トーニック List of Products and Services

The "QB Series Adhesive Wind Speed Probe" is a small, adhesive, horizontally omnidirectional probe that is smaller than electronic components on a circuit board. It is used in conjunction with our anemometer to measure wind speed and temperature in the "gaps" during product development of electronic devices and other products. With a measurement range of 0.1 m/s to 10 m/s or 0.3 m/s to 30 m/s, it offers high precision with an accuracy of ±3% of the indicated value. It excels in performance evaluation of production equipment and automotive parts, as well as in the analysis and verification of thermal measures, heat dissipation, and cooling methods. 【Features】 ■ The wind speed sensor is encapsulated in a φ2.5mm aluminum sphere made of single crystal semiconductor germanium, with a minimum height of 5mm, making it ultra-compact. ■ The anemometer is available in a 1-channel type, a 4-channel simultaneous measurement type, and a multi-channel type with 16 channels in one unit. ■ The probe cable length is 3m (extension cable available). ■ Installation is easy with double-sided tape or similar methods. *For more details, please refer to the catalog or feel free to contact us.

• Wind Speed/Volume Meter
• Ventilation and Exhaust

The duct meter "DMS-N1A" is a wind speed and temperature detection system that installs wind speed and temperature probes in factory supply and exhaust ducts and equipment, allowing for monitoring of airflow through an indicator and enabling analog output of airflow values. Traditionally, operators would visit measurement points to measure and record wind speeds at various locations, but the "DMS-N1A" can continuously measure airflow 24 hours a day, 365 days a year. There are also wind speed and temperature probes with chemical resistance that can monitor exhaust airflow in semiconductor factories, pharmaceutical factories, and research facilities over long periods. 【Features】 - Wind speed detection range: 0.1 m/s to 15 m/s; temperature range for wind speed detection: -10°C to 50°C - Easy to set airflow scale, cross-sectional area, units, etc.! - Wind speed and temperature sensors are compatible and easy to maintain. *For more details, please download the catalog or feel free to contact us.

• Weighing Control
• Piping Materials
• Voltage Meter

It can simultaneously measure the temperature and wind speed of airflow in indoor and factory spaces. The TempPlan ultra-multi-channel data logging system can connect hundreds of temperature sensors with a single input signal cable, allowing for reduced wiring compared to thermocouple types, and it also has better noise resistance compared to analog signals. Wind speed measurement can be performed using the ultra-compact adhesive-type wind speed and temperature probe, with the GeZ200 series multi-point wind speed measurement system enabling detailed wind speed distribution measurements. The measured wind speed and temperature data can be displayed in 3D spatial visualization software, allowing for numerical data as well as 2D (surface distribution) and 3D (spatial distribution) displays on a PC. By visualizing the temperature and wind speed in the space, it creates time-saving effects for analysis and evaluation reports. 【Features】 ■ Simultaneous measurement of temperature and wind speed of airflow in space ■ Hundreds of temperature sensors can be connected with a single input signal cable ■ Time-saving effects for analysis and evaluation reports *For more details, please download the materials or contact us.

• Temperature and humidity measuring instruments
• Wind Speed/Volume Meter

A high-temperature type of ultra-compact adhesive wind speed and temperature probe has been introduced. It is a multi-point wind speed measurement system that will be very useful for measuring wind speed distribution in engine compartments and analyzing the cooling effects of fans in electronic devices! It is suitable for thermal design, cooling effect analysis, and validating simulation results! 【Features】 ● Capable of measuring wind speeds up to 30 m/s within a temperature range of 0°C to 120°C ● Supports simultaneous multi-point wind speed distribution measurement with 16 channels *For more details, please contact us or refer to the catalog.

• Wind Speed/Volume Meter
• Ventilation and Exhaust

The "MONITOR-N" is an analog wind speed and temperature converter that outputs a non-linear voltage of DC 1.0V to 9.5V for wind speeds of 0 to 30 m/s and DC 0.8V to 9.0V for wind temperatures of 0 to 50°C. By programming the conversion formulas into a data logger or similar device, wind speed measurements can be easily obtained. It weighs 390g, is compact and lightweight, and is low-cost. This product can be used in combination with a wind speed and temperature probe. 【Features】 ■ Choose one of three wind speed ranges according to the measurement target's wind speed range ■ Easy wind speed measurement ■ Low-cost ■ Compact and lightweight ■ An optional power supply unit "MON-15V" is available to convert AC 100V to DC ±15V *For more details, please feel free to contact us.

• Wind Speed/Volume Meter
• air conditioning
• Reflow Equipment

The "Thermal Type Ultra-Compact Adhesive Wind Speed and Temperature Probe" is highly accurate, with an indication value of ±3% ±0.1m/s in the range of wind speeds from 0.1 to 10 m/s or 0.3 m/s to 30 m/s when used with the Tonic anemometer. Each probe can be attached to the desired measurement point using tape on its base. No mounting fixtures are required. Additionally, the "QB-5" has a height of just 5mm from the base, making it suitable for verifying airflow and wind speed distribution within equipment enclosures. When combined with a multi-point wind speed measurement and output unit, it can accurately measure wind speed distribution at up to 256 points. 【Features】 ■ Thermal type ultra-compact ■ High precision ■ No mounting fixtures required ■ Multi-channel anemometers also available *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices
• Thermo-fluid analysis
• Printed Circuit Board

We would like to introduce the "High-Temperature Multi-Point Anemometer / Ultra-Compact Adhesive Anemometer and Temperature Probe" handled by Tonic, which manufactures and sells anemometers, airflow meters, and wind speed sensors. We have made it possible to conduct thermal design, cooling effect analysis, simulation result verification, and wind speed distribution measurement in narrow gaps, which we previously thought was impossible. Using the high-temperature adhesive anemometer and temperature probe, we offer a high-temperature multi-point anemometer measurement system "PtY-160DA" capable of simultaneous measurement of up to 16 channels, along with models such as "PtY-10DA/40DA." 【Features】 <PtY-160DA> ■ Capable of simultaneous measurement of up to 16 channels ■ Wide measurement range: wind speed from 0.2 to 30 m/s, wind temperature from 0 to 120℃ ■ Equipped with an RS232C port on the main unit ■ Wind speed and temperature for specified channels can be displayed on the main unit ■ By using monitoring software for multi-point anemometers, monitoring and logging on a PC is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Wind Speed/Volume Meter
• Ventilation and Exhaust

Introducing the "High-Temperature Anemometer/Adhesive Type Wind Speed and Temperature Probe" handled by Tonic, which manufactures and sells anemometers, airflow meters, and wind speed sensors. We have made it possible to conduct thermal cooling analysis and simulation validation that we thought were impossible, as well as measure wind speed distribution in narrow gaps. Using the adhesive type wind speed and temperature probe, we offer a lineup including the high-temperature digital 4-channel anemometer "PtY-40DA," which allows simultaneous measurement of up to 4 channels, as well as the "PtY-10DA." 【Features】 <PtY-40DA> ■ Simultaneous measurement of up to 4 channels ■ Wide measurement range: wind speed from 0.2 to 30 m/s, wind temperature from 0 to 120℃ ■ Equipped with an RS232C port on the main unit ■ By using multi-point wind speed measurement software, monitoring and logging on a PC are also possible ■ Measurement values can be saved as text files *For more details, please refer to the PDF document or feel free to contact us.

• Analytical Equipment and Devices
• air conditioning
• Wind Speed/Volume Meter

The Tonic anemometer uses semiconductor germanium in its wind speed sensor. Unlike metals, semiconductors experience a sharp decrease in electrical resistance as temperature rises. This characteristic is utilized in Tonic's wind speed sensor. The anemometer catalog introduces various products, including adhesive-type wind speed and temperature probes, support rod-type wind speed and temperature probes, multi-point wind speed and temperature measurement systems, and digital wind speed and temperature meters. For more details, please contact us or download the catalog.

• Wind Speed/Volume Meter

This catalog is published by Tonic, which manufactures and sells anemometers, air volume meters, and wind speed sensors. It features duct-mounted air volume detectors such as the "DMS-N1/NH1," as well as wind speed and air volume detectors like the "DME-1" and "dMS-5SFT." 【Featured Products】 ■ Duct-mounted air volume detectors ■ Duct-mounted wind speed and temperature detectors ■ Wind speed and air volume sensors for air conditioning ducts ■ Wind speed switches ■ Multi-point wind speed measurement systems for research and development *For more details, please refer to the PDF document or feel free to contact us.

• Wind Speed/Volume Meter

This catalog is published by Tonic, which manufactures and sells anemometers, air volume meters, and wind speed sensors. It features the omnidirectional probe "QB・QA series," which encapsulates a single crystal germanium semiconductor in a Φ2.5mm aluminum sphere, as well as anemometers such as "GeZ-200D・GeZ-200DA." Additionally, we introduce the operating principles and calibration systems of Tonic anemometers. 【Featured Products】 ■ Adhesive-type wind speed and temperature probe ■ Support rod-type wind speed and temperature probe ■ Multi-point wind speed and temperature measurement system ■ Digital wind speed and temperature meter ■ Analog wind speed and temperature converter *For more details, please refer to the PDF document or feel free to contact us.

• Temperature and humidity measuring instruments
• Analytical Equipment and Devices

This is a thermal air velocity detection switch that detects the airflow inside ducts and devices, and turns the relay contacts ON/OFF when the set wind speed is detected. Since it can be permanently installed in the duct, stable wind speed and air volume can always be obtained. Additionally, due to its relay output, automatic control of fans and dampers can be easily achieved by connecting it to control devices such as PLCs.

• air conditioning

The Duct Meter DMS-N1 series is a wind speed and temperature detection system that installs wind speed and temperature probes in factory supply and exhaust ducts or equipment, allowing for monitoring of air volume via an indicator and enabling analog output of air volume values. Traditionally, handheld anemometers were used, requiring operators to go to measurement points, insert wind speed probes into ducts, measure and record wind speeds at various points, and calculate air volume. However, the DMS-N1 can continuously measure air volume 24 hours a day, 365 days a year. In addition to sensors for general air, there are also wind speed and temperature probes with chemical resistance that can monitor exhaust air volume in semiconductor factories, pharmaceutical factories, and research facilities over long periods.

• Weighing Control
• Piping Materials
• Voltage Meter

A new cut-base type has been introduced for the ultra-compact adhesive wind speed and temperature probe "QB Series." The base of Φ7mm (QB-5) has been further reduced in size to an oval type measuring 4mm in width and 5.5mm in length. With the calibration of the conventional anemometer body, high-precision wind speed measurements are possible. It can be used for various applications, including wind speed measurements in narrow spaces that were previously given up on, multi-point wind speed distribution measurements, and thermal cooling analysis in product development. 【Features】 ■ Ultra-compact ■ Cut-base type ■ High-precision wind speed measurement possible ■ Usable for various applications *For more details, please refer to the PDF document or feel free to contact us.

• Temperature and humidity measuring instruments
• Analytical Equipment and Devices

● The wind speed distribution of the air passing through the radiator and the wind speed distribution inside the engine room can be measured at up to 256 points. The wind speed measurement range is from 0.2 m/s to 30 m/s, measured with sensors and a multi-point wind speed output unit. (Temperature range is from 0°C to 120°C) ● The sensor unit can accommodate a thermal wind speed sensor and a wind temperature sensor in a stainless steel case. It can also be easily installed at measurement points within the engine room. ● By arranging ultra-compact wind speed and wind temperature sensors, the resistance is smaller compared to conventional propeller types, allowing for the measurement of wind speed and temperature distribution of the airflow passing over the radiator surface. Additionally, our products are manufactured and calibrated domestically (in-house), enabling quick responses for repairs and recalibrations. ● The calibration of the sensors is performed with the sensors placed in the case using our calibrated wind tunnel and a traceable calibration system, ensuring high-precision measurements. This multi-point wind speed and temperature measurement system is highly reliable in terms of reproducibility and is designed for the automotive industry. *For more details, please download the materials or contact us.

• Wind Speed/Volume Meter

Rectifying grid and short duct with wire mesh combined with the Tonic multi-point wind speed measurement system allows for airflow measurement in accordance with JIS8330 "Testing and Inspection Methods for Fans." The "GeZ-200D/DA" is a system capable of multi-point measurement of wind speed and temperature with up to 16 channels per output unit. It is useful for experiments and analyses that require more accurate airflow measurements. Please feel free to inquire about duct sizes and types. 【Features】 ■ Safe with fixtures designed for maintenance ■ Wind speed measurement range: selectable from two ranges of 0.1m/s to 10m/s and 0.3m/s to 30m/s ■ Wind speed measurement temperature range: 0℃ to 50℃ (must not condense) ■ Measurement target: clean airflow (general air) ■ Maximum number of wind speed measurement points: 256 points *For more details, please feel free to contact us.

• Wind Speed/Volume Meter
• Ventilation and Exhaust
• Other air conditioning equipment