伊藤彰産業 List of Products and Services

Can manufacturing frame - can manufacturing, sheet metal, welding 2000 x 4000

• Steel

Pinion shaft until press-fitting, approximately 300φ.

• Drive system parts

Hot press parts Over 30 locations for gun drilling, with the top and bottom surfaces polished to Ra 0.2 or less.

• Other heaters

Generator motor cover Forging ~ Machining ~ (Welding, Painting)

• Generators and transmission motors

This is a part of cement manufacturing equipment. Casting of a cast iron piece approximately φ1500×400 from foam type to casting, followed by key machining on a slitter after machining.

• Other metal materials

Ito Akira Industry leverages an overwhelming variety of steel types as its strength, along with the advantages of short lead times and the convenience of accepting orders from just one piece. This document introduces examples of steel processing, including "laser processing" and "bevel processing," using photographs. It serves as a resource for hints on production. We encourage you to read it! ▼ About Processing Technology (Minimum 1 piece) Various cutting processes / Machining (drilling, milling, turning) / Laser cutting Water jet / BTA processing / Bending, bevel processing, welding / Heat treatment, plating *Due to inventory holdings, there is no purchase of scrap materials. ▼ Types of Steel Handled (Partial List) General steel materials, special steel, polished materials, quenched steel, castings, low thermal expansion alloys (Invar) Stainless steel, Swedish steel, high manganese steel, aluminum, brass, copper alloys, etc. ⇒ Rare steel materials are also in stock! ▼ Excerpts from Listed Examples (Total of 19 Examples) ■ [SNCM439 Processed Products] Ultra-special processing from round bar forging to wire cutting ■ [HARDOX500 Processed Products] Laser cutting + conical bending processing ■ [SS Pipe Processed Products] Band saw cutting + hot-dip galvanizing *Please feel free to contact us.

• Processing Contract
• Special Steel
• alloy

Our company achieves short delivery times even for a wide variety of small lots due to the large selection of steel materials we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Case Introduction】 Material: SNCM439 (Nickel-Chromium-Molybdenum Steel) Size: t110 Forged Product Processing Method: Round bar cutting + forging + cutting + heat treatment → Due to oversized cutting dimensions, outer circumference + wire cutting Application: Material that will be processed into precision parts 【Processing Story】 ▶ The material is special and difficult to obtain, and the size is limited, so the required dimensions cannot be achieved. ▶ Therefore, the round bar is forged into a block shape to adjust the thickness, width, and length, and the outer circumference is cut using cutting. ▶ Since there is further processing in the subsequent steps, heat treatment is performed to adjust the hardness of the material, making it easier to process. ▶ Normally, this would be the end of the process. ▶ However, there was a request to reduce the outer diameter by 10mm, so it was cut using wire cutting, resulting in the product shown in the photo along with leftover material. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Other machine elements
• Processing Contract

Our company realizes short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Examples】 Material: HARDOX450 Application: Liner / Shooter Size: t4 Processing Method: Laser cutting + bending (conical bending) ⇒ Large products made of wear-resistant steel, no welding due to transportation issues. Small items are produced in two parts, and large items in four parts. 【Benefits of Processing at Our Company】 ▼ Since we also sell steel materials, we always have wear-resistant steel in stock and can process it immediately. ▼ We can consistently handle laser and bending processing, enabling short delivery times. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Substrate transport device (loader/unloader)

Our company achieves short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We handle quantities starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Example of Processing】 Material: SS Pipe Size: φ60.5×t2.3×350 Processing Method: Band saw cutting + hot-dip galvanizing (no lifting holes needed for pipes) Application: Components for electrical equipment 【Benefits of Processing at Our Company】 ▼ High convenience as we can accommodate orders starting from one cut piece ▼ We provide a comprehensive service for cutting, drilling for galvanizing, and galvanizing treatment from stock *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Distribution Board

Our company achieves short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SS material Size: t6×150×150 Processing Method: Band saw cutting + hot-dip galvanizing (suspension holes required) Application: Components for electrical equipment used outdoors 【Benefits of Processing at Our Company】 ▼ Since we can perform cutting, hole drilling for galvanizing, and galvanizing treatment all in one place, we can reduce the hassle and cost of arrangements. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Distribution Board

Our company realizes short delivery times even for small lots of various types of steel materials due to the wide variety of products we handle and our abundant inventory. We accept orders starting from just one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: LEX-SF1 (low thermal expansion alloy) Size: t12 (6+6) × 150 × 268 Processing Method: Cut out using a band saw Application: For parts that require precision. For areas that should not be affected by heat. 【Benefits of Processing at Our Company】 ▼ Typically, manufacturers take about a month for made-to-order production, but since we maintain inventory of blocks of a certain size, we can offer immediate delivery within the range of applicable sizes! *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Special Steel

Our company realizes short delivery times even for a wide variety of small lots due to the large selection of steel materials we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: TOP PLATE Gr.A Size: t12 (6+6) × 150 × 268 Processing Method: Special hardfacing on SS material Application: Used in areas with severe wear (hardened layer) ⇒ One side is SS, so wear resistance is low, but the opposite side has a strength of approximately HRC60-80. 【Benefits of Processing at Our Company】 ▼ Generally, hardfacing on thin plates is difficult... ▼ The amount of hardfacing can be changed to 3mm or 6mm, etc. *For procurement of metal processed products, contact "Ito Akisato Sangyo"!

• Other metal materials
• Processing Contract
• Special Steel

Our company realizes short delivery times even for small lots of various types of steel materials due to the wide range of products we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SM400A (Welded structural rolled steel) Size: Build H H8/12×200×200×4000 (with some hole processing) Processing Method: Laser cutting of steel plates + welding into H-shaped steel Application: Used as structural components for civil engineering and construction, such as columns, beams, foundation piles, and machinery products. 【Benefits of Processing at Our Company】 ▼ Due to the special materials, ready-made H steel is usually produced by manufacturers in units of 4 tons, 10 tons, etc. Delivery times also take 3 to 4 months or more. ⇒ As a steel supplier, we can cut out only the necessary amount from steel plates and weld them. This significantly reduces total costs and shortens delivery times to about one month. ▼ The processing size this time is small within the Build H range, so there are few vendors capable of handling this processing. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Special Steel

Our company realizes short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We can handle quantities starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SS400 Size: t9×25×80 Processing Method: Milling 6F + Drilling + Chamfering Application: Fasteners 【Benefits of Processing at Our Company】 ▼ With our inventory and machining equipment, we can achieve consistent production in-house. This enables significant reductions in delivery times. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Assembly Jig

Our company realizes short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We can handle quantities starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SS material channel steel Size: t5×50×100 Processing Method: Roll bending Application: Large structures and construction materials 【Benefits of Processing at Our Company】 ▼ As a steel supplier with inventory, we can achieve short delivery times even for special materials. ▼ Since material procurement and processing can be done consistently, there are significant cost advantages. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Steel

Our company realizes short delivery times even for small lots of various types of steel materials due to the wide range of materials we handle and our abundant inventory. We accept orders starting from just one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: FCD600 (ductile cast iron, spheroidal graphite cast iron) Size: φ500×228 Processing Method: Band saw cutting Application: For sliding surfaces and wheels, etc. 【Benefits of Processing at Our Company】 ▼ As a steel supplier with inventory, we can achieve short delivery times even for special materials. ▼ Since material procurement and processing can be done consistently, there are significant cost advantages. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Vehicle body parts

Our company realizes short delivery times even for small lots of various types of steel materials due to the wide variety of materials we handle and our abundant inventory. We accept orders starting from just one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: HARDOX400 Application: Used in areas with severe wear Size: t10×(Bottom φ780)×(Top 720×580)×670 Processing Method: Laser cutting, press bending (rounded corner bending) 【Benefits of Processing at Our Company】 ▼ We have a constant stock of wear-resistant steel due to our steel sales, allowing for immediate processing. ▼ We can handle laser and bending processing consistently, enabling short delivery times. ▼ We are capable of handling high-difficulty rounded corner bending. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Other machine elements
• Processing Contract

Our company realizes short delivery times even for small lots of various types of steel materials due to the wide variety of products we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: High manganese steel Application: Machine parts used in areas where magnetic influence is undesirable Size: t16×270×2100 Processing Method: Water jet 【Benefits of Processing at Our Company】 ▼ We can cut and deliver only the necessary amount ▼ A consistent response from material procurement to processing reduces the hassle of arranging procurement *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Other machine elements
• Processing Contract

Our company realizes short delivery times even for small lots of various types of steel materials due to the wide range of products we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SKD11 (alloy tool steel, die steel) Application: As a cutting tool for the tip of machinery Size: t9×30×35 Processing Method: Wire cutting 【Benefits of Processing at Our Company】 ▼ We can accommodate orders starting from one piece, allowing for small orders of only what is needed. ▼ There is no need to collect leftover materials, eliminating unnecessary inventory. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other machine elements
• Processing Contract

Our company achieves short delivery times even for small lots of various types of steel materials due to the wide range of products we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SNCM439 (Nickel-Chromium-Molybdenum Steel) Size: t80×320×400 Processing Method: In-house equipment 【Benefits of Processing at Our Company】 ▼ As it is a forged product made from nickel alloy (SNCM439), it has high hardness and is difficult to cut. ▼ The cutting angles are acute, requiring considerable skill for processing. ⇒ Our company utilized years of expertise to provide a quick response with short delivery times. ▼ Processing is cheaper and faster than wire cutting. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Other machine elements
• Processing Contract

Our company achieves short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: HARDOX500 Application: Used in areas with severe wear Size: t30×540×2000 Processing Method: Cutting, bending, drilling Φ25 holes (approximately 500 pieces) 【Benefits of Processing at Our Company】 ▼ We also sell steel materials, so we always have wear-resistant steel in stock and can process it immediately. ▼ We can handle laser and bending processing consistently, enabling short delivery times. ▼ HARDOX500 has a very high hardness, making bending difficult, but we can accommodate it if the radius is gentle. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Other machine elements
• Processing Contract

Our company realizes short delivery times even for small lots of various types of steel materials due to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SS400 (General Structural Rolled Steel) Application: Processed Sample Product Size: 30×30×50 Processing Method: MC Processing (Machining Center) 【Benefits of Processing at Our Company】 ▼ By adding a little extra work to the materials before delivery, we can reduce the number of setup changes for our customers and minimize their workload. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Machining Center

Our company realizes short delivery times even for a wide variety of small lot orders due to the large selection of steel materials we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: HARDOX600/Pre-hardened Steel (HRC57) Size: t20×150 Processing Method: 6-sided milling (6F) 【Benefits of This Processing at Our Company】 ▼ Capable of handling ultra-high hardness HARDOX600 with our unique MC processing machine specialized for high rigidity ▼ Achieves ultra-short delivery times by using pre-hardened steel, eliminating the need for heat treatment ▼ The material has an HRC of about 57, allowing for processing *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Processing Contract
• Press Dies
• Processing Jig

Our company achieves short delivery times even for small lots of various types of steel materials, thanks to our wide range of products and abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: SM490A (Welded structural rolled steel) Application: Buildings and structures Size: t25×468×620 Processing Method: Beveling 【Benefits of Processing at Our Company】 ▼ By using specialized machines for beveling instead of grinders, we reduce delivery times and lessen the burden on workers. ▼ Since welding can be done immediately, it eliminates extra steps on-site and improves work efficiency. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Special Processing Machinery

Our company realizes short delivery times even for small lots of various types of steel materials due to the wide variety of products we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: DOCOL450 (wear-resistant steel and Haradox thin plate) Application: As cushioning material or protective cover for parts subject to severe wear Size: t1×500×800 Processing Method: Laser processing 【Benefits of Processing at Our Company】 ▼ We have the rare material itself and can handle processing, enabling short delivery times. ▼ By incorporating it as a protective cover or cushioning material rather than as part of the main machine, we can extend product life at a low cost. ▼ The material has a hardness of approximately HRC43-47 without heat treatment, making it difficult to process. *For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Other machine elements
• Processing Contract

Our company realizes short delivery times even for a wide variety of small lot orders, thanks to the extensive range of steel materials we handle and our abundant inventory. We accept orders starting from one piece, including bending, drilling, milling, laser cutting, gas cutting, water jet cutting, and BTA processing. 【Processing Example】 Material: STRENX700 Application: For parts requiring higher strength than general structural steel (H-beams, L-beams) Size: t9×60×60×5000 Processing Method: Laser cutting, bending 【Benefits of Processing at Our Company】 ▼ Since we can handle everything from materials to processing in-house, managing arrangements and progress is very easy. * As STRENX is only distributed as raw material, there are not many places that can provide a consistent response all the way to processing. * For procurement of metal processed products, contact "Ito Akira Sangyo"!

• Other metal materials
• Processing Contract
• Other processing machines

Excellent wear resistance extends the lifespan of machinery, reduces weight, and lowers maintenance costs. It is hard yet resilient, and can be welded using standard methods, making it widely used in various fields.

• Steel

We handle various steel grades such as S10C, S55C, SNC, SCR, SCM, SK, SKS, SKD, and more. We also have Swedish steel, bainitic steel, and gauge steel plates available. If you're looking for a specific type of steel, please feel free to contact us. We also offer services such as cutting, bending, and BTA processing.

• Special Steel

This is a bent product made of wear-resistant steel plate called Hardox. We can also perform drilling. Please send us the drawings. We will provide a quote.

• Special Steel
• Steel
• Other metal materials

Bending processed product of stainless steel (SUS304) square bar.

• stainless

This is a STRENX 700E high-strength 80 kg steel plate. It is a bent product measuring 9x60x90x4000 (mm). The bent part has an R shape.

• Steel
• Special Steel
• Other metal materials

This is a wire-cut product made from HSS (SKH), designed for cutting pipes. The customer brought a handwritten drawing requesting us to make it because the ready-made products were too expensive. We processed it at our company.

• Steel
• Special Steel
• Other metal materials

SS round bar bending and threaded machining products

• Steel
• Special Steel
• Other metal materials

We can accommodate angled cuts from various angles. The cutting will be done with a band saw. Please consult us regarding square bars, round rods, general steel materials, square pipes, and more.

• Steel
• Special Steel
• Other metal materials

S45C pipe diagonal cutting products We accommodate various diagonal cuts. The cutting is done with a band saw. It is faster than wire cutting and reduces costs.

• Steel
• Special Steel
• Other metal materials

S50C is a special cutting product. It allows for cost reduction and effective use of materials by shortening machining time and delivery time, as well as reusing leftover materials. Since it is cut with a band saw, it is cheaper and has a faster delivery time compared to wire cutting.

• Steel
• Special Steel
• Other metal materials

Copper pipe, angled cut product All angled cuts are made with a band saw. Shortened delivery time and cost reduction compared to wire cutting.

• Special Steel
• Other metal materials
• Non-ferrous metals

We can handle cutting products such as special steel round bars, plate materials, angles, channels, H-beams, and square pipes, from single pieces to thousands of mass-produced items. We also have circular saws, ensuring clean cutting surfaces and quick delivery! Our strength lies in our meticulous responsiveness. Of course, feel free to consult us for processing, even for just one piece.

• Special Steel

NM13Mn is a high manganese steel that becomes strong and hard when subjected to impact. It can also be welded. In that case, it is recommended to use a dedicated welding rod to ensure that the welded areas are of equal quality.

• Steel
• Special Steel
• Other industrial robots

Beveling is a process that is always applied at welding points where strength is required. By widening the contact surface between components and adding material, the strength of the joint surface increases, making the structure more robust. Our company can perform beveling not only on SS400 but also on SM and SN materials commonly used at construction sites, allowing us to deliver them ready for use. This reduces the extra work on-site, contributing to a shorter construction period.

• Steel

HARDOX 600 is a wear-resistant steel plate. It has a hardness of around HRC 58 and can be welded normally. It can be used as is without heat treatment. Until now, it has been used for construction machinery attachments and mixer blades, but recently its use in machine parts has also increased. The other day, a mold manufacturer mentioned that they are currently using SK and SKD with jigs between the molds and their machines, but the heat treatment costs for SK and SKD are high, and there are issues with distortion. I suggested they try HARDOX 600, and they expressed interest in using it. HARDOX 600 excels in wear resistance, and there are a total of four types: HARDOX 500, 450, 400, and 600. The thickness starts from 3.2 mm. It can be processed in various ways, including bending, tapping, drilling, countersinking, and milling, so why not give it a try?

• Steel