ｉＮＤ List of Products and Services

By connecting multi-vendor Modbus RTU compatible devices, it supports a variety of interfaces such as contact input/output, analog, and pulse, enabling data collection and monitoring of water levels, current, temperature, power consumption, etc., as well as alarms and equipment control. This device is equipped with intelligent features such as data processing and event detection functions, allowing for flexible customization according to customer needs. For example, it can minimize data volume and save communication costs by sending event notifications to the server during state changes like alarm occurrences and recoveries, or it can perform data processing on the server for more detailed monitoring. Additionally, by integrating with "Facility Assist," it becomes easier to achieve equipment management, visualization of conditions, and remote control.

• Power Monitoring Equipment
• Demand Monitoring
• Other network tools

"Comm Assist-Mod" is a protocol converter that connects RS-232C devices or RS-485 devices to Ethernet. It allows you to select the communication method from multiple communication modes according to the connected devices. In Modbus/TCP mode, by connecting RS-485 devices that support Modbus RTU/ASCII transmission methods, it sends (requests) Modbus/TCP data from a PC or PLC on Ethernet to RS-485 Modbus RTU/ASCII devices as Modbus RTU/ASCII data, and conversely, it sends (responds) Modbus RTU/ASCII data from RS-485 Modbus RTU/ASCII devices to a PC or PLC on Ethernet as Modbus/TCP data. Additionally, it has RS-232C/Ethernet converter and RS-485/Ethernet converter functions.

• Other network tools
• Other security and surveillance systems
• Demand Monitoring

"ECOGate-WS" is a controller for low-voltage smart electric power meters. It has the capability to acquire electric power data via the "B route" communication method using Wi-SUN communication equipped in low-voltage smart electric power meters. It has a Modbus-TCP server function, allowing the acquired various electric power data to be retrieved using the Modbus-TCP protocol.

• Other energy equipment
• Demand Monitoring
• Power Monitoring Equipment

■Purpose of the System "PVWatcher" is a system that collects various data such as power generation amount, temperature, and solar radiation from ECom-PV or ECom-PVM located remotely, and transmits this data to a central server via the internet or a closed network. We will provide proposals that maximize benefits according to your budget and requirements, including not only data collection from the power conditioner and the construction of the central server but also the ability to view the acquired data on the web or signage applications, as well as alarm notifications via email. ■System Configuration An energy data collection device that collects data from the power conditioner and sends it to the central server. A central server that stores the data. "Visualization" through web and signage applications. "Centralized management" through maintenance/monitoring systems. Additionally, it consists of mobile routers, broadband routers, etc., for data transmission.

• Remote Control
• Power Monitoring Equipment
• Demand Monitoring

By collecting the operational status data of equipment monitored at each site using dedicated data collection devices for sensors, measuring instruments, and contact monitoring devices, and converting it on the cloud into user-friendly communication protocols and data formats, it becomes easier to create application software tailored to the needs of each user.

• Remote Control
• Other security and surveillance systems
• Other process controls

Digital information such as electricity usage from high-voltage smart meters used in factories and large-scale facilities is collected in real-time via Route B and sent to a cloud server. By utilizing application software on the server side, we will build an energy management system that visualizes electricity consumption and monitors demand. Overview and Features: ■ Collects electricity data and utilizes it on a cloud IoT platform ■ Supports data collection from high-voltage smart meters compliant with the ECHONET Lite standard ■ Achieves high security and easy integration with the IoT platform by using monitoring and control protocols

• Power Monitoring Equipment
• Demand Monitoring
• Other energy equipment

"iND MIST2" is a service that converts data from terminal devices such as RS-232C equipment into TCP/IP using our LTE-compatible communication terminal, and sends it to our data center, from where it is sent via email to a dedicated email address for the terminal. By connecting our "iND MIST2 compatible products" to RS-232C equipment, customers can receive data from RS-232C devices as emails on mobile devices such as mobile phones and smartphones, or on email software on their office computers.

• Other network tools
• Other security
• Other security and surveillance systems

The "F2L Assist-SS-A" is an LTE-compatible adapter equipped with an RS-232C controller that incorporates NTT Docomo's LTE communication module UM05-SS. Since it can be used with a flat-rate plan, you can use it for a fixed monthly fee. It features RS-232C protocol conversion capabilities, allowing for a wide range of applications such as switching from FOMA/PHS to LTE.

• Other network tools
• Routers, Switches, and Hubs
• Demand Monitoring

The "LMG-300" can obtain interface information such as contact inputs, analog signals, and pulses from PLC devices by connecting to them via Ethernet, as well as monitoring control equipment and alarm information. The collected data can be transferred to cloud service databases like AWS IoT using the MQTT protocol (in JSON format), allowing for flexible customization according to customer needs, such as performing data processing on a server. Additionally, by integrating with "Facility Assist," it becomes easier to achieve management of equipment and visualization of its status. The "LMG-300" is equipped with multi-carrier LTE communication capabilities, allowing users to utilize services from various domestic carriers (NTT Docomo, KDDI, SoftBank, MVNO). Therefore, by simply connecting the PLC device to a LAN, it can immediately connect to the internet and store data in a cloud database. Communication is secured through authentication and encryption via SSL.

• Other network tools
• Other energy equipment
• Data Logger

The "LXG-600" is an EMS controller for high-voltage smart meters. It has the capability to acquire power consumption data using the IPv6-based "B route" information communication method equipped in high-voltage smart meters. It converts the acquired data in ECHONET Lite format to the cloud server's receiving protocol/data format and has the functionality to regularly transmit this data via the LTE wireless communication carrier network. The transmission method to the cloud server can also be customized according to the customer's needs. Main Features: ■ EMS controller compatible with high-voltage smart power meters (B route) ■ Compliant with ECHONET Lite standard and ECHONET Lite AIF standard ■ Data transmission of various measurement values from high-voltage smart power meters via LTE

• Other energy equipment
• Demand Monitoring
• Data Logger

The L2X Assist-RS-E is a FOMA to LTE migration adapter that incorporates the UM04-KO LTE communication module manufactured by NTT Docomo. It allows for an easy transition to LTE simply by replacing the currently used FOMA adapter set connected to your equipment/devices. Since it can be used with a flat-rate plan, you can utilize it for a fixed monthly fee. Additionally, it supports multi-communication and can connect to multiple APNs (up to 2 locations). For incoming calls, it can receive notifications and connections from multiple APNs (up to 2 locations).

• Routers, Switches, and Hubs

L2X Assist-RS-A is a high-speed mobile router that incorporates NTT Docomo's LTE communication module UM04-KO. It can be used with a flat-rate plan, allowing for a fixed monthly fee. In addition to standard router functions, it is equipped with RS-232C protocol conversion capabilities, making it suitable for a wide range of applications, such as switching from FOMA/PHS to LTE.

• Routers, Switches, and Hubs

This system is an IoT gateway device that retrieves data from child devices installed within a PAN via LoRa private wireless communication (920MHz communication) from a master unit and sends that data to the cloud using an LTE-compatible communication module. This allows for monitoring of the information from devices such as computers, enabling quick implementation of appropriate measures in the event of device status abnormalities.

• Routers, Switches, and Hubs
• Communications
• Power Monitoring Equipment

The "IP3-LP8-2" device has 8 contact inputs and 2 contact outputs, and when used with the dedicated adapter set UM04-KO, it enables the monitoring and control of equipment and devices with contacts over LTE. It contributes to early fault detection and addressing personnel shortages. ■ Contact Input/Output It has 8 contact inputs that report state changes and allow remote monitoring. New settings have been added for reporting contact changes and determining the ON/OFF judgment time, enabling various input judgments. It has 2 contact outputs that allow for remote control and state acquisition. ■ Support for both Socket Communication and Email Communication In the case of socket communication, it can perform contact input notifications, control contact outputs, check contact input states via polling, and notify of power outages/restorations. In the case of email communication, it can perform contact input notifications, regular notifications, and notify of power outages/restorations. ■ Contact Monitoring and Output Control Function During Power Outages Even during a power outage, contact monitoring and contact output control can be performed.

• Other network tools
• Other security and surveillance systems
• Demand Monitoring

The "IP3-LP4" is a device that has 4 contact inputs and 1 contact output, and when used with the dedicated adapter set UM04-KO, it enables the monitoring and control of equipment and devices with contacts over LTE. It contributes to the early detection of faults and addresses personnel shortages. ■ Contact Input/Output It has 4 contact inputs that accumulate the ON time and count of each contact. Additionally, it has 1 contact output that can be controlled by commands from the center. ■ Supports both Center Communication and Email Communication In the case of center communication, it can notify contact input, control contact output, check contact input status through polling, and notify of power outages/restorations. ■ Reliable Email Sending When sending emails from the IP3-LP4, it will repeatedly resend until a reply email is received, ensuring that the responsible person reliably receives the information generated. ■ Selection of Email Sending Information You can choose whether to send or not send each piece of information, such as contact input data and power outage/restoration notifications, for each email recipient. *For more details, please feel free to contact us.

• Other network tools
• Other security and surveillance systems
• Demand Monitoring

"Facility Assist for SaaS" is a service that provides "Facility Assist," a system that monitors the condition and stable operation of equipment and machinery, as a SaaS offering. Customers can view the data collected by each monitoring device using a web browser. The packaged version had high development and operational costs due to initial expenses, operational management after implementation, and data backup, but the SaaS version is available for a monthly fee, and since system management is handled by our company, it allows for easy initiation of equipment monitoring and enables early implementation. By utilizing various APIs from the cloud infrastructure, data integration with the customer's business systems is also possible. ■Supported models → LMG-300, IOG-100

• Communications
• Power Monitoring Equipment
• Other security and surveillance systems

The "HL320-DLS" is an M2M/IoT router compatible with in-vehicle power supply, equipped with an LTE communication module. It allows for high-security data communication through VPN functionality using high-speed communication networks provided by mobile carriers. It is designed to operate under harsh conditions and can utilize data communication services offered by mobile carriers for data collection from outdoor devices such as parking payment machines, EMS (solar, wind) data collection, and data collection from export equipment.

• Routers, Switches, and Hubs

The "LM-200" is an IoT/M2M router equipped with multi-carrier LTE-compatible RS-232C protocol conversion functionality. It can be used with services from various domestic telecommunications carriers (NTT Docomo, KDDI, SoftBank, MVNO). In addition to standard router functions, it features RS-232C protocol conversion, allowing for a wide range of applications such as switching from FOMA/PHS to LTE. Furthermore, it can be utilized for data collection from outdoor devices that require strict environmental performance, such as parking payment machines, as well as for data collection in EMS (solar power, wind power) and for export devices.

• Routers, Switches, and Hubs

"Facility Assist" is a facility monitoring system that packages the necessary functions for the stable operation and visualization of equipment and machinery, and is compatible with the cloud. In addition to the ease of system construction provided by cloud technology, using the packaged applications allows for simplified remote maintenance, addressing personnel shortages, early prediction of failures, and reduced recovery time, among many other benefits. We also offer customization based on customer requests, providing suitable proposals each time. ■ Supported Products ⇒ IOG-100, LM-100, L2X Assist *For detailed equipment configuration diagrams, please download the PDF materials.

• Power Monitoring Equipment
• Other security and surveillance systems
• Remote Control

The "IOG-100" is an IoT gateway device equipped with the MQTT protocol and compatible with our IoT platform "Facility Assist." By connecting the OP485 series, it supports a variety of interfaces such as contact input/output, analog, and pulse, allowing for monitoring of water levels, current, temperature, power consumption, etc., as well as alarms and equipment control. This device is equipped with intelligent features such as data processing and event detection functions, enabling flexible customization according to customer needs. It can minimize data volume and save communication costs by sending event notifications to the server during state changes like alarm occurrence and recovery, or it can perform data processing on the server for more detailed monitoring. Additionally, by utilizing the MQTTS protocol (publisher/subscriber functionality), it is also easy to integrate data with other IoT platforms that have MQTT (broker functionality).

• Power Monitoring Equipment
• Demand Monitoring
• Other network tools

This device is a gateway device for home installation targeting the HEMS market. It supports the communication standards of HEMS, namely ECHONET Lite and UPnP, and detects home appliances compliant with the ECHONET Lite standard to generate virtual devices compliant with the UPnP standard for network provision. In October 2013, it obtained ECHONET Lite certification (Certification Number: GZ-000078). It also allows for monitoring and control of home appliance status from computers within the network based on the UPnP protocol, as well as B-route communication with low/high voltage smart electric meters, enabling us to provide solutions tailored to your needs.

• Other network tools
• Other energy equipment

1. Automatic Calling (Always Connected) After the device is powered on, it automatically initiates calls to the LTE network and performs PPP authentication. 2. Command Response After the device is powered on, it automatically initiates calls to the LTE network and performs PPP authentication. 3. Protocol Conversion and Session Control Data received from the terminal device is sent to the center with TCP/IP and UDP/IP headers added, and data received from the center has the TCP/IP and UDP/IP headers removed, sending only the data to the terminal device without any procedures. 4. Message Sending In the event of occurrences such as HLT-RS3A reboot, communication path establishment, or line connection failure, these events can be notified to the terminal device. 5. Variable Power Supply and Power Control It is equipped with a power supply that accepts an input voltage of DC 9 to 32V. 6. Version Upgrade The internal program of the HLT-RS3A can be easily rewritten using a dedicated tool. 7. Connection to LTE Communication Equipment It connects to the dedicated adapter set for the LTE ubiquitous module. *For details, please contact us.*

• Other network tools
• Other security and surveillance systems

The "L2X Assist" is a high-speed mobile router equipped with the LTE ubiquitous module "UM04-KO." As a successor to our high-speed mobile routers that have built a strong track record in the M2M field, it has transitioned from traditional 3G communication to high-speed LTE communication. Additionally, it incorporates the latest features such as multi-communication, achieving miniaturization, weight reduction, and further cost reduction. Multi-communication allows simultaneous connections to two different APNs with a single UIM card, expanding various applications. Since it supports flat-rate plans, it can also be used for large data transfers such as images and videos at a fixed monthly fee. This device can be utilized for data collection in outdoor equipment that requires stringent environmental performance, such as parking payment machines, data collection for EMS (solar and wind power), and data collection for export equipment.

• Other network tools
• Routers, Switches, and Hubs
• Demand Monitoring

The "LM-100" is an IoT/M2M router equipped with a communication module that supports 3G/LTE, enabling faster communication. It features automatic recovery functions such as heartbeat monitoring and scheduled reboot capabilities, and it is compatible with major overseas cloud service IoT platforms. By subscribing to the relevant services, users can check the status information of this device (such as transmitted and received byte counts, LTE signal levels, communication latency, router operation logs, etc.) on the cloud. This allows for easy remote maintenance, and by visualizing the data in graph form, users can intuitively grasp the situation. This device can be used for data collection in outdoor equipment that requires strict environmental durability, such as parking payment machines, data collection for EMS (solar and wind power), and data collection for export equipment.

• Routers, Switches, and Hubs
• Communications

The "IP3-K5D" has 8 contact inputs and 2 contact outputs, and when used with the dedicated adapter set for the FOMA ubiquitous module, it enables contact monitoring and control on the FOMA network. It is a recommended replacement for the Omron Corporation's "Model K5D," allowing customers already using Model K5D to utilize this device without changing their operating environment (with some exceptions for certain functions). ■ Successor Model of 'IP3-K5D' The functions of the conventional model are maintained, and the communication format is the same, so no changes are necessary on the center side. The mounting pitch is the same as that of 'IP3-K5D,' making replacement easy. ■ Contact Input/Output It has 8 contact inputs for monitoring and reporting. New settings have been added for reporting the presence or absence of contact changes and for determining the ON/OFF judgment time, allowing for diverse input judgments. It has 2 contact outputs for remote control and alarm output. ■ ALLwatch Communication and Email Reporting Like the 'IP3-K5D,' it can perform ALLwatch communication and email reporting.

• Other network tools
• Other security and surveillance systems
• Demand Monitoring

"PVWatcher" is a system that collects various data such as power generation amounts, temperature, and solar radiation from ECom-PV or ECom-PVM located remotely, and transmits this data to a central server via the internet or a closed network. We will provide proposals that maximize benefits according to your budget and requirements, covering not only data collection from the power conditioner and the construction of the central server but also the overall system configuration, including viewing the acquired data on the web or signage applications and sending alarm notifications via email.

• Power Monitoring Equipment
• Other energy equipment
• Demand Monitoring

The "IP3-FP8-2" has 8 contact inputs and 2 contact outputs, and when used with the FOMA ubiquitous module dedicated adapter set, it enables the monitoring and control of equipment and devices with contacts on the FOMA network. It contributes to early detection of failures and addressing personnel shortages. ■ Successor model of 'IP3-FP8' The functions of the conventional model are maintained, and the communication format is the same, so no changes are required on the center side. ■ Contact Input/Output It has 8 contact inputs for reporting state changes and remote monitoring. New settings have been added for the presence or absence of contact change notifications and for determining the ON/OFF judgment time, allowing for diverse input judgments. It has 2 contact outputs for remote control and state acquisition. ■ Socket Communication and Email Notifications Like the conventional model, it supports socket communication and email notifications. It is also compatible with our "mi hurry2," allowing for state acquisition and control of contact outputs via email. ■ Added Contact Monitoring and Control Function During Power Outages Unlike the conventional model, which could not monitor or control contacts during power outages, this device can now perform these functions.

• Other network tools
• Other security and surveillance systems
• Demand Monitoring

15.4 WB ■Compliant with IEEE802.15.4 ■Supports Transparent Mode and API Command Mode ■Supports AES Encryption ■Supports Pulse/Analog Input

• Power Monitoring Equipment
• Other network tools
• Communications

High-speed mobile router with built-in HSDPA communication module ■ Compatible with Docomo/MVNO ■ Router function ■ Automatic dialing function ■ Packet filtering function ■ VPN function ■ Environmental resistance ■ Supports variable input voltage

• Other network tools
• Routers, Switches, and Hubs
• Communications

LTE, HSPA USB terminal compatible IoT/M2M router ■ Router function ■ Automatic dialing function ■ Packet filtering function ■ VPN function

• Other network tools
• Routers, Switches, and Hubs
• Communications

FOMA Ubiquitous Module Built-in High-Speed Mobile Router ■ Router Function ■ Automatic Dialing Function ■ IP Incoming Call Function ■ Packet Filtering Function ■ VPN Function ■ Environmental Resistance ■ Built-in 4-Port HUB ■ Supports Variable Input Voltage

• Other network tools
• Routers, Switches, and Hubs
• Communications

15.4 WB ■Compliant with IEEE802.15.4 ■Supports Transparent Mode and API Command Mode ■Supports AES Encryption ■Supports Pulse/Analog Input

• Power Monitoring Equipment
• Other network tools
• Communications

Power generation electricity quantity collection device ■ Communication method with power conditioner: proprietary communication protocol ■ Data logging ■ Time acquisition ■ DHCP client ■ Communication method with center: iND proprietary protocol

• Power Monitoring Equipment
• Other network tools
• Demand Monitoring

Power generation electricity quantity collection device ■ Communication method with power conditioner: proprietary communication protocol ■ Data logging ■ Time acquisition ■ DHCP client ■ Communication method with center: iND proprietary protocol

• Power Monitoring Equipment
• Other network tools
• Demand Monitoring

Mega Solar Monitoring Package ■ Mega Solar Monitoring System ■ Compatible with ECom-PV and ECom-PVM ■ Compatible with EDL-100 ■ Compatible with signage applications *For details such as configuration diagrams, please download and view the PDF materials.

• Power Monitoring Equipment
• Demand Monitoring
• Other energy equipment

The "EDL-100" is an IoT gateway for monitoring power equipment. It can be connected to our RS485-type contact input device "OP485in" and RS485-type analog input device "OP485ai" to monitor abnormal contact opening and closing, as well as analog quantities such as solar radiation and temperature. The aggregated data is transmitted to the center in real-time via HTTP communication, enabling centralized management by the center server. The monitoring software for the center server can be built by our company.

• Power Monitoring Equipment
• Demand Monitoring
• Other network tools

FOMA Ubiquitous Module Built-in High-Speed Mobile Router ■ Router Function ■ Automatic Dialing Function ■ IP Incoming Function ■ Packet Filtering Function ■ VPN Function ■ Environmental Resistance

• Other network tools
• Routers, Switches, and Hubs
• Demand Monitoring

Significant Reduction in Electricity Costs - By predicting demand values from the amount of electricity used and outputting alarms and control signals, peak power is cut. (Electricity costs are calculated based on basic fees and peak power, so this greatly reduces costs.) * The demand meter accumulates trading pulses to measure electricity consumption and performs predictive calculations of demand values every 30 minutes. Easy to implement and operate, making it highly effective for energy-saving measures. - Equipped with web functionality, you can easily connect to the Dmd Assist-100 from your computer's browser to immediately grasp demand forecasts for electricity usage. - Power monitoring is also possible from your smartphone or tablet while you are out. (Visualization of demand) - Aggregated data can be imported into your computer in CSV format, making it easy to create daily and monthly reports using Excel. Flexible equipment configuration allows for expansion. - Using the iND LAN-compatible contact monitoring and control device, we control lighting and air conditioning and provide alarm notifications (output to patrol lights). Demand control tailored to your equipment configuration is possible with a single Dmd Assist-100.

• Demand Monitoring
• Power Monitoring Equipment
• Other network tools

"E2Monitor" is application software that monitors the status and performs data logging of devices connected to the end device BeeP2A1 using IEEE802.15.4 wireless via Comm Assist-100Bee over a LAN. E2Monitor is a packaged software specialized in collecting and visualizing power consumption and data analysis using a database, aimed at achieving reductions in electricity usage.

• Other network tools
• Power Monitoring Equipment
• Demand Monitoring

It is possible to simultaneously enable remote monitoring of multiple devices on a LAN and RS-232C equipment via the FOMA network. Since multiple devices can be used with a single L2F Assist-AM, the introduction costs of FOMA equipment and communication costs can be significantly reduced. This device can be used for outdoor equipment such as parking payment machines that require strict environmental performance, outdoor camera monitoring, and data collection for export equipment. *Please note that a FOMA line contract is required to use this product. For information on how to contract, please consult our company or a sales agent.

• Other network tools
• Power Monitoring Equipment
• Demand Monitoring

■Simple Introduction By simply connecting the FPR-100, the terminal device can perform LAN-to-LAN connections using the FOMA network without any changes to hardware or software. ■Automatic FOMA Connection The FPR-100 automatically handles all outgoing and incoming processing for the FOMA network. ■Sharing of FOMA Adapter Set Among Multiple Terminal Devices The FPR-100 has IP masquerade and static IP address conversion functions, allowing multiple terminal devices to communicate with the FOMA network using a single FPR-100. ■At iND, we also provide individual support beyond standard specifications, so please feel free to contact us.

• Other network tools
• Routers, Switches, and Hubs
• Other security and surveillance systems

■Client and server functions ■Designed to be compact and lightweight, making it suitable for various installation locations. ■Easy initial setup ■Utilizes a unique message format to acquire contact input information and control contact output. ■We also offer systems that can monitor a large number of contact inputs/outputs or analog inputs using housings and optional units of the same size.

• Other network tools
• Other security and surveillance systems
• Demand Monitoring

The FOMA ubiquitous module has been replaced with the AME3240DO module, allowing RS-232C devices to be connected to the FOMA network using the protocol converter function.

• Other network tools
• Power Monitoring Equipment
• Demand Monitoring

It features high-speed data transfer capabilities of up to 100Mbps and has further improved communication quality compared to conventional models. Moreover, it is compact and lightweight, suitable for both external and embedded types. By using the iND protocol converter, devices that only have an RS-232C interface can also join the network, expanding the characteristics of the devices even further.

• Remote Control
• Other network tools

■ Easy Extension of Contact Connection Cables "Comm Assist-io-c, io-s" is used in a set of two. Communication between the two units is conducted using an Ethernet environment. Therefore, it can be easily installed if an Ethernet environment is available. ■ No Programming Required Users do not need to create programs. By connecting contact cables to each Comm Assist-io-c, io-s, mutual contact input and output can be performed. ■ Contact Input and Output The connector type features a D-sub 37-pin female connector, allowing for the connection of 8 contact inputs and 8 contact outputs. ■ TCP/IP Protocol Communication over Ethernet uses TCP/IP protocol, making it compatible with standard Ethernet environments.

• Other network tools
• Other security and surveillance systems
• Demand Monitoring