

• cylinder
• Pneumatic Equipment

A rich series configuration and mounting types compliant with ISO standards, medium-sized tie rod cylinders. A wide variety of cylinder diameters from 32 to 125 mm, ranging from non-rotating to those with brakes.

• cylinder
• Pneumatic Equipment

Linear stepping actuator IB-Move main unit High-speed positioning for lightweight work, frequent setup changes for pressing and extrusion tasks. Ideal for processes that require high frequency and long lifespan.

• Assembly robot

- Industry first! New solenoid technology adopted (patent pending).

• Hydraulic Equipment
• Filling and bottling machines
• Food Conveyor Equipment

We have newly developed a high-precision proportional control valve that is optimal for production lines and plants involving air, gas, and liquids. It enables stepless control necessary for flow management of gases and liquids. The standard input signals can be selected from 4-20mA or 0-10V. The controller is equipped with an initial setting support circuit that allows for initial configuration without external input.

• Other physicochemical equipment
• valve
• Other FA equipment

The world's smallest, innovative, guide-integrated cylinder has a new variation. The mini guide slider is an actuator that integrates the guide and cylinder, differing from conventional guide-equipped cylinders.

• Assembly Machine
• Pneumatic Equipment

No guide is needed with two rods. Moreover, linear ball bearings are used in the bearing section, ensuring high non-rotation accuracy and tip deflection accuracy even during full stroke. It achieves double the thrust of conventional cylinders and high space efficiency, demonstrating its effectiveness in miniaturizing machinery with a flat, square body.

• cylinder
• Pneumatic Equipment

This is a cylinder equipped with an easily handled small 4mm square sensor switch. It also offers a rich variety of non-rotation types, responding to diverse needs with high non-rotation accuracy. The compact body and mounting brackets enable versatile installation.

• cylinder
• Pneumatic Equipment

The high quality and high reliability design using stainless steel tubes is the standard for small and medium-sized cylinders.

• cylinder
• Pneumatic Equipment

This cylinder is ideal for the stopper and lifter of the conveying line. It features two types of guide rod bearings: sliding bearings and rolling bearings, to accommodate various applications.

• cylinder
• Pneumatic Equipment

This is an optimal valve unit for controlling a suction transport system using a vacuum pump. In the transport system, it can quickly attach and detach small workpieces with suction pads, leading to a higher takt time for the system.

• Vacuum Equipment