シンクレア・アンド・ラッシュ List of Products and Services

This type has a ring on the outer circumference of the standard tapered plug cap, making it significantly easier to remove the plug. It is available based on NPT sizes. - Size range: from NPT 1/8 to NPT 2” - Some items available for immediate delivery from Japanese stock - Color: blue - Material: LDPE

• others

This is a plug with a handle attached to a tapered silicone shape. It is a product that offers good workability for attachment and detachment. The shape is specially designed for powder coating and "E" coating finishing systems, allowing it to be safely used at extremely high temperatures of up to 232°C. ● It is reusable. The number of uses varies depending on the temperature of use. ● It is color-coded by size, making it easy to distinguish. ● It does not harden or crack.

• Other painting machines

We offer 4,000 types of caps as standard products.

• Other machine elements

The P series with pull tabs, the Y series with tear tabs, and various pipe inserts are all standard products, but we have prepared a wide variety of shapes and sizes. Their lightweight nature is the biggest feature, making them particularly advantageous for large products and contributing to reduced transportation costs. ● In addition to the conventional tapered plugs, we have significantly expanded our product lineup. Although polyethylene products lack elasticity, we have prepared various shapes to ensure adequate compatibility.

• Other machine elements

We simplify the labor-intensive masking process, which not only increases painting productivity but also allows materials such as silicone (for high temperatures) and EPDM (for chemical resistance) to be used for various applications. Additionally, we offer tapes and discs that are widely used on many job sites. ● In addition to conventional products, we have washer plugs that can seal three different diameters with one piece. We also provide a wide range of special shapes, including pull plugs that are ideal for parallel threads.

• Other machine elements

A double dip grip that has strength on the inside and a soft cushioning on the outside. A Softex grip with an anti-slip finish. A suede grip that combines the appearance and feel of suede on the grip surface. We offer a variety of grips that utilize molding techniques. Please try out the new image and design created by our grips. ● Molds have been created for both inch and millimeter diameters, and 22 sizes are now produced domestically. We can accommodate short lead times and small lot sizes with three types of grips: long, Softex, and suede.

• Other machine elements

Highly flexible, quickly installable, and provides excellent fit. No cracks or fissures occur in any application. It excels in insulation, weather resistance, moisture resistance, and chemical resistance. ● We offer a wide range of standard sizes. Additionally, we can accommodate production using our existing molds for changes in internal length, color, material (hardness, UL compliance, etc.), and thickness adjustments.

• Other machine elements

By adding a knob, it becomes easy to remove and allows for efficient work progress. It has excellent adhesion and is ideal for paint masking. ● Recommended for sites that prioritize work efficiency. ● Heat-resistant specifications are also available.

• Other machine elements

Supports PT1/8 to 1 inch.

• Other machine elements

- The sizes range from PT1/8 to PT1 inch. - The material is flexible and stretchable PVC, which is expected to improve work efficiency compared to harder materials like polyethylene. It can be used outdoors without cracking, allowing for long-term use. - The 360-degree pull tab enhances ease of attachment and detachment.

• Other machine elements

We have addressed the shortcomings of our conventional products, which are prone to deterioration outdoors and have a high protrusion. The basic colors are black, beige, and gray, but color specifications are also possible. ● Excellent weather resistance; no cracking or chipping occurs. Suitable for cold regions as well.

• Other machine elements

Sizes available are for M8, M10, M12, M16, and M20. Designed to match JIS sizes, it can be easily installed with a one-touch mechanism. The material used is soft PVC, which has elasticity. No adhesive is required in particular. ● By utilizing the properties of the material, it provides sufficient rust prevention and insulation effects. ● The height of the nut section can be easily adjusted and is compatible with double nuts as well.

• Other machine elements

Made of flexible PVC, it can be quickly installed and also has excellent insulation properties. A variety of sizes and colors are available. ● There are two types of closed ends: round end and flat end. ● You can choose either soft or hard material. ● Heat-resistant specifications are also available.

• Other machine elements

The flange cover made of flexible PVC protects the surface of the flange and prevents internal damage and dust contamination. It is also suitable for protecting flared or bead-processed tubes, pipes, and ducts. ● The snap ring design allows for easy attachment and detachment. ● It will not crack, tear, or warp. ● The cover can be reused multiple times.

• Other machine elements

This uniquely designed flange cover made from flexible PVC protects products from surface friction and dust. It also complies with JIS standards. Additionally, it can be removed more easily than masking tape, plywood, or vinyl sheets. ● No distortion, expansion, or cracks. ● Durable against weather, humidity, oxidation, oil, and friction. ● Easy to identify due to its yellow color.

• Other machine elements

FC flange cover designed for thin flange covers. Extremely easy to snap on and off. Can also be used with edged pipes and tubes. ● Fits most thin flanges. ● Durable and sufficiently moisture-resistant. ● Made of soft PVC, it does not crack or tear and is highly weather-resistant. Reusable as well.

• Other machine elements

This is the ideal product for protecting tube ends, threads, and ports during shipping and storage. Its tapered design makes it easy to insert and prevents it from falling out. ● Can be used as a cap or plug. ● We stock many sizes for immediate delivery.

• Other machine elements

It is made of flexible PVC or NBR rubber, making it ideal for masking. If air-dried at room temperature, PVC can be sufficiently used. For those who prefer a straight (cylindrical) outer diameter rather than a tapered one. ● Size options: Outer diameter from 11.0 to 47.0, 30 varieties ● Color: Black ● Material: PVC or NBR

• Other machine elements

It is designed to be inserted with one push into screw holes of specific sizes. The shape is slightly thicker rather than tapered, so there is some resistance during insertion, but it offers better sealing than tapered plugs. It is based on metric screws. There is a wide range of hole diameters available. ● There are 25 types of sizes, with hole diameters ranging from 6.6 to 33.0. ● Most are available for immediate delivery from stock in Japan. ● The color is milky white, and the material is LDPE.

• Other machine elements

It is designed to be inserted with one push into screw holes of specific sizes. It is easier than screw plugs but provides sufficient sealing. It is based on inch screws, but we also have options that can be applied to M screw sizes. ● Size types: 13 types from M6, 1/4 inch to M27, 1-1/16 inch ● Color is yellow, material is LDPE.

• Other machine elements

We designed a pull tab for the standard tapered plug cap. Removing the plug has become significantly easier. While it is based on NPT sizes, we also have options available for PT sizes. ● Size varieties: From PT 1/8 to PT 2”, a total of 12 types ● Some items are available for immediate delivery from stock in Japan. ● Color is blue, and the material is LDPE.

• Other machine elements

The simply designed straight caps do not have any screws or tabs, but as a result, we offer a wide variety of sizes at a low cost. Please consider them as an alternative to PVC caps. ● Size varieties: 37 types from 1/8 (3.18) to 3-1/2 (88.9) ● Available for immediate delivery from stock in Japan ● Color: blue, Material: LDPE

• Other machine elements

Originally designed for connector covers of consumer electronics, it is widely used for general purposes due to the ease of pulling out the flange part (the lip at the back of the opening). ● Size types: 10 types for inch screws and M screws ● Color: red, Material: LDPE

• Other machine elements

It has a tear that allows for easy removal. (Reusing the cap is not allowed.) It also has ribs on the inside, making it suitable for products with screws. ● Size options: 9 types from 1/8” NPT to 2” PT/PF ● Color is blue, material is LDPE

• Other machine elements

Reinforced with two ribs on the inside of the cap to compensate for the material weakness of polyethylene, which lacks rubber elasticity. Available in 10 sizes: 25A, 32A, 40A, 50A, 65A, 80A, 100A, 125A, 150A, plus a new CEX with an inner diameter of φ73.00. ● Sold in small bags (units of 25 to 250) to meet small-volume demand.

• Other machine elements

It is attached to a standard hex bolt and nut to create a state similar to a cap nut. It is used for PL measures, injury prevention, and cosmetic purposes. It is designed to fit JIS sizes. ● Size types: 11 types from M5 to M24 ● M6-M12 are available for immediate delivery from stock in Japan. ● Color is white, and the material is LDPE.

• Other machine elements

It is compatible with UNF and UNJ screws for aerospace and other equipment. The outer side of the plug is also threaded, allowing for a tight seal. The knob on the top of the plug is designed for easy gripping. ● Size types: 11 types from 5/16-24 SAE to 1-5/16-12 SAE ● Color is red, material is LDPE.

• Other machine elements

It is compatible with UNF and UNJ screws for aerospace and space equipment. The inside of the cap is also threaded, allowing for a tight seal. The ribs on the entire outer surface of the cap are designed for easy gripping. ● Size types: 7 types from 3/8-24 SAE to 1-1/16-12 SAE ● Color is blue, material is LDPE.

• Other machine elements

It has excellent chemical resistance and can withstand temperatures up to 177°C. It can be used repeatedly for masking and finishing. ● It can withstand the most severe chemicals used in the plating process, making it ideal for plating. ● Custom sizes are also available.

• Other machine elements

It has excellent chemical resistance. Although it is not as good as silicone, it can also withstand high temperatures and can be reused for masking and finishing. - Ideal for painting and coating. - The V-shaped design allows one plug to fit several types of ports. - Sizes that are usually hard to obtain are also available.

• Other machine elements

The hollow part has elasticity and fits diameters that conventional ones of the same size could not accommodate. Additionally, since the material does not cover the hollow section, the price is lower than that of conventional plugs.

• Other machine elements

It can be safely used at extremely high temperatures of up to 232°C, with a shape specifically designed for powder coating and "E" coating finishing systems. ● It is reusable. The number of uses varies depending on the usage temperature. ● There is no bleeding of coloring agents at high temperatures. ● It does not harden or crack.

• Other machine elements

The tapered shape is designed to fit multiple ports with one size. It features a specially designed shape for powder coating and "E" coating finishing systems, allowing for safe use at extremely high temperatures of up to 232°C. ● It is reusable. The number of uses varies depending on the temperature of use. ● There is no bleeding of coloring agents at high temperatures. ● It does not harden or crack.

• Other machine elements

The hollow part provides elasticity and fits diameters that conventional plugs of the same size could not accommodate. Additionally, because the material does not cover the hollow section, the price is lower than that of conventional plugs.

• others
• Other machine elements

Having two types of plugs in one allows for a reduction in material and transportation costs.

• Other machine elements

The pull tab designed with a diameter smaller than the masking diameter makes attachment and detachment easy. While the main plug designed with a diameter larger than the masking diameter is compressed, sufficient sealing can be achieved.

• Other machine elements

The flat silicone cap "FSC series" has a flat opening compared to the conventional round type, allowing for stable positioning during masking.

• Other consumables

◆Paint Discs (Color: Cream) The crepe paper discs can withstand drying temperatures of up to 149°C for 1 hour. They are flexible and adhere perfectly, allowing for clean edges that can be easily removed. ◆Powder Coating Discs (Color: Green) The polyester discs can withstand temperatures of about 218°C for approximately 1 hour. These discs are particularly thick and can be easily removed from most surfaces. They can also be used for electrocoating (E-coating) and plating. ● Excellent pressure and heat resistance. ● Easy to remove, guaranteeing clean removal marks.

• Other machine elements

It is of course ideal as a grip, as well as for protecting pipes and covering cable terminals. It is also used for masking, taking advantage of its durability. ● Available in inner diameters from 6.35mm to 50.0mm, with an inner length (length to the bottom) of up to 279.40mm. ● You can also choose the color. ● Made to order in lots of 50-100 pieces.

• Other machine elements

It can be used for a wide range of applications, not only as a handle or grip but also as covers for levers and gears, and at the ends of cables. ● There are two types: round end and flat end. ● You can also choose the color. ● Made in the USA (with some production starting in Japan).

• Other machine elements

This is a foam grip made by extrusion molding. You can choose between a surface finish that has been ground and one that retains a glossy finish. ● The material is a foam type of NPVC. ● FHG-22 (for Φ19.05) is in stock, and free samples are available.

• Other machine elements

There is no need to forcibly design the outer anti-slip grooves in injection molding. It has a thick finish, providing not only durability but also a comfortable grip. ● Excellent durability. ● It has an anti-slip treatment, making it ideal for tools and health equipment. ● It can be used from existing molds, and you can choose the color as well.

• Other machine elements

The double-dip grip with a double-layer structure has two main features. The first is that the inner liner is reinforced for strength, while the outer grip has a soft cushioning effect. The second feature allows for a unique combination by using different colors for the liner and the grip, which can enhance the design of your products. ● Being a two-layer structure made of durable PVC, it allows for reinforcement of the liner, making it all-weather resistant and durable. ● It can be adjusted in terms of material, color, and length, excelling in both practicality and design.

• Other machine elements

Originally designed for connector covers of consumer electronics, it is widely used for general purposes due to the ease of pulling out the flange part (the lip on the back of the opening).

• others

The simply designed straight cap does not have any screws or tabs processed, but as a result, we offer a wide variety of sizes at a low cost. Please consider it as an alternative to PVC caps.

• others