テクノ昭和 Product Lineup

The "TSL43S" from Techno Showa is a linear actuator with a built-in limit switch type DC motor. There are various basic motor speeds available, allowing you to achieve your desired torque and speed through gear reduction. It can be used for damper opening and closing, window and door opening and closing, transport equipment, and various automatic machines. 【Features】 - Automatic stop with built-in limit switch - Capable of extension and contraction like a DC motor - Various types of basic motor speeds available - Long-life type capable of 1 million cycles (consultation required) - Suitable for opening and closing dampers, windows, and doors *For more details, please refer to the PDF materials or feel free to contact us.

• Actuator

A simple position control AC motor with angle control, equipped with a control board inside the gear case. 【Features】 ○ The MAG type has a built-in limit switch for ON-OFF control with 90° rotation. ○ The PAG type has a built-in potentiometer, allowing position signals to be extracted for external control. ● For other functions and details, please download the catalog.

• Generators and transmission motors

High Torque Type DC Geared Motor 【Product List】 ○ TSD-1225BG (Rated Voltage: 12V) ○ TSD-1225CG (Rated Voltage: 12V) ○ TSD-2427BG (Rated Voltage: 24V) ○ TSD-2427CG (Rated Voltage: 24V) ● For other features and details, please download the catalog.

• Generators and transmission motors

DC Thin Gear Motor with Reduced Noise and Cost 【Features】 ○ A type that reduces the cost of the 25SSG and minimizes rotational noise ○ Capable of accommodating small quantities of other varieties, with a wide range of motor types ○ Position holding is possible due to the use of a worm gear ● For other functions and details, please download the catalog.

• Generators and transmission motors

DC geared motor equipped with a reducer and motor, designed to be low-cost and compact. 【Features】 ○ Abundant rotation speeds ○ Long lifespan ○ Various voltage options available ○ Low compact design ● For other functions and details, please download the catalog.

• Generators and transmission motors

【Features】 - Equipped with a reducer and motor in a thickness of 16mm, designed to be compact and high-torque. - For ratios from 17:1 to 270:1 at 16mm, please use "TSD18SPG" for higher ratios. - The shaft can be selected to be front-facing for 1230A or rear-facing for 1230B. *For more details, please contact us.*

• Generators and transmission motors

【Features】 - This motor is optimal for applications that require constant speed, as it rotates in sync with the frequency of general commercial power supply. - It has a long lifespan due to its low rotation speed. - Thanks to the magnetic rotor, it can start, stop, and reverse direction instantly. - Even if the motor is locked, it will not suffer from burning out. - It is available in various voltages and offers a wide range of reduction ratios. *For more details, please contact us.

• Generators and transmission motors

【Features】 - Equipped with a reducer and motor in a thickness of 18mm, designed to be compact and high-torque. - For ratios from 17:1 to 270:1 at 18mm, please use "TSD18SPG" for higher ratios. - You can choose either front output for 1230A or rear output for 1230B. *For more details, please contact us.*

• Generators and transmission motors

【Features】 - Equipped with a reducer and motor in a thickness of 16mm, designed to be compact and high-torque. - For ratios from 17:1 to 270:1 at 16mm, please use "TSD18SPG" for higher ratios. - You can choose either front output for 1230A or rear output for 1230B. *For more details, please contact us.

• Generators and transmission motors

Synchronized rotation with the frequency of general power supply AC synchronous motor usable with wide voltage range 【Features】 ○ Long lifespan due to low rotation speed of the motor ○ Instant start, stop, forward, and reverse possible due to the magnetic rotor ○ No burning out of the motor even if it is locked ○ Available in various voltages with a rich selection of reduction ratios ● For other functions and details, please download the catalog.

• Generators and transmission motors

Synchronized rotation with the frequency of general commercial power supply An AC synchronous motor ideal for applications requiring constant speed rotation 【Features】 ○ Long lifespan due to low rotation of the motor ○ Instant start, stop, forward, and reverse possible due to the magnetic rotor ○ No motor burnout even when the motor is locked ○ Available in various voltages with a rich selection of reduction ratios ○ For reinforcement of AG type gears ● For other functions and details, please download the catalog.

• Generators and transmission motors

Highly responsive CG gear-equipped inner rotor 【Features】 ○ Long lifespan with built-in brushless motor ○ Excellent response performance for forward, reverse, and stop with inner rotor ○ Compact and high-torque motor ● For other functions and details, please download the catalog.

• Generators and transmission motors

A DC geared motor equipped with a reduction gear and motor, designed to be low-cost and compact, with a 45-degree gear case. 【Features】 ○ Abundant rotation speeds ○ Long lifespan ○ Various voltage options available ○ Same characteristics as the CG type, but with a different mounting shape ● For other functions and details, please download the catalog.

• Generators and transmission motors

Low-voltage DC geared motor designed with a gearbox and motor, compact and low-cost. 【Features】 ○ Low voltage type ○ Abundant rotation speeds, long lifespan ○ Voltage can be from 1.5V battery ○ Low compact design ● For other functions and details, please download the catalog.

• Generators and transmission motors

Install a position sensor (potentiometer) on the output shaft DC thin-profile geared motor optimal for shaft control 【Features】 ○ Abundant rotation speeds and long lifespan ○ Available in Type A and Type B 　・ Type A is a general type that can accommodate small quantities 　・ Type B is limited to specific motor models, making it excellent for cost-effective mass production ○ Each shaft pin uses oil-free metal for long lifespan ● For other functions and details, please download the catalog.

• Generators and transmission motors

Uses a high-torque type motor TSM42-12P AC synchronous motor with compact, lightweight, high-torque gear 【Features】 ○ Equipped with a reduction gear that can fully utilize the motor's torque and withstand high torque ○ The reduction gear uses oil-less metal on all gear shafts, achieving long life ○ No motor burnout even if the motor is locked ○ Available in various voltages with a rich selection of reduction ratios ○ The exterior is made of VO specification resin, which is lightweight and has excellent heat resistance ○ The mounting screw area has metal inserts for durability ● For other functions and details, please download the catalog.

• Generators and transmission motors

A geared motor with an electromagnetic clutch built into a conventional AC synchronous motor. 【Features】 ○ A clutch is attached to the 18P, allowing the output shaft to be manually rotated from the outside when the clutch is OFF. ○ While taking advantage of the benefits of the magnetic rotor, it is possible to rotate from the outside with a force of 1/10 of the output torque on the output shaft side. ○ Various applications can be utilized by engaging and disengaging the clutch. ● For other functions and details, please download the catalog.

• Generators and transmission motors

Lightweight High Torque Type DC Geared Motor 【Features】 ○ Uses a resin case with a metal insert at the mounting part for lightweight design ○ Employs oil-free metal on the upper and lower gear shaft to prevent gear seizure and ensure long lifespan ○ Utilizes metal-cut gears to withstand high torque ● For other functions and details, please download the catalog.

• Generators and transmission motors

High Torque Inner Rotor Type DC Brushless Motor 【Features】 ○ Long lifespan with built-in brushless motor ○ Excellent response performance for forward, reverse, and stop with inner rotor ○ Compact high torque motor ● For other functions and details, please download the catalog.

• Generators and transmission motors

A DC thin geared motor designed to be compact and high-torque, equipped with a reducer and motor with a thickness of 25mm. 【Features】 ○ Suitable for mass production with specific motor models, offering excellent cost and performance. ○ Available in a wide range of speeds, long lifespan, and optional potentiometer. ○ General type that can accommodate small quantities. ○ Capable of position holding due to the use of a worm gear in the middle. ○ Each shaft pin uses oil-less metal for durability and long lifespan. ● For other functions and details, please download the catalog.

• Generators and transmission motors

Equipped with a reducer and motor for a 37φ gear case, this DC geared motor is designed to be low-cost and compact. 【Features】 ○ Abundant rotation speeds ○ Long lifespan ○ Various voltage options available ● For other functions and details, please download the catalog.

• Generators and transmission motors

It is small yet provides high torque. The rotation angle can be confirmed from the outside, and it offers a rich variety of reduction ratios to achieve the desired speed. There is also a type that allows for easy rotation of the output shaft from the outside with a manual clutch in an AC synchronous configuration.

• air conditioning

【Features】 - Equipped with a reducer and motor in a thickness of 18mm, designed to be compact and high-torque. - For ratios from 17:1 to 270:1 at 18mm, please use "TSD18SPG" for higher ratios. - You can choose either front output for 1230A or rear output for 1230B. *For more details, please contact us.*

• Generators and transmission motors

TSD25QSS...A Type The sound has been muted. Position holding is possible with the built-in warm feature. ★For more details, please refer to the catalog.

• Power Transmission Equipment
• Generators and transmission motors
• Other FA equipment

The motor and gearhead are housed within a thickness of 25 mm, using metal gears to achieve high torque, and oil-free metal is employed for the gear shaft to ensure long lifespan.

• DC Motor

A DC thin geared motor designed to be compact and high-torque, equipped with a reducer and motor with a thickness of 25mm. 【Features】 ○ Abundant rotation speeds, long lifespan, and optional potentiometer ○ General type that can accommodate small quantities ○ Position holding is possible due to the use of a worm gear in the middle ○ Oil-less metal is used for the upper and lower parts of each axis pin, ensuring long lifespan ● For other functions and details, please download the catalog.

• Generators and transmission motors

Install a position sensor (potentiometer) on the output shaft A DC slim geared motor optimal for shaft control 【Features】 ○ Abundant rotation speeds and long lifespan ○ Available in Type A and Type B - Type A is a general type that can accommodate small quantities - Type B is limited to specific motor models, making it excellent for cost-effective mass production ○ Each shaft pin uses oil-free metal for extended durability ● For other functions and details, please download the catalog.

• Generators and transmission motors

【Features】 - Built-in type with DC motor, limit switch, and relay - Various basic motor speeds are available, allowing you to achieve your desired torque and speed through gear reduction - Available with built-in short brake - Stroke and speed are available separately *Please contact us for more details.

• Power Transmission Equipment
• Actuator