[Example] An automatic door sensor suitable for places where a narrow detection range is needed, such as near a door with a counter.

A non-contact automatic door sensor that opens only for those who want to enter. It also contributes to infection control and energy conservation.

The "HA-T Series" is a non-contact automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing a hand close, addressing hygiene concerns even in facilities used by a large number of people. The sensor's detection range can be set in four configurations: left, center, right, and 12 spots, allowing customization according to the environment in which the automatic door is used. 【Features】 ■ Four spot settings tailored to the usage environment of the automatic door ■ Non-contact and hygienic opening and closing achieved through a light touch sensor ■ Reduces unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy savings ■ Two types of light touch sensors are available: "non-vision mount type" and "non-vision built-in type" ■ The "non-vision built-in type" features a flat design that does not stand out when mounted on the door *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Sensors

An automatic door sensor that opens only for people who want to enter without contact, whether on a busy street or in a narrow passage.

Energy-saving measures and infection control! Upgrade your facility environment with a non-contact light touch sensor! The 'HA-T401' can be configured to match the usage environment, allowing for touch area settings in four spots on the left, center, and right, as well as a total of 12 spots in four different configurations. You can open and close the automatic door just by bringing your hand close, ensuring hygiene and peace of mind without touching. When the light touch function is turned OFF, it can also be used as a wide-detection infrared sensor without a lens, and the ON/OFF status of the light touch function can be confirmed by the color of the standby LED. 【Features】 ■ Four spot settings to adapt to various door types ■ Non-contact solution for hygiene issues ■ Two setting modes that reduce unnecessary door openings and contribute to energy savings ■ Can also be used as a lens-free infrared sensor *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Sensors

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will exhibit at the "Japan Pavilion" established by the Ministry of the Environment at the 30th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP30), which will be held in Belém, Brazil, from November 10, 2025. "SPACECOOL" is a radiative cooling material that enables zero-energy cooling by dissipating heat into space. At our exhibition booth, we will showcase examples of its use not only in reducing air conditioning energy in buildings but also in heat mitigation measures (adaptation strategies) for tents and parasols. The Japan Pavilion aims to promote excellent technologies, products, and services that support global decarbonization and adaptation to climate change, and to achieve Japan's long-term climate change goal of "net zero by 2050." We believe that our participation plays an important role in this endeavor. Through this exhibition, we aim to accelerate our initiatives with local partners in regions severely affected by heat issues, such as the Middle East, including Saudi Arabia and the United Arab Emirates, as well as Southeast Asia, contributing to global decarbonization and climate change measures.

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from October 1 (Wednesday) to October 3 (Friday), 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies that solve issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wednesday) to October 3 (Friday), 2025, 10:00 AM to 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK