マキシンコー List of Products and Services

Maxon, a top manufacturer of worm gear reducers, has added the "High Efficiency, High Reduction Ratio Type Two-Stage Worm Gear Reducer (MAH)" to its MA series, which combines years of experience with the latest technology. 【Features】 ● Compared to other mechanisms, the worm allows for smooth and quiet operation as all motion is transmitted through it. ● Shaft spacing: compatible with 50mm to 160mm ● Reduction ratio: 1/100 to 1/3600

This is a high-precision worm reducer with a backlash of 30 arc minutes or less, compatible with servo motors. 【Features】 (Comparison is with our standard products) ● Allowable torque increased by 60% ● Transmission efficiency improved by over 10% ● Overhang load increased by 80% ● Reduced rotational variation ● Low vibration due to slip rotation ● Backlash of 30 arc minutes or less

The high-precision worm reducer "MA Series Models 50 and 63" combines Maxinco's years of experience with the latest technological capabilities, resulting in the birth of a new product in the high-quality Makiease (M.A. Series)! The material uses an aluminum case, achieving a 50% weight reduction compared to the conventional Makiease. Workability has also improved, making it much easier to integrate into conveying equipment and machine tools. 【Features】 ■ Lightweight ⇒ The main case uses aluminum die casting, achieving a 45% weight reduction compared to the conventional (cast iron) model! Moreover, performance and strength remain unchanged. ■ Compact and high capacity ⇒ The surface area of the main case has increased by approximately 200%, significantly improving thermal rated capacity (compared to the conventional model). ■ Abundant variations ⇒ With a wide range of variations including output hollow, output solid, dual input shafts, and motor-equipped options, it meets all kinds of needs. *For more details, please download the catalog or contact us directly.

We have launched a new product that reduces the weight of cases and covers for our flagship MA series (50mm and 63mm types) from cast iron to aluminum, achieving approximately a 50% reduction in mass. As a result, we have expanded our aluminum series lineup to a total of five types, including the existing compact models (25mm to 40mm). <Recommended for> ■ Those facing challenges with installation work. ■ Those looking to streamline equipment design. <Improvement Benefits> By reducing weight while maintaining the same dimensions and shape: ○ We can meet the demand for replacements in existing equipment. ○ Incorporating into new equipment is easier due to the lightweight design. *For more details, please contact us or download the catalog for more information.

A warm helical reducer aimed at multi-field and multi-purpose applications.

A single-stage worm reducer that enables smooth and quiet operation compared to hypoid gears and helical gears due to its sliding transmission.

Areas for improvement and suggestions with our products: 1. Easy integration into new equipment 2. Can accommodate replacement needs for existing equipment due to lightweight design with the same dimensions and shape Significantly improved installation workability for each. Contributes to the efficiency of equipment design. *For more details, please contact us or download the catalog to view.*

Maxinko, a top manufacturer of worm gear reducers, utilizes "gear technology" based on high-level skills and know-how to develop and provide products with proven performance across a wide range of fields. The representative product, the worm gear reducer "MA Series," is characterized by high output, high efficiency, and compact lightweight design, allowing for quiet operation due to the features of worm gears. It has a maximum input rotational speed of 3000 rpm (for models MA50 and above) and has a wealth of proven performance with servo motor specifications. In the MA50.63 model, we have introduced the MAL series, which reduces the product's mass by up to 45% compared to conventional products by changing the main body material from cast iron to aluminum, enhancing our lineup. Additionally, our high-efficiency helical bevel gear, MCK, has received many inquiries from customers. Please feel free to contact us. 【Areas for Improvement and Suggestions with this Product】 1. Lightweight design makes integration into new equipment easier. 2. Same dimensions as existing products make replacement easy. *For more details, please contact us or download the catalog to view.

Products such as "reduction gears" and "jacks" are incorporated inside equipment. Currently, it is difficult to understand how they are actually used. In the "Maxinco Product Utilization Examples," we have compiled examples of the incorporation of Maxinco products, using photos of properties that can be publicly shared without issues. These are categorized into three sections: "Worm Reduction Gear," "Screw Jack," and "Bevel Gearbox." Additionally, our company has many more utilization examples beyond these. If you have any specific cases you are struggling with, please feel free to contact us. [Contents] ■ Worm Reduction Gear (6 applications) ■ Screw Jack (4 applications) ■ Bevel Gearbox (2 applications) *For more details, please refer to the PDF materials or feel free to contact us.

The "F・U Series" is a worm and helical reducer designed for space-saving due to its orthogonal axes. It has a characteristic that makes it difficult to reverse from the output shaft (self-locking). There is a wide variety including F, U, US, AF, and AOF models. The U and US types are integrated with the motor, featuring a compact design. There are solid and hollow types of output shafts, and the hollow type's output shaft cover is processed with an in-roll to simplify installation work. 【Features】 ■ Difficult to reverse from the output shaft (self-locking) ■ Space-saving design due to orthogonal axes ■ High reduction ratio (80 to 180) with orthogonal axes ■ Wide torque range from 208 to 56,600 N·m (F Series) *For more details, please refer to the PDF materials or feel free to contact us.

The "H Series" is a two-stage worm reduction gear that enables smooth and quiet operation. The BH, ABH, and AOBH types (lower worm type) have worm screws that are always immersed in lubricating oil, providing excellent lubrication conditions, making them particularly suitable for low-speed and high-load operations. The output shaft is positioned high, facilitating easy connection of equipment such as pulleys and sprockets with a large radius to the output shaft. The KH type, which has a vertical output shaft, uses bearings that are strong against thrust loads. 【Features】 - Enables smooth and quiet operation due to sliding transmission compared to hypoid gears and helical gears. - Characteristics that make it difficult for the output shaft to reverse (self-locking). - High reduction ratios available (100 to 3600). - Torque: 113 to 56,600 N·m. - A wide variety of models: BH, KH, AH, AOH. *For more details, please refer to the PDF document or feel free to contact us.

The "H-E Series" has been made available for a wider range of applications by setting a motor on the two-stage worm reducer "H Series." While it comes standard with E-type motors, we can also equip it with brake motors, outdoor type, explosion-proof type motors, etc., upon request. Due to its compact design, the installation area is minimized and economical. Additionally, the direction of the mounted motor can be changed vertically or horizontally according to your requirements. 【Features】 ■ Achieves a large reduction ratio, suitable for situations requiring slow rotation and high torque ■ The reducer uses standard products, ensuring quick delivery ■ Its compact design minimizes the installation area and is economical ■ The direction of the mounted motor can be changed vertically or horizontally upon request ■ Standard equipped with E-type motors ■ Can be equipped with brake motors, outdoor type, explosion-proof type motors, etc., upon order *For more details, please refer to the PDF document or feel free to contact us.

Compact, lightweight, and exceptionally quiet. It also contributes to energy-saving measures in facilities. 【Features of the Jack Products】 - Achieves high output and high efficiency while being compact and lightweight - Employs a worm gear for quiet operation - Power is used only during lifting and lowering, contributing to energy savings as constant power supply is unnecessary - Minimal risk of oil leakage, making it suitable for system upgrades - Rich in options and structures, making it applicable for replacement of hydraulic devices *For more details, please refer to the materials. Feel free to contact us with any inquiries.

You can select MA (Maki Ace) from our homepage. Before starting the selection process for MA (Maki Ace), please read the "Notes on the Selection Sheet." After confirming the items listed, check the box "I have confirmed the above notes" at the bottom of the external link page, and you can start the selection by clicking the "Start MA (Maki Ace) Selection" button. Depending on usage conditions, frequency of use, control programs, and other factors, it may be necessary to verify strength and other aspects, so please use it as a preliminary selection tool and consult your nearest sales office for the final selection. [Notes on the Selection Sheet (Excerpt)] ■ About the selection range - Series: Does not support MAF type and MAH type two-stage reducers - Model numbers: Selection is targeted for models from 50 to 160 ■ Other notes - Maki Ace does not have a self-locking effect - In cases of high load or harsh usage environments, it may not be selected *For more details, please refer to the external link page or feel free to contact us.

This catalog is a comprehensive catalog published by Maxinco Co., Ltd. It features a wide range of products, including the compact and high-capacity high-efficiency worm gear reducer "MAL series," precision planetary reducers, and screw jacks. At the beginning of the catalog, we have included the latest product application case photos, as well as detailed diagrams of the MA series parts, which have received many inquiries, and dimensional drawings of screw jacks categorized by type, all revised from the user's perspective. [Contents] ■ Worm Gear Reducers ■ Precision Planetary Reducers ■ Geared Motors ■ Screw Jacks ■ Cylinder Ace ■ Bevel Gearboxes ■ Differential Gearboxes ■ ROTEX Couplings *For more details, please refer to the PDF document or feel free to contact us.

Recently, machinery and equipment have increasingly become space-saving, and automation of machines has progressed, leading to a demand for high frequency. Shaft-mounted reducers and ball screw jacks are examples of such mechanical component parts. We are introducing new products such as shaft-mounted reducers that can be directly attached and ball screw jacks with high-frequency stop mechanisms! ◎ Helical Gear Shaft Mounted Reducer (SHAFT MOUNT DRIVE) This reducer can be directly attached to the driven shaft thanks to its hollow output shaft. 【Features】 ■ Direct attachment possible ■ Space-saving with no need for alignment ■ Rich variety of installation options ■ Increased capacity compared to our conventional products ◎ High-Frequency Ball Screw Jack By adopting a ball spline nut, we have achieved a product suitable for high-frequency operation even with a stop mechanism. 【Features】 ■ High-frequency compatible ■ Capable of supporting high-frequency operation ■ High lead specification for high-speed response ■ More compact design compared to equivalent products from other companies ■ Available in two types with load capacities of 5kN and 10kN (※) (※) For high-frequency applications with loads over 10kN, please consider our "Linear Ace" (load capacity 30kN). *For more details, please download the PDF or contact us.

The "helical gear shaft-mounted reducer" can be directly attached to the driven shaft due to its hollow output shaft, eliminating the need for alignment. This allows for a compact and simple mechanical device with direct mounting. Installation can be done in both horizontal and vertical orientations. Additionally, special adaptations are possible, so please consult us as needed. 【Features】 ■ Direct attachment to the driven shaft due to the hollow output shaft ■ No alignment required ■ Installation can be done in both horizontal and vertical orientations ■ Directly mounting to the mechanical device allows for a compact overall design ■ Special adaptations are possible *For more details, please refer to the PDF document or feel free to contact us.

The "Makiease MA Series" is a worm gear reducer that achieves high output and high efficiency through the length of engagement and sufficient tooth contact area, while also providing quiet operation through slip transmission. In the servo motor specification, it supports input rotational speeds of up to 3000 rpm, and it is also possible to manufacture with a servo motor adapter or with a servo motor included. It can be used in applications that require low backlash and precise positioning. 【Features】 ■ Lightweight and compact, allowing for space-saving installation ■ The allowable peak torque is supported by seven model numbers and eight types of reduction ratios, ranging from 46 to 1027 N·m (for an input rotational speed of 3000 rpm) ■ An aluminum cover type that achieves weight reduction is also available in the lineup *For more details, please refer to the product documentation available for download in PDF format. Feel free to contact us with any inquiries.

Maxinko, which has been manufacturing reliable gear transmission products that consolidate over 80 years of technology, offers design support services for automation and labor-saving devices. 【Are you facing any of these issues?】 ■ Want to output high torque with a small power source ■ Want to design machines with low vibration and noise ■ Want to consider mechanisms for branching and synchronizing power Maxinko's worm gear reducers can solve these problems. 【Features】 ■ High torque and high reduction worm gear reducers ■ Compared to hypoid gears and helical gears, they allow for smooth and quiet operation due to sliding transmission ■ A lineup of input dual-axis and output dual-axis types makes branching and synchronized operation mechanisms easy! With years of proven results and a wealth of experience, we can design and manufacture products that can be utilized in various power fields, leveraging our accumulated technology and know-how. *For more details, please download the PDF or contact us directly.

Maxinco products are incorporated into many solar panel-related devices. This time, we will explain Maxinco products that are integrated into solar energy equipment. Maxinco's technology is essential for smoothly moving solar panels. Please take a look at these technologies. 【Case Overview (Partial)】 ■ Gearbox Case - Used for angle adjustment to track the sun, as well as for rotating the entire solar panel placed on a rail. - Gearboxes are installed at the back or bottom of the panels, as shown in the case photos. ■ Jack Case - Used for the vertical movement of solar panels. - Adjusting the lifting method allows for tracking the sun. - As shown in the case photos, the tip of the jack's axis is connected to the panel's surface, pushing it. - Smooth movement is achieved through the motion of the screw. *For more details, please feel free to contact us.