Spray drying contract and testing now accepting applications.

MMSD MDL-050: Supports everything from research and development to small-scale production! High-performance spray dryer.

GF Corporation's "MMSD Micro Mist Spray Dryer MDL-050(C)M" is our original spray drying device capable of instantly generating large quantities of liquid as fine particles of less than 10 microns. # Main Features of MDL-050(C)M - Generation of single micron fine powder The device employs a "four-fluid nozzle" that can spray the smallest droplet diameter in the industry, producing sharp particles of single microns (up to 10um). It is ideal for drying lithium-ion battery materials, poorly soluble compounds, and heat-sensitive components. - Efficient sample work through continuous operation It supports continuous operation, allowing for efficient handling of everything from small tests to large sample work. - Easy operation and high hygiene Operation is intuitive via a touch panel, and the operating status can be easily checked at a glance. Additionally, it has excellent sanitary properties, and disassembly and assembly are easy, making cleaning simple. - Selectable recovery methods The sample recovery methods can be switched between "single-point collection with a bag filter" and "two-point collection with a cyclone and bag filter," allowing you to choose according to your application.

• Drying Equipment
• Granulating Equipment
• Other powder equipment

MMSD MDL-015（C）MGC-S

GF Corporation's "MMSD Micro Mist Spray Dryer MDL-015 (C) MGC-S" is a small-scale spray drying device suitable for laboratories that can handle organic solvents. Among our original MMSD series, it particularly excels in validating small sample sizes by instantly generating liquids as fine particles of less than 10 microns. # Main Features of MDL-015 (C) MGC-S - Compatible with organic solvents Safe spray drying of organic solvents can be performed under a nitrogen atmosphere. It also accommodates low-boiling-point solvents, making it useful for a wide range of research and development. - Generation of single micron fine powders Equipped with a "four-fluid nozzle" that can spray the smallest droplet diameter in the industry, it produces sharp particles of single microns (up to 10um) in the dried powder. - Capable of experimental validation with small samples Suitable for validation on a small scale, allowing efficient experimentation even with small amounts of valuable samples.

• Drying Equipment
• Granulating Equipment
• Other powder equipment

Instantly generate particles smaller than 10 microns! Innovative powder manufacturing realized by GF's spray dryer.

The Micro Mist Spray Dryer "MMSD" is an innovative spray drying device that generates liquids into fine particles. With its unique nozzle technology, it can instantly and in large quantities produce particles smaller than 10 microns. It contributes to the micronization and powder manufacturing of various materials, including lithium-ion battery materials, poorly soluble compounds, and heat-sensitive components. ◇ Features - Capable of drying fine particles (submicron). - Can handle large samples with continuous operation. - Compatible with organic solvents. - A rich lineup from small-scale testing to mass production. ◇ Solving these challenges - Want to create powders with uniform particle size. - Want to efficiently dry heat-sensitive materials. - Need a device that can handle everything from small-scale prototypes to mass production. Please feel free to contact us!

• Drying Equipment
• Granulating Equipment
• Other powder equipment

Innovative powder manufacturing realized by MMSD (Micro Mist Spray Dryer)

●What is a spray dryer? A spray dryer is a device that converts liquid raw materials into fine powder. Specifically, it uses a nozzle to turn liquid raw materials such as solutions or suspensions into a fine mist. This mist is then brought into contact with a high-temperature gas (usually air), causing the liquid components, such as moisture, to evaporate instantly, resulting in dried fine powder. ●Why can it dry? When the liquid becomes a fine mist, the surface area increases dramatically. This increases the contact area with the high-temperature gas, allowing heat to be transferred efficiently, which causes moisture to evaporate instantly. Additionally, because the drying time is very short, even heat-sensitive materials can be dried at relatively low temperatures.

• Drying Equipment
• Granulating Equipment
• Other powder equipment

Into a world of single microns that overturns conventional wisdom.

In material development, have you ever felt that "if only it were a few microns smaller..."? The Micro Mist Spray Dryer (MMSD) is a drying device specialized for the "single micron" range of 1 to 10 μm. 【Three Reasons to Choose MMSD】 〇 Overwhelmingly fine particle size Achieves ultra-fine spraying with an average particle size of 5 μm through unique four-fluid nozzle technology. 〇 High recovery rate and reproducibility Minimizes recovery loss due to micronization, providing stable quality from lab to production scale. 〇 Supports drying at low temperatures The droplets are extremely small, allowing for instant drying. It also challenges materials that are sensitive to heat.

• Contract manufacturing
• Drying Equipment
• Granulating Equipment

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

***Contract Processing Now Accepting Orders*** We can accommodate small lots and a variety of sample tests, including spray drying with organic solvents. Please feel free to contact us. ----Example of a Prototype Schedule---- 9:30 Pre-test Meeting 10:00 Spray Drying Test Starts 12:00 Lunch Break 13:00 Spray Drying Test Resumes 16:00 Post-test Meeting

【Period: Ongoing until May 31, 2026】 Now 20% OFF! For orders of 10 or more: Dry T-shirts @ 1,600 yen (tax included) Dry polo shirts @ 2,000 yen (tax included) (Price includes the garment and one print location) * For sizes 3L and above, an additional 550 yen * An additional 550 yen for each additional print location Design and data production fees are required separately. (No fee for complete data submission) We accept orders for various purposes such as events, teams, goods, souvenirs, and gifts, from one piece to mass production. We also have many other garments not listed. Please feel free to inquire.

We have announced the "piCOBOT Electric (Standard I/O)," an electric vacuum gripper compatible with most collaborative robot brands. It enables clean and energy-efficient automation without the need for compressed air, simplifying equipment configuration while improving energy efficiency. It supports various collaborative robot brands, allowing for flexible automation. With a universal Standard I/O interface, smooth integration with major collaborative robots is possible. Additionally, its lightweight and compact design maximizes the robot's portability. By combining it with various suction cups and accessories from Piab, you can build a flexible handling system that accommodates diverse workpieces. Read the article here: https://www.piab.com/ja-jp/news/piab-launches-picobot-electric--all-electric-vacuum-gripping-for-any-cobot-brand

This column is a special series consisting of 12 installments themed around user manuals. In the first installment, we will focus on the often-overlooked "risks of postponing the user manual" in relation to CE marking compliance. In the process of obtaining CE marking, attention is often concentrated on design and safety measures, leading to cases where the preparation of the user manual is delayed. However, in practice, deficiencies in the user manual can lead to the following issues: - Rejection just before the review - Increased costs due to design revisions - Schedule delays - Product liability (PL liability) risks after shipment Even if CE marking is obtained, it is important to be aware that insufficient information provision can leave risks associated with the product.