Thank you for attending the Writing Fair 2023! Tozai Electric Industry Co., Ltd.

We have published the TOZAI PRODUCTS CATALOG 2023.

The contents of the TOZAI PRODUCTS CATALOG 2023 Vol.1 are as follows: - Overview of LED tape lights - Installation examples - Various 24V LED tape lights - Various 12V LED tape lights - Various accessories for LED tape lights - Various inverters - Various LED light bars - Various filament LEDs - Other LEDs For more details, please contact us or refer to the catalog!

• Inverter
• Air purifiers
• LED lighting

LED tape light TFT! 60 LEDs/m can be cut every 5 cm! Easy installation with double-sided tape is suitable for both temporary and permanent setups! Some parts are RGB full color!

Cumulative achievements of approximately 50,000 reels of LED tape lights TFT! High flexibility to match installation dimensions, reducing wiring work. Easy installation and setup with double-sided tape! 【Features】 ■ A wide variety of color options, including RGB full color with SMD5050 ■ Cover: Heat shrink tubing (PO), improved weather resistance: filled with RTV rubber ■ Protection rating: IP54 ■ Uses Teraoka's double-sided tape, can be cut every 5 cm, suitable for permanent and temporary installations! ■ Easy installation, safe specification LED (double-sided) tape light with DC12V ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has less flicker, making it gentle on people ■ LED = energy-saving = CO2 reduction for decarbonization! 【Applications】 ■ Indoor indirect lighting (such as bar displays), interior lighting (stores, homes, etc.) ■ Space design lighting (events, concerts, etc.) ■ Decoration for showcases and signs *For more details, please contact us or refer to the catalog!

• LED Module
• Other FA equipment
• LED lighting

RGB3 elements arranged in three rows provide light that is about three times brighter and more vivid compared to conventional options, creating a striking and glamorous presence even in large venues! Each bulb can be individually controlled!

HVLED Tape Light TFTS! ■Maintains brightness up to the end of 3m ■Input voltage: DC12V ■Power consumption per bulb is 0.6W; for a cut size of 33.3mm, it is 18W (30LED)/m, and for a cut size of 100mm, it is 6W (10LED)/m ■Cross-sectional dimensions: W11mm × H3.4mm ■Can be installed on curved surfaces with a radius of 5cm or more ■IP65 water-resistant specification ☆For more details, please refer to the catalog page. Information about compatible controllers is also included. ☆Many successful installations in the entertainment industry! Used in concerts and theaters of famous artists! Leave it to the professionals at Tozai. 【Applications】 ■Lighting for equipment decoration ■Lighting for decoration and spatial production in facilities and stores ■Production lighting for events and performances *For more details, please contact us or refer to the catalog!

• LED Module
• LED fluorescent lamp
• LED lighting

LED tape light TF! 60 LEDs/m can be cut every 5 cm! Easy installation with double-sided tape is suitable for both temporary and permanent setups! Some parts are RGB full color!

The features of the LED tape light TF are as follows! ■ A wide variety of colors, with RGB full color in SMD5050 ■ Refer to the catalog for covers and fillers ■ Uses Teraoka double-sided tape, suitable for both permanent and temporary installations! ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful light such as infrared and ultraviolet rays, and has less flicker, making it friendly to people ■ LED = energy-saving = CO2 reduction for decarbonization! ■ DC12V 【Applications】 ■ Indoor indirect lighting (such as bar displays), interior lighting (stores, homes, etc.) ■ Space design lighting (events, concerts, etc.) ■ Decoration for showcases, display shelves, and signs *For more details, please contact us or refer to the catalog.

• LED Module
• Other FA equipment
• LED lighting

LED tape light TFTH! 60 LEDs/m can be cut every 5 cm! Easy installation with double-sided tape is suitable for both temporary and permanent setups! Some parts are RGB full color!

The LED tape light TF series 'TFTH type' offers high flexibility to match installation dimensions and reduces wiring work. Easy installation and setup with double-sided tape! 【Features】 ■ SMD5050 includes RGB full color options ■ Cumulative production record of approximately 50,000 reels of LED tape lights! ■ The IP68 outdoor (indoor) cover is an oval-shaped silicone tube. The filler is RTV rubber. ■ Easy installation, safe DC12V LED (double-sided) tape light ■ Uses Teraoka double-sided tape, suitable for permanent and temporary setups! ■ Can be installed on curved surfaces, can be cut every 5 cm (30 LEDs/m can be cut every 10 cm) ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has minimal flicker, making it gentle on people ■ LED = energy-saving = CO2 reduction for decarbonization! * For installation examples of tape lights, compatible controllers, slim aluminum frames, and dotless tubes, please refer to the catalog! * For more details, please contact us or check the catalog.

• LED Module
• Other FA equipment
• LED lighting

This is a quick reference table for selecting the model of LED tape lights (lighting for creating light spaces). Some models support RGB full color! 60 LEDs/m can be cut every 5 cm!

We have prepared an LED tape light model selection table positioned as a quick reference guide! 【Features】 ■ Thin and flexible tape light ■ Available in two types: SMD3528 and SMD5050, with SMD5050 supporting full RGB color ■ A wide variety of light source colors available ■ Safe specification of DC12V ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as infrared and ultraviolet, and has minimal flicker, making it user-friendly ■ LED = Energy-saving = CO2 reduction for decarbonization! 【Applications】 ■ Indoor indirect lighting (such as bar effects), interior lighting (stores, homes, etc.) ■ Spatial effect lighting (events, concerts, etc.) ■ Decoration for showcases and signs *For more details, please contact us or refer to the catalog!

• LED Module
• Other FA equipment
• LED lighting

The RGB3 elements are arranged in three rows, and the light is about three times brighter and more vivid compared to conventional ones, making a strong presence and a dazzling effect even in large venues! Each bulb can be individually controlled!

■Maintains brightness up to 3m ■Input voltage: DC12V ■Power consumption per bulb is 0.6W; for a cut size of 33.3mm, it is 18W (30LED)/m, and for a cut size of 100mm, it is 6W (10LED)/m ■Cross-sectional dimensions: W11mm × H3.4mm ■Curved installation possible with a radius of 5cm or more ■IP54 indoor specification ☆For details, please refer to the catalog page. Information about compatible controllers is also included. ☆Many successful installations in the entertainment industry! Used in concerts and theaters of famous artists! Trust the professionals at Tozai. 【Applications】 ■Lighting for equipment decoration ■Lighting for decoration and spatial production in facilities and stores ■Production lighting for events and performances *For more information, please contact us or refer to the catalog!

• LED Module
• LED fluorescent lamp
• LED lighting

Full-color LED tape light 12V. Individual RGB intelligent dimming controlled by DMX-SPI decoder for light space effects. Easy installation with double-sided tape.

The specifications for the full-color 12V are as follows! 【Specifications】 ■Model Name: TZHC-F12V-16L-48LED-W ■Rated Voltage: 12V / Power Consumption: 11.6W ■Number of LEDs: 48pcs/1m, LED Pitch: 20.8mm, Cut Size: 62.5mm ■Control IC: WS2811 ■LED 5050SMD RGB: Red: 600mcd / 625nm, Green: 1200mcd / 525nm, Blue: 300mcd / 465nm ■LED Beam Angle: 120 degrees ■PCB Size: W: 10mm x L: 500mm Max. 5m/roll ■Design Life: 50,000 hours, Operating Environment Conditions: Indoor -20 to +40℃ 【Features】 ■Full-color lighting (uses 5050 full-color LEDs) ■Minimal emission of harmful rays such as infrared and ultraviolet, and flicker-free, making it user-friendly ■Easier waste disposal compared to fluorescent lights 【Applications】 ■Indirect lighting, decorative lighting, and light space production for store and room interiors ■Lighting for amusement industry equipment ■Edge lighting for signs ■Commercial LED lighting for under-shelf lights and showcases in stores ■Online live streaming, etc.

• LED Module
• Other FA equipment
• LED lighting

LED tape light side view. Single color and RGB for indoor and outdoor use, 12V slim type, cut size: 5cm, number of LEDs: 3 per 5cm. For edging and indirect lighting.

The cumulative achievement of the LED tape light side view is approximately 50,000 reels! The features and uses are as follows. 【Features】 ■ Slim and flexible LED light. Indoor interior lighting! ■ Can be cut at 5cm intervals (every 3 pieces)! Width: approximately 10mm, thickness below 2.3mm, allowing for effective displays in various locations! ■ Please contact us in advance for cutting (covers and fillers may worsen workability) ■ Easier waste disposal compared to fluorescent lights ■ Side lighting increases variations ■ Emits less harmful light such as heat rays and ultraviolet rays, and has less flicker, making it gentle on people ■ LED = Energy-saving = CO2 reduction for decarbonization! Safe to handle with a 12V specification, suitable for incorporation into fixtures and other applications! 【Uses】 ■ Indoor indirect lighting (such as bar displays), interior lighting (stores, residences, etc.) ■ Space display lighting (events, concerts, etc.) ■ Decoration for showcases and signs Accessories sold separately: https://kensetsu.ipros.jp/product/detail/2000423996?hub=19+140413 *For more details, please contact us or refer to the catalog!

• Chip type LED
• LED Module
• LED lighting

LED tape light TFTS! 60 LEDs/m can be cut every 5 cm! Easy installation with adhesive tape is suitable for both temporary and permanent setups! Some parts are RGB full color!

The LED tape light TFTS offers high flexibility to match installation dimensions and reduces wiring work. Easy installation and setup with double-sided tape! 【Features】 ■ SMD5050 available in RGB full color ■ Cumulative production record of approximately 50,000 reels of LED tape lights ■ Cover: square silicone tube, filler: none ■ Easy-to-install DC12V safety specification LED (Teraoka double-sided) tape light ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful light such as infrared and ultraviolet rays, and has minimal flicker, making it gentle on people ■ LED = energy-saving = CO2 reduction for decarbonization! ■ IP65, waterproof specification for indoor and outdoor use *For more details, please contact us or refer to the catalog.

• LED Module
• Other FA equipment
• LED lighting

LED tape light TFN! 60 LEDs/m can be cut every 5 cm! Easy installation with double-sided tape is suitable for both temporary and permanent setups! Some are RGB full color!

The LED tape light TFN offers high flexibility to match installation dimensions and reduces wiring work. It allows for easy installation and setup with double-sided tape! 【Features】 ■ Approximately 50,000 reels of LED tape light sold! ■ Easy installation with a safe 12V LED (double-sided) tape light ■ Double-sided tape from Teraoka ■ Protection rating: IP20 ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has minimal flicker, making it gentle on the eyes ■ LED = energy-saving = CO2 reduction for decarbonization! 【Applications】 ■ Indoor indirect lighting (such as bar displays), interior lighting (stores, homes, etc.) ■ Ambient lighting for events, concerts, etc. ■ Decoration for showcases and signs *For more details, please contact us or refer to the catalog.

• LED Module
• Other FA equipment
• LED lighting

The LED tape light TFT RGB-SPI 12V controller comes with a screen. Individual control is possible for every 3 LEDs!

The LED tape light TFT RGB-SPI 12V features a control IC (WS2811) arranged every 3 LEDs. It operates on DC12V and can be extended up to 5m (1 roll), utilizing high-brightness 5050 SMD (RGB)! 【Features】 ■ Easy installation with double-sided tape from Teraoka 777! ■ Can be cut every 5cm! ■ Cumulative production record of approximately 50,000 reels of LED tape lights! ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful light such as heat rays and ultraviolet rays, reducing flicker and being gentle on people ■ LED = Energy-saving = CO2 reduction for decarbonization! 【Applications】 ■ Indoor indirect lighting (such as bar effects), interior lighting (stores, homes, etc.) ■ Spatial effect lighting (events, concerts, etc.) ■ Decoration for showcases and signs ☆ For installation examples of tape lights, compatible controllers, and dotless tubes, please refer to the catalog! *For more details, please contact us or refer to the catalog!

• LED Module
• Other FA equipment
• LED lighting

The 100V LED light bar reduces power installation costs and shortens construction time! It can be mounted using shelf hooks or magnets! The lightweight aluminum frame has high strength and excellent heat dissipation.

The features of the LO series LED light bar 100V are as follows: 1. No electrical work is required, reducing costs and time for electrical installation. 2. Easy installation with shelf hooks or magnets. 3. The slim and lightweight aluminum frame offers high strength and excellent heat dissipation. 【Features of each component】 ☆ Aluminum Frame The body, measuring 8mm in height and 28mm in width, is slim and stylish. - Ensures high heat dissipation by closely adhering to the LED substrate. - Despite being relatively lightweight, it has high strength. ☆ Cover (Light Guide Plate) Selection of brightness without uneven light. - Available in frosted diffusion type and transparent cover type. - The transparent cover type has approximately 8% higher total luminous flux. ☆ Color Temperature Choose the color temperature according to the installation situation. * For details, please refer to the catalog or contact us. 【Product Features】 - All components used, except for the LED, are made in Japan! - Installation: Shelf hooks at two locations on the left and right. - Dimensions: Width: 28mm, Thickness: 8mm. - Unit length can be up to Max. 1207mm. - Easier waste disposal compared to fluorescent lamps. - Emits less harmful rays such as infrared and ultraviolet light, and has minimal flicker, making it user-friendly. - Standards: Compliant with RoHS2.0. - LED (from a major South Korean manufacturer).

• LED Module
• LED fluorescent lamp
• LED lighting

TOZAI's inverter shipment record exceeds 10 million units. Feel free to leave custom orders for sterilization devices to us!

【Domestic Production Inverter Board】 The inverter is essential for the use of ultraviolet sterilization lamps. With the technology and experience cultivated by TOZAI over many years, we will contribute to the development of your sterilization lamp equipment. 【Features】 - Reliable domestic production - A wide range of lineups tailored to various power sources - Flexible support for various customizations such as residual heat processing and non-light detection - Lightweight, energy-efficient, and high luminous efficiency compared to copper-iron stabilizers We also offer a variety of other sterilization lamps and sockets for sterilization lamps. Please feel free to consult with us. We have a rich lineup that supports sterilization lamps from GL4 to GL40 in straight tube starter types. For more details, please feel free to contact us. Please note that the dimensions and electrical characteristics of the fluorescent lamp 30W (FL30) and the sterilization lamp (GL30) differ. *Please check the JIS standards for details. *It is necessary to confirm the matching of the lamp you will use with the inverter (this is not a confirmation of sterilization effectiveness). We have evaluation units available, so please feel free to inquire.

• inverter
• Inverter
• Air purifiers

The core components of the UV-C sterilization device, including the PSE inverter, sterilization lamp, and socket, are all available from our company, shortening the procurement and application period for sterilization device components!

The details of the ultraviolet (UV-C) sterilization device are as follows. By attaching the sterilization lamp to the socket and connecting it to the inverter board, the sterilization lamp will light up. 【Compatible Lamps】 Fluorescent lamp 30W (FL30) and sterilization lamp (GL30) have different dimensions and electrical characteristics. Please refer to the JIS standards for details. *It is necessary to confirm the matching of the lamp used and the inverter (this is not a confirmation of sterilization effectiveness)! ■Advantages ☆Shortened procurement period - PSE-certified PSE inverters can shorten the application period for sterilization devices! - The driving components of the sterilization device can be assembled all at once at our company. ☆Optional support - Please consult us for harness processing and other inquiries! 【Inverter Features】 ■Lightweight, compact, and low power consumption compared to copper and iron, leading to energy savings. ■The inverter method operates at a high frequency of 45-50 kHz, increasing luminous efficiency and eliminating flicker and noise! ■The inverter lighting circuit efficiently manages preheating time! ■Easy assembly with the board unit. ■Cumulative shipment record: 10 million units, with transactions with over 100 companies last year. ■Produced domestically. 【Safety Design】 ■Equipped with protection circuits (overheating: thermal; overcurrent: fuse). ■Ultraviolet sterilization device.

• inverter
• Ultraviolet irradiation equipment
• Inverter

DC24V UV-LED light bar! Suitable for integration into sterilization equipment and more. Length, mounting method, and LED pitch can also be customized!

LED light bars are easy to install: DC24V, lightweight and slim, ideal for integration into equipment! Smaller compared to UV lamps, with adjustable output based on the number of particles! Available in two types: UV-A and UV-C, please choose according to your application. 【UV-A Applications: Alternative to Black Lights】 Insect traps, counterfeit bill detection, resin curing, etc. 【UV-C Applications: Alternative to Sterilization Lamps or for Integration into Sterilization Equipment!】 Air sterilization, surface sterilization, water sterilization, etc. 【Features】 ■ Customizable length ■ Lightweight aluminum frame with high strength and excellent heat dissipation ■ Connector installation processing available upon request. ■ Installation: Can be mounted with screws, shelf hooks, or magnets. *For more details, please contact us or refer to the catalog!

• Chip type LED
• LED Module
• LED lighting

Blacklight fluorescent lamp! A lamp that efficiently emits a peak wavelength of 360nm (in the UV-A wavelength range), different from sterilization lamps!

The details of the black light fluorescent lamp are as follows. ■Features ● Uses a phosphor that absorbs visible light and has a peak in the emission spectrum around 360nm ultraviolet light, along with a deep blue filter glass that efficiently transmits near-ultraviolet light (peak wavelength around 360nm)! ■Applications Used as a light source for testing, inspection, identification, investigation, etc.! Examples of use ● Various identification (gems, ores, etc.), counterfeit detection (documents, stamps, etc.), light sources for insect trapping and moth attracting lamps, light sources for photochemical reactions. * The rated lifespan indicates the time until the ultraviolet output reaches 60% of its initial value! ■Lighting fixtures (holder type, trough) https://premium.ipros.jp/tozaidensan/product/detail/2000529995/?hub=148+2618078 ☆ Also available is an inverter board to drive separately sold black light fluorescent lamps: https://premium.ipros.jp/tozaidensan/product/detail/2000419256/?hub=163&categoryId=45680 * For more details, please contact us or refer to the catalog.

• inverter
• Inverter
• Fluorescent lamp

The ultraviolet sterilization lamp generates a rich amount of the most powerful germicidal ultraviolet light at 253.7nm in the short wavelength UV-C range!

The details of the sterilization lamp are as follows. Since the sterilization lamp is invisible (cannot be seen with the naked eye), please check with the manufacturer of the power supply side (such as the fluorescent lamp inverter board) to ensure there are no issues with its use! 【Features】 1. The ultraviolet light from the sterilization lamp is harmful to the eyes when viewed directly or through reflected light, and since it is invisible, it is not apparent when the lamp has burned out. By installing an optional lifespan detection circuit on the inverter board driving the sterilization lamp, you can know when the lamp has burned out! Therefore, continuous sterilization effectiveness can be achieved! 2. The output is maximized at an ambient temperature of 20°C! If used at very high or low temperatures, cooling or insulation may be necessary! 3. As humidity increases, the resistance of bacteria increases and the sterilization power decreases (it is said to drop sharply at relative humidity levels of 60-70%). 4. Please check the catalog for the lifespan! 【Applications/Examples】 Medical and welfare facilities, cultural, educational, and sports facilities, commercial, accommodation, transportation, commercial, and industrial facilities, residential facilities, administrative facilities - Ultraviolet (UV-C) air purifiers, automatic ultraviolet sterilization devices, sterilization lockers, cleaning robots 【Related】 Food hygiene, pharmaceuticals, chemical products *For more details, please contact us or refer to the catalog.

• Inverter
• Air purifiers
• Fluorescent lamp

For outdoor LED tape lights, there are UB and standard types. The UB has higher color rendering and luminous flux, but it consumes more power and has a shorter maximum length! Rated voltage is 8V.

TOKI LSC signage is as follows! 【Features】 ■ All-direction emitting LED ■ Dimming: Optional ■ Lamp replacement available in case of trouble ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as infrared and ultraviolet, and has less flicker, making it friendly to people ■ LED = Energy-saving = CO2 reduction for decarbonization! 【Standard Applications】 Decorative lighting: Eye-catching lighting for building facades, amusement, interior lighting for weddings and entertainment, etc. 【Specifications】 Color rendering index: 70, Power consumption = 0.1W/light Product weight = approximately 100g/m 【Specifications】 Material = Tape wire: Soft PVC, Socket part: Transparent PC Lead wire = 1.55㎟×2, 0.5m included Includes spare end cap Transparent rubber cap attached, bending and cutting: OK 【UB Applications】 Indirect lighting for stores and restaurants, sign lighting. Indoor interior lighting 【Specifications】 Color rendering index: 85, Power consumption = 0.4W/light Product weight = approximately 100g/m 【Specifications】 Material = Tape wire: Soft PVC, Socket part: Transparent PC Lead wire = 1.25㎟×2, 0.5m included Transparent rubber cap attached Includes spare end cap, bending and cutting: OK

• Bullet-shaped LED
• LED Module
• LED lighting

LED tape lights come in two types: UB and regular. The UB has higher color rendering and lumen output, but it consumes more power! Rated voltage is 8V.

The features of the TOKI TLP Tape Light Standard Constant Point Type Toki Reds Standard and UB are as follows: 【Features】 ■ Omnidirectional emitting LED for decorative lighting ■ Dimming: Optional ■ Lamp replacement possible in case of trouble ■ Easier waste disposal compared to fluorescent lamps ■ Emits less harmful rays such as heat and ultraviolet light, and has less flicker, making it gentle on people ■ LED = Energy-saving = CO2 reduction for decarbonization! 【Toki Reds Standard Applications】 Decorative lighting: Eye-catching lighting, interior lighting for amusement, etc. 【Specifications】 Color rendering index: 70, Power consumption = 0.1W/light, Product weight = approximately 70g/m 【Specifications】 Material = Tape wire: Transparent soft PVC, Socket part: Transparent PC Lead wire = 0.75㎟×2 0.5m included, spare end cap included, bending and cutting: OK 【Toki Reds UB Applications】 Indirect lighting in stores and restaurants, indoor interior lighting, sign lighting 【Specifications】 Color rendering index: 85, Power consumption = 0.4W/light, Product weight = approximately 70g/m 【Specifications】 Material = Tape wire: Transparent soft PVC, Socket part: Transparent PC Lead wire = 0.75㎟×2 0.5m included, spare end cap included, bending and cutting: OK

• Bullet-shaped LED
• LED Module
• LED lighting

LED tape lights come in two types: UB and standard. UB has higher color rendering and lumen output, but it consumes more power and has a shorter maximum length.

The features of the tape light are as follows! 【Features】 ■ Omnidirectional emitting LED suitable for decorative lighting ■ Dimming: Optional ■ Lamp replacement possible in case of trouble ■ Easier waste disposal compared to fluorescent lights ■ Emits less harmful rays such as heat and ultraviolet light, and has less flicker, making it gentle on people ■ LED = Energy-saving = CO2 reduction for decarbonization! 【TLP Applications】 - Standard: Decorative lighting: Eye-catching lighting for building exteriors, interior lighting for amusement facilities, etc. - UB: Indirect lighting in stores and restaurants, indoor interiors, sign lighting 【LSC Applications】 - Standard: Toki Reds standard: Decorative lighting: Eye-catching lighting for indoor and outdoor building exteriors, interior lighting for amusement facilities, etc. - UB: Indirect lighting in stores and restaurants, indoor interiors, sign lighting ◎ Differences between indoor TLP and outdoor LSC 【Specifications】 Product weight = approximately 70g/m (TLP), approximately 100g/m (LSC) 【Specifications】 Material = Tape wire: Transparent soft material (TLP), PVC soft PVC (LSC) Lead wire = 0.75㎟×2 0.5m included (TLP), 1.55㎟×2 0.5m included (LSC) Transparent rubber cap attached (LSC) *Other Toki products are also available.

• Bullet-shaped LED
• LED Module
• LED lighting

The DC5V full-color LED tape light allows for individual RGB intelligent effect control for each LED with a DMX-SPI decoder!

The details of the LED tape light DC5V full color are as follows: ■ Model Name: TZ-HC-F5V-60L-60LED-W ■ Rated Voltage: DC5V / Power Consumption: Max. 14.4W / 1m ■ Number of LEDs: 60 pcs / 1m, LED Pitch / Cut Size: 16.6mm ■ LED 5050SMD RGB: Built-in WS2812B (Control IC) Red: 600mcd / 625nm, Green: 1200mcd / 525nm, Blue: 300mcd / 465nm ■ LED Beam Angle: 120 degrees ■ PCB Size: W: 10mm x L: 500mm Max. 4m/roll ■ Operating Environment Conditions: Indoor: -20 to +40℃, Design Life: 50,000 hours 【Applications】 ■ Commercial LED lighting for under-shelf lights and showcases ■ Indirect lighting, decorative lighting, and light space production lighting for stores and rooms ■ Lighting for amusement industry equipment ■ Edge lighting for signs ■ Production lighting for weddings, after-parties, and various events ■ Online live streaming, etc. * Optional mounting holder for fixing is available on the last page of the catalog * Cumulative production record of LED tape lights is approximately 50,000 reels.

• LED lighting

LED seamless lighting fixtures are alternative lighting for T5 and T6 slim tube fixtures! Suitable for hotel lobbies, exhibition venues, supermarket shelf lighting, indirect lighting for fixtures, and light space interior lighting.

LED seamless lighting is an LED lighting solution designed to replace T5 and T6 slim tube fixtures. It can be connected in series with up to 10 units. Even with a built-in power supply, it remains slim, and the luminous efficiency is 105lm/w. It is ideal for under-shelf, fixture, indirect, and ambient interior lighting! 【Applications】 ■ Under-shelf lighting for stores ■ Lighting for showrooms and clinics ■ Fixtures ■ Indirect lighting, decorative lighting, and ambient lighting for stores and rooms, including walls and displays 【Notes】 ・Not compatible with dimming ・When connecting products, please install end caps on the last unit. *For installation, please refer to the optional components in the catalog. 【Specifications】 The following may vary by series, so please refer to the catalog for details (model name, size, power consumption, input current, number of LED elements, weight, total luminous flux). ■ Input voltage: AC100–200V ±10% 50/60Hz ■ Color temperature: 2700K, 5000K (2000K, 2400K, 3000K, 3500K, 4000K, 4500K, 5700K, 6500K are made to order) ■ Color rendering index: Ra80 or higher ■ Design life: 40,000 hours ■ Main materials: Aluminum, polycarbonate ■ Operating temperature: -10℃ to +40℃

• LED Module
• LED fluorescent lamp
• LED lighting

With a thickness of 4.4mm, it can be used in narrow spaces! TOZAI's LED light bar allows for custom options such as unit length and light color!

The high-output version of the LF series LED light bar has arrived. It maintains a slim, stylish design while becoming brighter with higher output. 【Features】 ■ Over twice the brightness compared to the conventional LF series in terms of total luminous flux ■ Slim design with a thickness of 4.4mm, suitable for narrow spaces ■ A wide variety of options for LED pitch, unit length, and light colors ■ Splash-proof design (silicone filled, equivalent to protection grade IP54) ■ Compliant with RoHS2.0, minimizing environmental impact ■ Optional harness connector specification available (connectable, maximum allowable input current 1.5A) 　※ Standard specification is parallel wiring ■ Reliable domestic design and production (Made in Japan) 【Applications】 ■ Under-shelf lighting for stores, LED lighting for showcases, acrylic panels, and product shelves ■ Indirect, decorative, and ambient lighting for store interiors and rooms ■ Lighting for amusement equipment displays ■ Embedded applications for industrial equipment ■ Situations requiring direct illumination *For more details, please inquire or refer to the catalog!

• LED Module
• LED fluorescent lamp
• LED lighting

For the development of ultraviolet (UV-C) sterilization devices. We propose a reliable domestic PSE inverter (power supply unit)!

Interest in ultraviolet sterilization devices has increased during the COVID-19 pandemic, leading to a surge in inverter demand! We have achieved cumulative shipments of approximately 10 million units, delivering to over 100 companies just last year. To further contribute to our customers, we have developed inverters housed in PSE cases. Our inverters are PSE certified, which helps reduce both "cost" and "time" during your product development. This allows for a shorter time to market! We offer a wide range of products and can provide customized solutions. Please take a look at our catalog. **Features of the Inverter:** - "Reliable domestic production" - Innovations to reduce the number of components, maximizing performance with fewer parts ⇒ Fewer components = lower failure rates and heat generation (loss), resulting in increased reliability - Equipped with protective features (fuses, thermal protection, etc.) - Lighter, more energy-efficient, and better light emission efficiency compared to copper-iron stabilizers **Examples of Options and Customizations:** - Non-light detection: Confirmation of non-lighting of sterilization lamps that cannot be viewed directly - Others: Dimming, preheating circuits, harness processing, and various other options available Combining your expertise with our inverters, sockets, and lamps is ideal! Please feel free to consult with us.

• inverter
• Inverter
• Air purifiers

TOZAI's inverter shipment record exceeds 10 million units. Many applications in sterilization devices! We can provide a complete supply of lamps, lamp sockets, and inverters!

【Domestic Production Inverter Board】 An inverter essential for the use of fluorescent lamps and ultraviolet sterilization lamps. With the technology and experience cultivated by TOZAI over many years, we will meet your company's needs. 【Features】 ■ Reliable domestic production ■ A wide lineup compatible with fluorescent lamps and sterilization lamps from 4W to 40W ■ Flexible support for various customizations such as preheating circuits and non-lighting detection ■ Lightweight, energy-saving, and high efficiency compared to copper-iron stabilizers *It is necessary to confirm the matching of the lamp you will use with the inverter. We can assist with lamp selection and matching confirmation. Evaluation samples are also available. 【Regarding Procurement of Peripheral Components】 Are you struggling with the global shortage of semiconductors and components? With connections built over 70 years of history with suppliers, we can assist you in procuring the necessary components. (Lamps, sockets, switches, connectors, power supplies, fans, wires, etc.) If you have any concerns, please feel free to contact us.

• inverter
• Inverter
• Air purifiers

Fluorescent lamp inverters (domestic production): lighting fixtures, various controls, AC/DC power supplies, ultraviolet sterilization lamps, near-ultraviolet 360nm black light fluorescent lamps.

Free combination of fluorescent lamp inverters & special fluorescent lamps (blacklight fluorescent lamps, UV-C 253nm ultraviolet sterilization lamps)! 【Features】 <Fluorescent Lamp Inverter: Domestic Production> Super lightweight and compact compared to copper and iron, the inverter operates at a high frequency of 45-50kHz, eliminating flicker perception to the naked eye! ■Lighting Fixtures (Holder Type, Trench) - The trench significantly reduces assembly time! ■Control (Regulated) Fluorescent Lamp Inverters of various series available - Dimming: Linear control for brightness according to purpose - Control: Flashing, ON/OFF - Lifespan Detection: Function to detect non-lighting and disconnection due to fluorescent lamp lifespan - Hf Fluorescent Lamp: High-frequency lighting dedicated fluorescent lamps, straight tube type, circular (circle line) ■Slim Line: Slim Line T5 (16・20mm) fluorescent lamps ■AC/DC Power Fluorescent Lamp Inverter ■Inverter-type stabilizers for UV-C air purifiers, sterilization lockers, cleaning robots, etc., as well as for sterilizing banknotes, cleaning medals, and automatic UV sterilization devices ■Efficient preheating time with fluorescent lamp inverter lighting circuit! <Ultraviolet Sterilization Lamp: Contactless Tech (Avoiding Sealing)>

• Ultraviolet irradiation equipment
• Inverter
• Air purifiers

East and West of Lamp Sockets! Latest Comprehensive Catalog! LED-related items are listed separately! [Free Materials Available] Includes many technical explanations of incandescent bulbs, safety precautions, and warnings!

East and West of Lamp Sockets! Latest Comprehensive Catalog! 【Contents】 ■ Halogen P.1 ■ HID Lamps P.15 ■ Black Light Fluorescent Lamps, Germicidal Lamps, Inverters P.19 ■ Incandescent Lamps P.25 ■ Sockets P.67 ■ Technical Explanation of Incandescent Bulbs, Safety Precautions and Warnings P.83 *For more details, please contact us or refer to the catalog!

• Lamps and light emitting devices
• Fluorescent lamp
• Floodlight

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

The following cameras are supported in the Elua 7.6 series. Product introduction: https://aileunsys.co.jp/b01_aileun.html Compatible camera list: https://aileunsys.co.jp/aileun/compatible_camera.html Newly added: - Manufacturer: DAHUA Model number (1 model): DH-IPC-HFW2449TLN-S-PRO

Dear Valued Customers, Thank you very much for your continued support. We would like to inform you that our company will be closed for summer vacation from Wednesday, August 13, 2025, to Friday, August 15, 2025. We will resume normal operations on Monday, August 18. We appreciate your understanding and cooperation.

Technoa Co., Ltd. (Headquarters: Gifu City, Gifu Prefecture, Representative Director: Koji Yamazaki) will hold a limited-time summer special event, "Monozukuri DX CAMP," from Saturday, August 9, 2025, to Saturday, August 23, 2025. Small and medium-sized manufacturing companies face challenges such as a shortage of specialized personnel and a lack of know-how and information, which act as barriers to promoting DX (digital transformation). This event will provide a step-by-step approach to "realistic DX," based on the know-how accumulated by Technoa while supporting the DX transformation of small and medium-sized manufacturing companies. It will be structured as DAY.1 to DAY.5, offering an opportunity for skill development during the summer break and supporting the learning and growth of small and medium-sized manufacturers. For more details, please refer to the related link.

JOHNAN has updated a webpage summarizing the selection points to solve various challenges in large-scale processing (quality maintenance, short delivery times, costs). This article introduces the challenges faced in large-scale processing based on years of knowledge and experience, as well as the key points for choosing the optimal contractor that balances quality and short delivery times. If you are looking for a reliable contractor, please make use of our "Large-Scale Processing Solutions." ▼For more details "Large-Scale Processing Solutions to Achieve Product Quality and Short Delivery Times" https://www.johnan.com/solution/process/processing-assembly/post_8.html