ソマックス List of Products and Services

The rust removal machine "Water Reamer," which automatically handles everything from cleaning the mold temperature control piping to rust prevention, has been newly released with a bidirectional circulation mode! It removes the layers of rust and impurities accumulated in the cooling water, improving cooling efficiency. 【Features】 〇 Increased cleaning power due to bidirectional circulation ← New! 〇 Easy operation that requires no disassembly of the mold; simply connect the mold and this product with a hose 〇 Forms a rust prevention coating simultaneously with rust removal 〇 Adopts an air blow drying system, eliminating the need for water washing or neutralization treatment after rust removal 〇 Does not discharge rust removal liquid due to a completely closed system

The mold temperature control piping cleaning machine "Scattos" has significantly increased the cleaning liquid capacity to 60L, in addition to the functions of the conventional "Water Reamer." It is now capable of cleaning the temperature control piping of die-cast molds and large molds, as well as accommodating manifolds and below hoppers. Furthermore, the synergistic effect with the specially formulated cleaning liquid (Scattos WR-1), which has enhanced penetration power, maximizes cleaning effectiveness. Please utilize it to help alleviate labor shortages. 【Features】 - Compatible with large molds, die-cast molds, manifolds, and below hoppers - Built-in flow meter to quantify cleaning effectiveness - Pump power increased threefold (compared to WR-11-ADIII) - Automatic control of pump power output according to piping diameter - Simultaneously removes rust and automatically forms a rust prevention coating - Enhanced cleaning power through hybrid cleaning

Mold cooling is a very important factor in consistently producing good products. If molding defects occur due to a decrease in flow rate or an increase in surface temperature, it may be caused by the accumulation of rust or scale in the piping. The mold temperature control piping cleaning machines "Scatus" and "Water Reamer" dissolve and remove rust and scale from the piping and even perform rust prevention. The large-scale compatible "Scatus" is widely applicable to die casting, manifolds, and the hoppers of molding machines. It is sure to be a strong ally in the molding field. Please make good use of it.

The "Water Remover" is a rust removal machine that automatically handles everything from cleaning mold temperature control piping to rust prevention. It removes layers of rust and impurities that have accumulated in the mold temperature control piping, improving cooling efficiency. 【Features】 - No need to disassemble the mold; simply connect the mold and this product with a hose for easy operation. - Forms a rust prevention coating simultaneously with rust removal. - Adopts an air blow drying system, eliminating the need for rinsing or neutralization after rust removal. - Does not discharge rust removal liquid due to a completely closed system.

The mold temperature control piping cleaning machine "Water Reamer" is a rust removal machine that automatically handles everything from cleaning to rust prevention of mold temperature control piping. It dissolves and removes rust and scale (a layer of accumulated impurities in water) that occurs inside the mold temperature control piping, improving cooling efficiency. There is no need to disassemble the mold, and all processes of rust removal, drying, and rust prevention are performed automatically, reducing labor and addressing labor shortages. 【Features】 〇 No need to disassemble the mold; simply connect the mold and cleaning machine with a hose for easy operation. 　→ Anyone can easily perform it. 〇 Complete rust removal, drying, and rust prevention for the entire piping in one process. 　→ Other work can be done while cleaning. 〇 Forms a rust prevention coating simultaneously with rust removal. 　→ No other liquids or chemicals are needed. 〇 Preventive maintenance from the time of new use. 　→ Enables stable production management. 〇 Adopts an air blow drying system. 　→ No need for water washing or neutralization treatment after rust removal. 〇 The shape of the piping does not matter for liquid circulation. 　→ Complex 3D piping can also be cleaned. 〇 No discharge of cleaning liquid due to a completely closed system.

Preventing corrosion of molds during storage and preventing mold-related issues. This is what I consider to be mold preventive maintenance! The mold temperature control piping cleaning machine "Water Reamer" is a rust removal cleaning machine that removes layers of rust and accumulated impurities from the water contained in the temperature control piping, restoring cooling efficiency.

＼The arrival of full-fledged summer!／ Do you have any of these concerns? ● Increased rate of molding defects such as stringing, sink marks, and warping ● Decreased yield rate ● Extended cooling time for molded products ● Lengthened molding cycle ● Increased electricity, water, and material costs The cause is that thing stuck in the temperature control piping (cooling pipes)! Clear it up with pipe cleaning! ＼For summer mold countermeasures!／ Currently being offered for free nationwide in Japan! 【1】Free! Endoscope check service We will check the degree of clogging in your company's mold temperature control piping (cooling pipes). 【2】Free! Demonstration Try out our outstanding pipe cleaning power with your company's molds! Feel free to contact us for demonstrations or to request catalogs!

In response to customer requests such as "I want to try it out!" and "I want to test it in-house!", we are currently offering free demonstrations nationwide where you can try the products you desire! We have prepared three methods for you, so please take this opportunity to experience the exceptional cleaning power with your company's molds! 【1】 Nationwide On-Site Demo A free on-site demonstration where we visit anywhere in Japan with the actual equipment. 【2】 Online Demo A service that provides product introductions and operational explanations via the internet for customers who find it difficult to conduct face-to-face demonstrations. 【3】 Demo in the Cleaning Test Room A demonstration conducted in our "Cleaning Test Room," which includes a measurement and analysis room, where customers can visit our facility. Please feel free to contact us for demonstrations or to request catalogs!

Somax Corporation is currently conducting free demonstrations in our "Cleaning Test Room," where customers are invited to visit. 【Well-Equipped Test Room and Analysis Equipment】 In addition to our mold cleaning machine, the Cripica Ace, we offer a range of mold maintenance equipment, including: - Electron microscopes - Optical microscopes - Laser microscopes - X-ray analysis equipment and more, all equipped for analysis! We can conduct test cleaning with large cleaning machines and observe large-sized molds that cannot fit on a desk. The cleaning tests will be handled by experienced staff. Additionally, we will prepare a cleaning test report. You can apply for a free demonstration in the cleaning test room through our website. We also welcome inquiries just to hear more about our services! ▼ Request a free demo here https://www.somax.co.jp/demonstration/form/ For more details, please check our catalog, which is available for free download. Feel free to contact us!

Calcium scale hinders temperature control! If left unattended, the internal piping of temperature control systems in molds, such as blow molding and plastic molding, can accumulate layers of impurities found in water, like calcium. This calcium scale, which has insulating properties, interferes with temperature management and can lead to molding defects. With the mold temperature control piping cleaning machine "Scattus," you can clean the internal piping without damaging it by simply connecting the mold to the cleaning machine with a hose! Furthermore, after cleaning, air blow drying forms a protective film, making it recommended for preventive maintenance as well! The new product "Scale Remover Scattus SK-1" can clean copper and aluminum piping! It is especially suitable for blow molding molds!