カテックス List of Products and Services

"MEGATORQUE G&U" is a timing belt that provides a large transmission capacity. It has approximately twice the transmission capacity compared to rubber timing belt STPD. Additionally, it can be made about 40% narrower on average with the same pulley diameter. Pulleys for STPD (S8M, S14M) can be used as they are. 【Features】 ■ Provides a large transmission capacity ■ Allows for a compact design ■ Compatible with conventional pulleys ■ Engagement transmission *For more details, please refer to the PDF materials or feel free to contact us.

The "Mega Torque G2" is a timing belt that offers a large transmission capacity. By adopting a new material for the core wire, it suppresses belt elongation and enables high-load transmission. It has approximately 1.5 times the transmission capacity compared to the "Mega Torque G." It employs wear-resistant, low-friction treated canvas, improving durability under high loads. Additionally, it operates at low noise levels, achieving about an 18% reduction under the same usage conditions through the use of dedicated pulleys and a narrower design due to high transmission capacity. 【Features】 ■ New material used for the core wire ■ Suppresses belt elongation and enables high-load transmission ■ Long life ■ Low noise ■ Engagement transmission *For more details, please refer to the PDF document or feel free to contact us.

"MEGATORQUE EX" is a timing belt with high positioning characteristics. By adopting ultra-high elasticity special core wires, it achieves high jumping torque and can prevent tooth skipping during rapid deceleration. The belt has very little elongation, and by using a special pulley that minimizes backlash, the repeat positioning accuracy has improved, realizing high positioning characteristics. 【Features】 ■ High jumping characteristics ■ High damping characteristics ■ High repeat positioning accuracy ■ Engagement transmission *For more details, please refer to the PDF document or feel free to contact us.

The "Trapezoidal Gear Timing Belt G" is a synchronous transmission belt that resolves the issues associated with chains and gears. It is lightweight and thin, and excels in flexibility, allowing for compact designs. Additionally, it enables high-efficiency and high-speed transmission. In particular, belts with small pitches are suitable for precision and information equipment. 【Features】 ■ Lightweight and thin, with excellent flexibility ■ Allows for compact designs ■ Enables high-efficiency and high-speed transmission ■ Lower noise compared to chains and gears ■ Cost reduction is achievable *For more details, please refer to the PDF materials or feel free to contact us.

The "Trapezoidal Gear Timing Belt U" is a belt suitable for light load transmission where precision is required. The beautiful colors unique to polyurethane enhance the machine and create a clean working environment. It is highly flexible, adapts well to small pulley diameters, and allows for smooth operation. It can operate quietly. Additionally, custom manufacturing of special-shaped belts is also possible. 【Features】 - Suitable for light load transmission where precision is required - Aesthetically pleasing appearance with no contamination of contact materials - Allows for smooth operation - Can operate quietly - Custom manufacturing of special-shaped belts is also possible *For more details, please refer to the PDF document or feel free to contact us.

The "trapezoidal gear timing pulley" is a pulley that provides good transmission. It is machined using a hob cutter. We also accept orders for materials, shapes, and processing. Timing belt transmission demonstrates its power only when a high-precision belt meshes smoothly with a precisely designed and machined pulley. 【Features】 ■ Machined using a hob cutter ■ Orders for materials, shapes, and processing are also accepted (Please be sure to use the specified pulley) ■ Meshing transmission *For more details, please refer to the PDF document or feel free to contact us.

The "long-length timing belt" is a belt for long-span linear drives and light-load synchronous transmission and conveyance. It allows for long-span configurations, greatly increasing design flexibility. At Catex, we fully utilize our trading company functions to meet a wide variety of belt needs and ensure timely supply. 【Features】 ■ Open-end & endless ■ Capable of long-span configurations ■ High design flexibility ■ Engagement transmission *For more details, please refer to the PDF materials or feel free to contact us.

The "Standard V-Belt" is a belt that is effective for multiple sheave applications with its "set-free" design, offering excellent dimensional stability. It is widely used as a means of power transmission, being economical, easily accessible, and simple to replace. In addition, we also offer the high-load transmission belt "Red V-Belt," which excels in heat resistance, oil resistance, bending resistance, and static prevention. 【Features】 ■ Widely used as a means of power transmission ■ Effective for multiple sheave applications with "set-free" ■ Excellent dimensional stability ■ Superior in heat resistance, oil resistance, bending resistance, and static prevention (Red V-Belt) ■ Friction transmission *For more details, please refer to the PDF document or feel free to contact us.

The "Maxstar Wedge V-Belt" is a V-belt with a unique narrow shape that possesses high transmission capability. It can operate at high speeds of up to 40 m/sec. All multi-strand applications are effective with the "set-free" design, which offers good dimensional stability, and the wedge pulleys are standardized in an easy-to-install bushing type. 【Features】 ■ Energy-saving and compact design ■ Excellent heat resistance and static electricity prevention ■ Good dimensional stability ■ Wedge pulleys standardized in an easy-to-install bushing type ■ Friction transmission *For more details, please refer to the PDF materials or feel free to contact us.

The "Wedge Bushing Pulley" is a bushing system that allows for the attachment and detachment to the shaft using just one wrench. It prevents damage to the shaft and shaft hole, ensuring a long lifespan for the shaft. Positioning of rotating bodies such as pulleys is smooth, and alignment is easy. The boss width can be designed to be small, allowing for a reduction in pulley weight. 【Features】 ■ Achieves long lifespan for the shaft ■ No post-processing of the shaft hole is required ■ Smooth positioning of rotating bodies such as pulleys ■ The small design of the boss width allows for a reduction in pulley weight ■ Friction transmission *For more details, please refer to the PDF document or feel free to contact us.

The "Ribster G (Rubber V Ribbed Belt)" is a belt that combines the high transmission of V-belts with the flexibility of flat belts. It enables high-speed and high-efficiency operation. In addition to excellent heat and wear resistance, it also has low belt vibration, allowing for a compact design. 【Features】 ■ Capable of high-speed and high-efficiency operation ■ Rich in flexibility, suitable for use with small pulley diameters ■ Excellent heat and wear resistance ■ Low belt vibration, enabling a compact design ■ Friction transmission *For more details, please refer to the PDF document or feel free to contact us.

The "Libster U (PuV Ribbed Belt)" is a belt made of polyurethane that combines the features of flat belts and V-belts. It uses nylon cords in its core, providing excellent flexibility and allowing for use with small pulley diameters (down to a minimum of φ20mm). It also excels in resistance to bending fatigue. Additionally, it produces minimal vibration and allows for smooth rotation. 【Features】 ■ Usable with small pulley diameters (down to a minimum of φ20mm) ■ Minimal vibration and smooth rotation ■ Capable of withstanding high-speed operation ■ Excellent wear resistance, oil resistance, and ozone resistance ■ Friction transmission *For more details, please refer to the PDF document or feel free to contact us.

The "Rib Star Pulley (V Ribbed Pulley)" adopts a "bushing system" that makes it easy to attach and detach from the shaft and position it, except for some sizes. At Catex, we fully utilize our trading company functions to meet a wide variety of belt needs and ensure timely supply. 【Features】 ■ Easy attachment, detachment, and positioning on the shaft ■ Adoption of a bushing system *For more details, please refer to the PDF materials or feel free to contact us.

The "Flex Star Belt" has a large transmission capacity, a compact design, and allows for cost reduction. It operates with minimal vibration, providing smooth and quiet operation, and can withstand high-speed operation of up to 60 m/sec. In addition to having heat resistance, oil resistance, and anti-static properties, it experiences extremely little elongation, requiring almost no re-tensioning. 【Features】 ■ Minimal vibration, allowing for smooth and quiet operation ■ Heat resistance, oil resistance, and anti-static properties ■ Extremely little elongation, requiring almost no re-tensioning ■ Cost reduction in transmission design ■ Friction transmission *For more details, please refer to the PDF document or feel free to contact us.

The "Super Flexstar Belt" is a high-tension flat belt developed for dewatering applications by inserting materials between the belt and the pulley. Due to its high belt tension, it can be used not only for compression purposes but also for other applications such as transportation. 【Structure】 ■ Upper cover: Special synthetic rubber with excellent wear resistance, weather resistance, and alcohol resistance ■ Lower cover: Chloroprene rubber that mitigates external impacts and protects the core wire ■ Core wire protection material: Strongly bonds adhesive rubber and cover rubber to protect the core wire ■ Core wire: Special aramid core wire with low elongation and high tensile strength ■ Adhesive rubber: Strongly bonds the core wire and protects it *For more details, please refer to the PDF document or feel free to contact us.

The "Flexstar J Series (Thin Flat)" is a high-precision flat belt developed for the transportation of tickets, cards, banknotes, and coins. It is thin, flexible, and seamless. It offers excellent running stability and ensures reliable transportation. It has outstanding wear resistance and environmental adaptability, and it is maintenance-free. 【Features】 ■ Excellent running stability ■ Reliable transportation ■ Superior wear resistance and environmental adaptability ■ Maintenance-free ■ Friction drive *For more details, please refer to the PDF document or feel free to contact us.

The "Polymax Belt (Urethane)" is a wide-angle belt with a 60° angle system. It allows for low vibration and high-speed transmission. It can be designed compactly, leading to cost reduction. Additionally, it has minimal stretch and is maintenance-free. 【Features】 ■ Low vibration and high-speed transmission ■ Compact design leading to cost reduction ■ Minimal stretch and maintenance-free ■ Excellent weather resistance ■ Friction transmission *For more details, please refer to the PDF document or feel free to contact us.

The "Polyurethane MB Belt" is a small belt designed for light load transmission, featuring a transparent and beautiful appearance. It has high flexibility, can be used with small pulley diameters, and excels in abrasion resistance, allowing for clean operation. Additionally, it enables operation with minimal slipping. 【Features】 ■ Transparent and beautiful appearance ■ Excellent abrasion resistance, allowing for clean operation ■ Operation with minimal slipping ■ Excellent oil resistance ■ Friction transmission *For more details, please refer to the PDF document or feel free to contact us.

"Star Rope Super Star Rope" is an open-end polyurethane belt. It can freely accommodate complex transmissions such as multi-axis transmission and direction changes. It can be easily joined with thermal welding. You can obtain the belt of the necessary length when needed, making it convenient. 【Features】 ■ Open-end ■ Easily joinable with thermal welding ■ Excellent wear resistance and oil resistance ■ Friction transmission *For more details, please refer to the PDF materials or feel free to contact us.

The "Flat Belt" is a high-quality belt made from premium canvas and synthetic rubber. It has minimal shrinkage and excellent bending resistance. It is resistant to heat, water, and oil. It is suitable for textile machinery, agricultural machinery, and more. 【Features】 ■ Made from premium canvas and synthetic rubber ■ Minimal shrinkage ■ Excellent bending resistance ■ Friction transmission *For more details, please refer to the PDF document or feel free to contact us.

The "High-Performance Compact Coupling - Chemichan" is a future-oriented, high-functionality compact coupling. It enables accurate transmission of rotational power and precise positioning. It follows the severe start-stop movements of the power shaft and has ample durability. 【Features】 ■ Excellent vibration absorption ■ Low noise operation that meets environmental needs ■ Accurate transmission of rotational power and precise positioning ■ Follows the severe start-stop movements of the power shaft with ample durability *For more details, please refer to the PDF document or feel free to contact us.

The "Hyperflex Coupling" is widely used in various pumps and general industrial machinery. There are two types: the "MT type," which is compact and has a high torque transmission capacity, and the "MH type," which utilizes the shear stress of elastic rubber. 【Features】 ■ MT Type - Compact with high torque transmission, suitable for various applications - Easy to install and maintenance-free ■ MH Type - High flexibility with excellent shock absorption performance - Can be used as a torque limiter *For more details, please refer to the PDF document or feel free to contact us.

"Chankapuringu No-Mekkusu" is a compression stress type coupling with many world patents (Japan, Germany, USA, UK, and others). It consists of a specially shaped elastomer that can withstand large transmission torque and a flange, allowing for 20 types and 301 combinations. The elastomer can be easily installed and replaced without moving the machine. 【Features】 ■ Compact size with high transmission torque, energy-saving type ■ Suitable for high-speed rotating machines ■ Easy installation and replacement of the elastomer without moving the machine ■ Compact design, quiet operation, maintenance-free ■ Wide variety of sizes and types *For more details, please refer to the PDF document or feel free to contact us.

The "Star Lock" is a locking system that allows for easy, reliable, and powerful fastening of shafts and bosses without any troublesome keyway machining. It eliminates the hassle of calculations and management associated with interference fits and press fits, ensuring secure fastening with high surface pressure easily. 【Features】 ■ No need for shaft holes or keyway machining ■ Non-backlash ■ Can be set at any position on the shaft ■ Easy to install and remove *For more details, please refer to the PDF document or feel free to contact us.

The "Sleeve Roll (Urethane Molded Type)" is a new concept of press-fit roller covering material and cushioning material, made from a two-layer structure of soft and hard urethane that is integrally molded. It can be easily attached by simply pressing it onto iron cores or rollers, and it exhibits strong grip power. Compared to resin or rubber rolls, it excels in wear resistance and oil resistance, as well as water resistance and weather resistance. 【Features】 - Eliminates the hassle of baking (lining) onto iron cores or rollers and re-wrapping with adhesives, making it very economical. - The two-layer structure of soft and hard materials absorbs shocks, allowing for quiet back-side transport. - Contributes to noise reduction and damage prevention. - Maintains cleanliness by preventing rust or other contaminants from adhering to the transported items. *For more details, please refer to the PDF materials or feel free to contact us.

The "Extremaltus High-Speed Drive and Light Transport Flat Belt" is a composite flat belt developed in response to the needs of both domestic and international industries aiming for a balance between excellent transmission efficiency and reduced running costs. Various materials are used for the friction materials and top coatings. It can simultaneously drive multiple shafts rotating in the same or opposite directions. With a rich product lineup, it is used in various driving and transport fields in industries such as papermaking, paper processing, printing, and logistics. 【Features】 ■ Stable and safe use ■ Quick installation ■ Short take-up range ■ No take-up required (elastic type) ■ Reduction of shaft load ■ Reduced operating costs and long lifespan ■ Compatible with small pulley diameters, energy-saving effects *For more details, please refer to the PDF document or feel free to contact us.

Our company, Catex, is a proposal-based trading company with integrated manufacturing functions. In addition to the design, development, and sales of polymer chemical products, we respond to diverse needs ranging from small lots of various types to mass production, including the production and sale of rubber and plastic parts. Utilizing our unique network, we handle everything in-house, contributing to reduced ordering hassle, cost reduction, and shortened delivery times. [Strengths of Our Industrial Products Sales Division] - We can provide everything from production equipment to processed products, molds, and raw materials through our trading company functions. - We also accommodate modifications of existing equipment, design and manufacture of jigs, and sales of FA equipment. - We collaborate with group companies such as "Catex Engineering," which can perform precision to large-scale resin molding, "Catex Tokai," which can handle difficult machining with 5-axis machining centers, and "Two One," which can provide a consistent response from raw materials to molding and processing of rubber. *For more details, please refer to our company brochure (updated September 2021). Feel free to contact us with any inquiries.

Our company, Catex, enables total planning from design to production and launch by utilizing our own group companies and unique networks. As a "trading company with manufacturing capabilities," we solve problems in manufacturing sites and production! 【About Catex】 ■ Equipment and Devices (In-house designed mechatronic products) - Conveyors - Packaging machines - Inspection devices (image, sound, load, roundness, dimensional accuracy, scratches, foreign objects, etc.) - Labor-saving, reduced manpower, automation, collaborative lines - Press machines, insertion machines - Jigs for processing machines, inspection jigs, assembly jigs - Electrical wiring work - FA equipment sales - In-house design ■ Molded Products - Rubber molded products, rubber rollers - Plastic molded products - Two-color and multi-color molding - Molds - Assembly - Post-processing such as painting and decoration ■ Processed Products - Rubber processed products - Resin (plastic) processed products - Metal processed products ■ Product Sales - Rubber products - Resin (plastic) products - Repair parts and supplies for factories - Construction of factory facilities (lighting, curtains, tent warehouses, etc.) - Various materials *Feel free to contact us for inquiries!

Our company, Catex, enables total planning from design to production and launch by utilizing our group companies and unique network. As a "trading company with manufacturing capabilities," we solve problems in manufacturing sites and production! 【About Catex】 ■ Equipment and Devices (In-house designed mechatronic products) - Conveyors - Packaging machines - Inspection devices (image, sound, load, roundness, dimensional accuracy, scratches, foreign objects, etc.) - Labor-saving, reduced workforce, automation, collaborative lines - Press machines, insertion machines - Jigs for processing machines, inspection jigs, assembly jigs - Electrical wiring work - FA equipment sales - In-house design ■ Molded Products - Rubber molded products, rubber rollers - Plastic molded products - Two-color and multi-color molding - Molds - Assembly - Post-processing such as painting and decoration ■ Processed Products - Rubber processed products - Resin (plastic) processed products - Metal processed products ■ Product Sales - Rubber products - Resin (plastic) products - Repair parts and supplies for factories - Construction of factory facilities (lighting, curtains, tent warehouses, etc.) - Various materials *Feel free to consult with us first! Please do not hesitate to contact us.

We create animations based on 3D data. We can create animations not only for our products but also for other products. We will make it easy to understand how the equipment operates through animation. We can create various videos, including processes, replacement procedures, disassembly, and appearances. We can accommodate all conditions, such as changing angles and inserting captions. Please feel free to contact us.

We would like to introduce the "Power Transmission Synchronous Belts" handled by Catex. Our lineup includes the "Poly Chain GT Carbon Belt," which is specialized for low-speed high-torque applications, and the "Power Grip EV Belt," which adopts a new arc tooth profile. You can choose according to your application. 【Product List】 ■ Poly Chain GT Carbon Belt ■ Power Grip EV Belt ■ Power Grip GT Belt ■ Power Grip HTD Belt ■ Power Grip Timing Belt ■ Power Grip Long Length Belt *For more details, please refer to the PDF document or feel free to contact us.

Features - Wide range of measurable belts Compatible with various belts such as timing belts, flat belts, V-belts, and V-ribbed belts. - Simultaneous display of belt vibration frequency and tension value With a two-line display, frequency and tension values can be checked on the same screen. - Two types of unit display selectable The unit switch allows for display in either [kgf] or [N]. - Wide measurement frequency range Can measure a broad frequency range of 10.0 to 999 [Hz] (upper three digits). - Short measurement time due to unique high-speed data processing By adopting a high-performance single-chip microcontroller and unique data processing, tension measurement can be performed in a short time (as short as 0.5 seconds). - Memory function included Can store 10 types of tension measurement data and 89 types of unit mass data. - Auto power-off function included The power will automatically turn off after 5 minutes of inactivity, preventing battery drain due to forgetting to turn off the power switch. - Switchable between Japanese and English By pressing and holding the "0" and "Enter" keys simultaneously when powering on, the display can be switched between Japanese and English.

The "Chankappling S Series" is a small coupling with a high transmission torque. It is lightweight and compact, making installation and removal easy. It operates quietly and has a long expected lifespan. It is widely used in general industrial machinery such as cranes and industrial sewing machines. 【Features】 ■ Small size with high transmission torque ■ Lightweight and compact, easy to install and remove ■ Suitable for high-speed rotating machinery ■ Quiet operation with an expected long lifespan ■ Maintenance-free *For more details, please refer to the PDF materials or feel free to contact us.