廣杉計器 List of Products and Services

■Features - This is a flat washer made of silicone rubber 50. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By inserting a flat washer between the screw and the workpiece, the seating area is expanded, reducing the surface pressure on the target material, thereby maintaining a consistent fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features - This is a flat washer made of Hane Night (V-0). - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for passing the screw through. - By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, maintaining a certain fastening force, and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features - This is a flat washer made of Hane Night material. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for passing the screw through. - By inserting a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS (6 substances).

■Features - It is a flat washer made of fluororubber. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features - This is a flat washer made of urethane rubber. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features - This is a flat washer made of silicone rubber with a hardness of 70°. - Washers are generally used by placing them between a screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By inserting a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features - This is a flat washer made of EPDM (ethylene propylene rubber). - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - The washer is a thin, disc-shaped component with a hole in the center for the screw to pass through. - By inserting a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, which helps maintain a consistent fastening force, prevents loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - It refers to flat washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features - This is a flat washer made of NBR (nitrile rubber). - Washers are generally used by placing them between a screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the material, which helps maintain a certain fastening force, prevents loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - Refers to flat washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2 standards.

■Features - This is a flat washer made by CNR. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features - This is a flat washer made of CR (chloroprene rubber). - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features - This is a flat washer made of pure titanium. - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the parts. - By using a washer, it is possible to alleviate contact between parts, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of bronze. - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material and maintaining a certain fastening force, which helps prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the parts. - By using a washer, it is possible to alleviate contact between parts, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of lead-free, easy-cut aluminum (black anodized). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the parts. - By using a washer, it is possible to alleviate contact between parts and reduce wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of lead-free free-cutting aluminum (pickled). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By inserting a washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, thereby maintaining a certain fastening force and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the parts. - By using a washer, it is possible to alleviate contact between parts, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of aluminum (black anodized). - A metal washer (also known as a shim) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material and maintaining a consistent fastening force, which helps prevent loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - It also serves to prevent direct contact between the bolt or nut and the surface of the part. - By using a washer, it is possible to alleviate contact between parts, reducing wear and corrosion. - Washers can be used as substitutes for flat washers, round washers, round shims, or plain washers (sometimes abbreviated as "W").

■Features - It is a flat washer made of aluminum. - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material and maintaining a certain fastening force, which helps prevent loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - It also serves to prevent direct contact between the bolt or nut and the surface of the part. - By using a washer, it is possible to alleviate contact between parts and reduce wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - It is a flat washer made of iron (black baked finish). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thus maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the part. - By using a washer, it is possible to alleviate contact between parts, thereby reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - It is a flat washer made of iron (electroless nickel plating). - A metal washer (also known as a shim) is a metal part that is placed between a bolt and a nut. - Washers (shims) are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the component. - By using a washer, it is possible to alleviate contact between components, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round shims, or plain washers (sometimes abbreviated as "W").

■Features ・This is a flat washer made of iron (trivalent chromium). ・A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. ・Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the part. ・Using a washer can alleviate contact between parts, reducing wear and corrosion. ・Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - It is a flat washer made of iron (black baked finish). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By inserting a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the part. - By using a washer, it is possible to alleviate contact between parts, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - It is a flat washer made of iron (electroless nickel plating). - A metal washer (also known as a shim) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the component. - By inserting a washer, it is possible to alleviate contact between components, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

- This is a flat washer made of iron (trivalent chromium). - A metal washer (also known as a shim) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material and maintaining a certain fastening force, which helps prevent loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the component. - By using a washer, it is possible to alleviate contact between components and reduce wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of brass (without plating). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent bolts and nuts from directly contacting the surface of the parts. - By using washers, it is possible to alleviate contact between parts, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of brass (nickel-plated). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, maintaining a certain fastening force, and preventing loosening of the screw and damage to the fastening surface, while stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the parts. - By using a washer, it is possible to alleviate contact between parts and reduce wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of brass (without plating). - A metal washer (also known as a shim) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material and maintaining a certain fastening force, which helps prevent loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the component. - By using a washer, it is possible to alleviate contact between parts and reduce wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round shims, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of brass (nickel-plated). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the parts. - By using a washer, it is possible to alleviate contact between parts, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of stainless steel (SUS304). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By inserting a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thus maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the component. - By using a washer, it is possible to mitigate contact between components, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of stainless steel (SUS316). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, which helps maintain a certain fastening force, prevents loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the parts. - By using a washer, it is possible to alleviate contact between parts, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features - This is a flat washer made of stainless steel (SUS304). - A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. - Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the parts. - By using a washer, it is possible to alleviate contact between parts, reducing wear and corrosion. - Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features ・This is a flat washer made of stainless steel (SUS303). ・A metal washer (also known as a washer) is a metal part that is placed between a bolt and a nut. ・Washers are generally used when tightening screws, placed between the screw and the workpiece to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・By placing a washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, maintaining a certain fastening force, and preventing loosening of the screw and damage to the fastening surface, while stabilizing the seating surface. ・Additionally, it serves to prevent direct contact between the bolt or nut and the surface of the part. ・Using a washer can alleviate contact between parts, reducing wear and corrosion. ・Washers can be used as alternatives to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W").

■Features ・This is a flat washer made of baked material. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By inserting a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

■Features ・This is a low creep flat washer. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thus maintaining a certain fastening force and preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

■Features - This is a flat washer made of polyvinyl chloride (PVC). - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features ・This is a flat washer made of polyvinyl chloride. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・The washer is a thin disc with a hole in the center for passing the screw through. ・By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS (6 substances).

■Features ・This is a flat washer made of PTFE. ・Washers are generally used by placing them between a screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By inserting a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

■Features ・This is a flat washer made by RENY. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, which helps maintain a consistent fastening force, prevents loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. ・It refers to flat washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

■Features ・This is a flat washer made by RENY. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the seating area is expanded, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

■Features - It is a flat washer made of silicone. - Washers are generally used by placing them between a screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features - This is a flat washer made of PVDF. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - The washer is a thin disc with a hole in the center for the screw to pass through. - By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, maintaining a certain fastening force, and preventing loosening of the screw, damage to the fastening surface, and stabilizing the seating surface. - It refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features ・This is a flat washer made of PPS. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, maintaining a certain fastening force, and preventing loosening of the screw, damage to the fastening surface, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

■Features ・This is a flat washer made of PPS. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the contact area is increased, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

■Features ・This is a flat washer made of polypropylene. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for passing the screw through. ・By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the material, thereby maintaining a certain fastening force and preventing loosening of the screw, damage to the fastening surface, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.

■Features - This is a flat washer made by Peak. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. - By inserting a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the material, which maintains a certain fastening force, prevents loosening of the screw, protects the fastening surface from damage, and stabilizes the seating surface. - Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features - This is a flat washer made of Duracon. - Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. - Washers are thin, disc-shaped, with a hole in the center for the screw to pass through. - By inserting a flat washer between the screw and the workpiece, the seating area is expanded, reducing the surface pressure on the target material, thereby maintaining a certain fastening force, preventing loosening of the screw, protecting the fastening surface from damage, and stabilizing the seating surface. - Refers to flat washers, round washers, round washers, or plain washers (sometimes abbreviated as "W"). - Compliant with EU-RoHS2.

■Features ・It is a flat washer made of shock-absorbing nylon. ・Washers are generally used by placing them between the screw and the workpiece when tightening screws, to prevent loosening of the screw, protect the fastening surface from damage, and stabilize the seating surface. ・Washers are thin, disc-shaped, and have a hole in the center for the screw to pass through. ・By placing a flat washer between the screw and the workpiece, the seating area is enlarged, reducing the surface pressure on the target material, maintaining a certain fastening force, and preventing loosening of the screw, damage to the fastening surface, and stabilizing the seating surface. ・Refers to flat washers, round washers, round washers, and plain washers (sometimes abbreviated as "W"). ・Compliant with EU-RoHS2.