Introducing the stainless steel "KM200 type" and the cast iron "C201R type" butterfly valves!

Long lifespan with a double off-center mechanism! Usable even in reverse pressure load lines due to the absence of flow direction.

The "KM200 series" is a high-performance stainless steel butterfly valve that accommodates a wide range of fluids thanks to its reinforced PTFE seat. The drive shaft center of the disc is double-eccentric, and the disc and seat remain non-contact until just before fully closed, resulting in minimal seat wear and a long lifespan. The structure allows the disc and seat to be pressed together by fluid pressure, regardless of the flow direction on either the primary or secondary side. 【Features】 - Long lifespan due to the double-eccentric mechanism - Usable in reverse pressure load lines as there is no specific flow direction - Accommodates a wide range of fluids due to the reinforced PTFE seat - Seat replacement can be easily performed by removing the set ring - Synthetic rubber and metal seats can also be selected according to usage conditions *For more details, please refer to the catalog (P5-P10) or feel free to contact us. (The English and Chinese versions of the catalog can be downloaded from the catalog page of the special website below.)

• valve

High sealing performance achieved with a heart-shaped self-seal! Introducing a long-lasting cast iron butterfly valve.

The "C201R type" features a double eccentric (double off-center) design for the disk's drive axis, allowing the disk and seat to remain in non-contact until just before full closure, resulting in minimal wear on the seat and a long lifespan for this cast iron butterfly valve. The seat is designed with a centering feature on the contact surface, creating a self-sealing mechanism that generates contact pressure on the disk's sealing surface due to fluid pressure, enabling efficient sealing from vacuum to high pressure. Additionally, during maintenance, the seat can be easily replaced by simply removing the seat cover. 【Features】 ■ Long lifespan due to double off-center mechanism ■ High sealing performance with centering self-seal ■ Easy maintenance *For more details, please refer to the catalog (P11-P17) or feel free to contact us. (The English and Chinese versions of the catalog can be downloaded from the catalog page of the special website below.)

• valve

We would like to introduce "BIC 10" handled by FCR and Bio Co., Ltd. This product is a jacket tube with a rack lid lock and rotation prevention feature (compatible capacity 8.1ml). For products equipped with the Rack ID function, a 2D code for Rack ID is added to the bottom surface of the rack, allowing simultaneous reading of the Tube ID (bottom surface 2D code) and Rack ID, thereby reducing stress on samples during the reading process. Additionally, the screw cap for 24 holes does not use sealing materials, ensuring good sealability and safe usage. 【Features】 ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Compatible with liquid nitrogen vapor *For more details, please download the PDF or feel free to contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

【Leak testers and leak test-related products provided by Fukuda】 Please take a look at our catalog! ★ Millimeter-wave radar & LiDAR leak tester: The air leak tester "FL-610" for controlling the separate type leak tester air pressure unit "LPU-300." ★ Leak tester for simultaneous measurement of workpieces: Measures two workpieces with one unit. By comparing two at the same time, you can increase the number of operations. ★ Electric air regulator for blood pressure monitor pressure confirmation: Excellent in repeatability of pressure control and pressure adjustment. ★ Leak tester for automotive lighting: Can be tested at low pressure without affecting the workpiece (item under inspection). ★ Air leak tester conversion box/cable: Peripheral equipment for air leak testers. Used when replacing old models with current products or when changing the model of current products. ★ Waterproof inspection testing device: A device for testing the waterproofness (equivalent to IPX7,8) and sealing of sealed products. It can be used for various products such as electronic devices and packaging containers.