Notice of the issuance of a flyer for "Air-powered equipment that can be safely used in fire-restricted areas."

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids in small quantities.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge ◎Discharge method can also be selected 《Benefits》 ●Minimal residual liquid (approximately 200cc), capable of efficient discharge ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Designed for discharge only with sealed pressurized drums, not for recovery ●Double pressure reduction with a regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of the Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

A pump that uses internal pressure with compressed air for transferring liquids, equipped with a solvent nozzle! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected 《Advantages》 ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Air Pressure Pump Mechanism》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to transfer liquids by utilizing internal pressure! It minimizes residual liquid, is energy-efficient, and is suitable for safely dispensing highly flammable liquids.

◎Explosion-proof design that does not use electricity ◎Double safety structure for peace of mind ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate ◎Efficient liquid discharge without waste ◎Discharge method can also be selected 《Advantages》 ●Minimal residual liquid (about 200cc), can discharge without waste ●Safe transfer of volatile and flammable liquids ●Quiet operation with a 1 horsepower compressor ●Low air consumption and energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Sealed pressurized drum for discharge only, not for recovery ●Double pressure reduction with regulator and safety valve for added safety ●Equipped with an anti-static grounding wire (only for G, AS, SUS types) 《Mechanism of Air Pressure Pump》 This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

Pump for kerosene, light oil, and gasoline with a gun nozzle! Utilizes internal pressure with compressed air for transfer! Minimizes residual liquid, energy-saving, and safely allows for portioning of highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for peace of mind ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to transfer liquids such as kerosene, light oil, and gasoline! It minimizes residual liquid, is energy-efficient, and safely dispenses highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable with small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, being air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to utilize internal pressure for transfer, equipped with an oil gun nozzle! Minimizes residual liquid, energy-saving, and suitable for safely dispensing highly flammable liquids in small quantities.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized drum for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and inhale liquid. Since there are no obstacles in the flow path, it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, because it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination is not acceptable.

• Other pumps

A pump that uses compressed air to transfer liquids by utilizing internal pressure! Minimizes residual liquid, energy-efficient, and suitable for safely dispensing highly flammable liquids.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Can be stored in a sealed manner ◎ Compatible with high-viscosity liquids ◎ Low failure rate ◎ Efficient liquid discharge without waste ◎ Discharge method can also be selected ≪Advantages≫ ● Minimal residual liquid (approximately 200cc), can discharge without waste ● Safe transfer of volatile and flammable liquids ● Quiet operation driven by a 1 horsepower compressor ● Low air consumption and energy-efficient ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ≪Features≫ ● Dedicated for JIS standard 200L closed drums (large cap G2) ● Sealed pressurized type for discharge only, not for recovery ● Double pressure reduction with regulator and safety valve for safety ● Equipped with an anti-static grounding wire (only for G, AS, SUS types) ≪Mechanism of Air Pressure Pump≫ This pump inserts depressurized compressed air into the drum, changing the internal pressure of the drum to discharge and draw in liquid. There are no obstacles in the flow path, so it can handle liquids with foreign matter contamination and viscosity (up to 3,000 cP) without failure. Additionally, since it is air-operated, it can be used with liquids and environments that pose a risk of ignition or explosion. *Flow meter and gun nozzle included; foreign matter contamination not allowed.

• Other pumps

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration).

**CHD Series** CHD-20HP (For Solvents) CHD-20HPV (For Solvents / With Ball Valve) CHD-20HPN (For Solvents / With Gun Nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For dispensing only **Replacing the Motor Head** The head part (motor part) can be easily detached and replaced, allowing for the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and the pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding the Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid dispensing. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are present inside the nozzle).*

• Other pumps

Pursuing reasonable prices! For the transfer of hydrogen peroxide (30% concentration) and nitric acid (30% concentration)! Electric chemical drum pump.

**CHD Series** CHD-20PP (for solvents) CHD-20PPV (for solvents / with ball valve) CHD-20PPN (for solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● For discharge only **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing for the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same manner to complete the replacement. **Regarding Ball Valve and Gun Nozzle** ● Ball Valve (V) By installing a ball valve, valve opening and closing operations are possible during liquid discharge. ● Gun Nozzle (N) Operable with one hand, allowing for opening and closing operations at hand, easy to install with just one screwdriver. *Note: Liquids that corrode stainless steel cannot be used (some SUS parts are inside the nozzle).*

• Other pumps

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a greater variety of compatible liquids compared to our previous model (CHD-20SUS)! Suitable for solvent transfer in chemical plants.

**CHD1 Series** CHD1-20SUS (for solvents) CHD1-20SUSV (for solvents / with ball valve) CHD1-20SUSN (for solvents / with gun nozzle) ● Continuous operation possible ● Lightweight and compact body ● Inexpensive **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Dedicated to JIS standard 200L closed drums (large plug G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 22L/min ● For discharge only **Applications** Not only in metal plating factories and semiconductor manufacturing, but also in chemical plants, pharmaceutical warehouses, and more. Additionally used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flame areas, please use the air-operated model (CHD1-20ASUSN). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Ethyl acetate ■ Butyl acetate ■ Hydrogen peroxide ■ Sodium hydroxide ■ Nitric acid (30% concentration)

• Other pumps

The liquid contact materials have been upgraded to SUS, PTFE, and FFKM, allowing for a wider range of compatible liquids compared to our previous model (CHD-20A)! Suitable for solvent transfer in areas where open flames are prohibited.

**CHD1 Series** CHD1-20ASUS (for solvents) CHD1-20ASUS-V (for solvents / with ball valve) CHD1-20ASUS-N (for solvents / with gun nozzle) ● Oil-free air motor type ● Lightweight and compact body ● Inexpensive **Features** ● Safe and secure due to air drive ● Dedicated for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Discharge rate of 20L/min (with nozzle) ● Discharge only **Applications** Used not only in metal plating factories and semiconductor manufacturing but also in chemical plants, pharmaceutical warehouses, and other sites. Additionally, it is used in water treatment, pharmaceuticals, laboratories, schools, and hospitals. For areas with high volatility, high flammability, explosion-proof zones, and no open flames, please use the air-operated model (CHD1-20ASUS-N). **Suitable for use in the following areas!** ■ Lithium batteries (secondary batteries) ■ Dyeing, semiconductor, disinfectant manufacturing, automotive, and electrical appliance factories ■ Surface treatment in metal plating factories ■ New energy sector **Compatible with the following liquids!** ■ Alcohol ■ Thinner ■ Acetone ■ Methanol ■ MEK, etc.

• Other pumps

Air-operated portable hand pump for solvents / pump unit and drum can, suitable for use in explosive areas.

ACH Series" ACH-20SUS (for solvents / pump only) ACHD-20SUS (for solvents / for drum cans) ◎ Explosion-proof design that does not use electricity ◎ Can be used without sealing the drum can ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air-driven operation, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Also available in a hose connection type for drum cans "How Centrifugal Pumps Work" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height difference, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• Other pumps

Air-operated portable hand pump for kerosene and light oil, suitable for use in explosive areas, with both ends for drum cans and hoses.

ACH Series" ACH-20AL (for kerosene and light oil / pump only) ACHD-20AL (for kerosene and light oil / for drums) ACHH-20AL (for kerosene and light oil / hose at both ends) ◎ Explosion-proof specification that does not use electricity ◎ Can be used without sealing the drum ◎ Customizable "Benefits" ● Recommended for circulating low-viscosity liquids ● Maximum discharge rate of 50L/min ● Safe due to air drive, with no risk of electric leakage ● Can be used as a circulation pump due to continuous operation capability "Features" ● Maximum lift height of 5m ● Spiral-type centrifugal pump ● Available in types for drums and hose connections "How Centrifugal Pumps Work" A centrifugal pump is suitable for drawing low-viscosity liquids with minimal height differences, utilizing the centrifugal force generated by a rapidly rotating impeller shaped like a spiral inside. It is also referred to as a "spiral pump.

• Other pumps

[For Solvents/Ball Valve with Gun Nozzle] For transferring alkaline solvents in areas where open flames are prohibited! An air-operated chemical drum pump designed with a focus on reasonable pricing.

**CHD Series** CHD-20AHP (For solvents) CHD-20AHPV (For solvents / with ball valve) CHD-20AHPN (For solvents / with gun nozzle) **Advantages** ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced **Features** ● Compliant with PSE (Product Safety of Electrical Appliances and Materials) for safety and security ● Designed specifically for JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● Air-operated, eliminating concerns about electric leakage ● Air motor type with high discharge volume, non-pulsating ● Designed exclusively for discharge **Replacement of Motor Head** The head part (motor part) can be easily detached and replaced, allowing the air motor type to be switched to an electric type. 1. Remove the four screws connecting the motor and pipe (pump part) with a screwdriver. 2. Reassemble in the same way to complete the replacement.

• Other pumps

A chemical pump that pursues reasonable pricing. For the transfer of dilute sulfuric acid and alkaline solvents in fire-restricted areas.

Chemical Pump 《CHD Series》 CHD-20APP (for solvents) CHD-20APPV (for solvents / with ball valve) CHD-20APPN (for solvents / with gun nozzle) CHD-20AHP (for solvents) CHD-20AHPV (for solvents / with ball valve) CHD-20AHPN (for solvents / with gun nozzle) 《Benefits》 ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume, non-pulsating ● Discharge only PSE (Electrical Appliance and Material Safety Law) compliant product PSE (Product Safety Law) compliant product, ensuring safety and security

• Other pumps

Hand-cranked pump that performs exceptionally well even in emergencies! Made of all stainless steel, perfect for dispensing organic solvents.

**HRD Series** HRD-25SUS (for solvents) HRD-25SUSH (for solvents / with hose) HRD-25SUSHM (for solvents / with hose, sealed adapter, and grounding wire) ◎ Hand-cranked pump that does not require a power source ◎ Can be widely used from household drums to factories ◎ Continuous pumping is possible ◎ Suction pipe can be cut **Benefits** ● Easy operation by simply turning the handle ● No power supply required ● Can dispense highly flammable organic solvents in small quantities ● Suitable for low-viscosity liquids (below 500 cP) with specific gravity (below 1.5) ● Safe for highly volatile liquids with sealed adapter (HRD-25SUSHM) ● Very useful in emergencies and disasters **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Equipped with a 40 mesh strainer to prevent foreign matter contamination ● Specifications can be selected according to the liquid *Note on stainless steel hose: Flexible hoses have a limited range of motion, and forcing them to bend may cause tearing.*

• Other pumps

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎Simple structure, no worries about breakdowns ◎Equipped with new features for greater convenience and easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For collection only (general oil, oils, metal shavings, etc.) ●Compatible with JIS standard 20L open pails (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no risk of failure ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-prone areas, no risk of ignition 《Features》 ● Designed for collection only (general oil, oils, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas of ships Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

A vacuum cleaner for collecting oil and metal shavings in a bucket. It is convenient for on-site cleaning as it can handle both dry and wet materials.

"APPQO Series" APPQO600S (For oil / Wet and dry use) APPQO600 (For oil / Wet and dry use) APPQO600-SET (For oil / Wet and dry use) APPQO600-TC200 (100/50) (For oil / Wet and dry use / Drum can specification *Drum can itself is not included) APPQO600-DTC200 (100/50) (For oil / Wet and dry use / Drum can specification) *Drum can specification (Top plate, Carry) ◎ Simple structure with no failures ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner with wet and dry capabilities ● Less prone to breaking compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition "Features" ● Dedicated for collection (general oil, oil, chips, etc.) ● JIS standard 20L open pail can (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• Industrial Vacuum Cleaners

A vacuum cleaner for collecting oil and metal shavings in a pail can. It is convenient for on-site cleaning as it is suitable for both dry and wet use.

《APPQO Series》 APPQO400S (For oil / Wet and dry use) APPQO400 (For oil / Wet and dry use) APPQO400G (For kerosene and light oil / Wet and dry use) APPQO400AS (For solvents / Wet and dry use) ◎ Simple structure with no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner for wet and dry use ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, lubricants, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (for top outer diameter of 300mm ±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 3 horsepower (2.25kw) or more

• Other pumps

Solvent / Wet and Dry Use: A vacuum cleaner that can collect solvents and metal shavings! Convenient for on-site cleaning due to its wet and dry capabilities.

◎ Simple structure, trouble-free ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump for wet and dry applications and a vacuum cleaner ● Less likely to break compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (recommended outer diameter of top 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting and cutting oil in metal processing Cleaning in shipyards and bilge areas of ships Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• Other pumps

[For kerosene and light oil / Wet and dry use] A vacuum cleaner that can collect kerosene and light oil! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater in septic tanks and pits Collection of welding spatter

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Easy to operate ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet/dry vacuum and an intake pump ● More durable compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no fire risk 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas of ships Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no breakdowns ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum and an intake pump ● Less prone to breaking compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For collection only (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pail (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 3 horsepower (2.25kw) or more 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter

• Other pumps

Collecting cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely suction volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for suction only, discharge not possible ●Equipped with an anti-static grounding wire *Only for G and AS ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge externally from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and sucks in external air 5. Liquid is suctioned from the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• Other pumps

Collecting cutting fluids, waste oil, and solvents such as kerosene, light oil, gasoline, IPA, methanol, and toluene in drums.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Safely suction volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for suction only, not for discharge ●Equipped with an anti-static grounding wire (for G and AS only) ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure, drawing in external air 5. Liquid is suctioned through the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping suction

• Other pumps

Collecting cutting fluids, waste oil, and solvents such as IPA, methanol, and toluene in drums.

◎Explosion-proof specification that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Benefits》 ●Safely suction volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Automatic stop when full ●Easy adapter installation (bag nut type) 《Features》 ●Dedicated to JIS standard 200L closed drums (large cap G2) ●Sealed negative pressure type for drum cans, suction only, no discharge ●Equipped with an anti-static grounding wire (only for G and AS) ●Built-in float ball for leak prevention 《Suction Mechanism》 1. Connect compressor air (air pressure 0.4 to 0.6 MPa) 2. Discharge outside from the ejector without entering the tank 3. Negative pressure is generated at the ejector, expelling air from the tank 4. The tank becomes negative pressure and draws in external air 5. Liquid is suctioned from the suction nozzle 6. When the liquid is full, the float ball blocks the air discharge port, stopping the suction

• Other pumps

Ideal for transferring liquids from drums for kerosene, light oil, and gasoline! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-use for suction and discharge ●Minimal residual liquid (approximately 200cc), efficient discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Includes grounding wire for static electricity prevention *Only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

Ideal for transferring liquids from oil drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual-purpose for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Equipped with an anti-static grounding wire *only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

Ideal for transferring liquids from solvent drums! Switching between discharge and suction is easy with just one lever.

◎Explosion-proof design that does not use electricity ◎Can be stored in a sealed manner ◎Compatible with high-viscosity liquids ◎Low failure rate 《Advantages》 ●Dual function for suction and discharge ●Minimal residual liquid (approximately 200cc), no waste in discharge ●Safe transfer of volatile and flammable liquids ●Cost-effective with low failure rates, reducing expenses ●Low air consumption, energy-saving ●Acceptable for small amounts of foreign matter contamination ●Continuous operation possible ●Easy adapter installation (bag nut type) 《Features》 ●Designed specifically for JIS standard 200L closed drums (large cap G2) ●Includes grounding wire for static electricity prevention *Only for G and AS ●Built-in float ball for leak prevention function

• Other pumps

No oil supply required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFG-18NL ◎ Equipped with a non-oil air motor ◎ Adjustable angle "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various models and sizes to choose from according to the usage location ● Stepless adjustment of rotation speed using the air valve throttle ● Stable construction that is difficult to topple ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-oil air motor ● Stable construction that is difficult to topple ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0 to 60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• air conditioning

No oil refilling is required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFK-18NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Wall-mounted "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various models and sizes to choose from based on usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function ● Equipped with a non-lubricated air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation in underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• Ventilation and Exhaust

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

On September 11, 2025, AC Tasarim, a cable blade manufacturer, and our company signed a sales agency agreement for Japan. This was also announced in the company's press release and on social media. Founded in Turkey in 2003, AC Tasarim manufactures flexible EMI cable shields (copper braid), polyester braid, meta-aramid braid (Nomex cable sleeves), flat copper braid busbars/ground braids, all AA59569-coded copper braids, and released AeroBraid in 2025, the world's lightest EMI braid. All manufactured copper braids are certified to military standards. AC Tasarim products hold key certifications including VDE/VG certification, German Federal Armed Forces certification, NATO NSN coding, AS9100 quality certification, and JOSCAR certification. Cable braids and EMI shielding products, essential for wire harnesses in the aerospace and defense industries, are becoming increasingly difficult to source as demand rises. TC Tasarim products are stocked by manufacturers and distributors to ensure quick response times.

Starting from September 22, 2025 (Monday), we will begin accepting orders for five new lineups tailored to various applications in the "N-SELECT" series of transport vehicles. In this new development, we will introduce the following five models that maintain the basic performance of the traditional N-SELECT while addressing more specialized needs: SC (Super Carrier) - Based on the traditional N-SELECT, this model is specialized for transporting immobile and accident vehicles. It is ideal for the automotive maintenance and towing industry. RC (Racing Carrier) - Designed with a gentle loading and unloading angle, this model is perfect for transporting sports cars and lowered vehicles. TP (Transporter) - A standard model optimized for the transportation of general passenger vehicles, suitable for a wide range of industries. ONE (Single Vehicle Loading Model) - A simple and efficient design dedicated to loading one vehicle. Recommended for small-scale transport and individual entrepreneurs. RS (Rescue) - A single vehicle loading model equipped with a crane, enhancing its capability to respond in accident scenes and tight spaces. With these lineups, N-SELECT evolves into a product group that meets a wider variety of on-site needs. We will continue to promote product development that reflects the voices from the field as the "preferred transport vehicle."