Usage example: Grating cover (permeable) anti-slip (Slip Rate Sigma 03 SR method)

This is a new anti-slip method for permeable grating covers. It ensures safety for people, cars, bicycles, motorcycles, and dogs, making it barrier-free!

"Slip Rate Σ03" is a permeable, anti-slip, ultra-strong flooring material with high water permeability and slip resistance. The mixture of Slip Rate Sigma 03 resin and aggregates is embedded between the ribs of the grating cover and finished at the surface height with anti-slip processing. [Features] ■ Easy to repair ■ Epoxy resin is milky white ■ Curing time is about 3 hours at room temperature (complete curing in 24 hours) ★ Using natural stone aggregates (basic three colors), it can be finished to match the landscape as a decorative anti-slip grating cover. ★ In addition to slip resistance, it also prevents accidents caused by high heels getting stuck, prevents leaves and debris from flowing into ditches, and addresses pest issues. ★ By mixing in melted slag (1-3mm) from incineration plants, it also contributes to recycling. * For more details, please contact us or download the catalog.

• Other safety and hygiene products

It demonstrates its power even when wet or dry! Of course, you can choose from various colors, including transparent.

"Slip Rate Σ01" is an ultra-strong anti-slip color coating used for anti-slip applications on steel plates, checker plates, manhole covers, mortar, and floor coatings. Since it uses a transparent paint, not only can you choose a transparent color, but various colors are also available. Different aggregates can be used, and the amount of aggregate allows you to select the degree of slip resistance. 【Features】 ■ The resin is colorless and transparent ■ Strong adhesion ■ Easy to repair ■ Selectable aggregates (various colors) ★ Suitable for high-publicity areas where safety is required (stations, hospitals, schools, nursing homes, stairs on pedestrian bridges, entrances, bathrooms, pools, etc.) ★ Areas where water exposure is expected (kitchens, corridors, restrooms, stairs, entrances) ★ Stair nose identification and anti-slip for visually impaired individuals ★ Curb identification and anti-slip at vehicle entry points on sidewalks *For more details, please contact us or download the catalog.

• Organic Natural Materials
• Coating Agent
• Other safety and hygiene products

Transparent paint with special particles and anti-slip treatment. It is not wax. Since it is a coating made with resin, the effect lasts for a long time.

"Slip Rate Σ02" is a transparent hard coating with special particles that is ideal for slip resistance on surfaces such as wooden decks, flooring, glass, and stainless steel. The finish is colorless and transparent with a glossy appearance and fine texture. It is safe for both humans and dogs. It can also be finished with a matte look and has water-repellent properties. Additionally, repairing worn areas is easy. 【Features】 ■ Easy application ■ Strong adhesion ■ Transparent finish ■ Curing time is approximately 3 hours at room temperature ★ Suitable for high public safety areas (hospitals, schools, nursing homes, halls, flooring rooms, entrances, bathrooms, pools, wooden decks, etc.) ★ Areas where water exposure is expected (kitchens, corridors, restrooms, stairs, entrances, wooden decks) *For more details, please contact us or download the catalog.

• Organic Natural Materials
• Other safety and hygiene products
• others

Easily and powerfully implement anti-slip measures for steel materials such as manhole covers, iron plates, and grates with heat-melt adhesive anti-slip sheets!

"Rojingurippu" is a sheet-type anti-slip material made primarily from natural materials (pine resin) aimed at creating a "safer road environment." [Features] ■ Outstanding anti-slip effect ■ Environmentally friendly ■ Easy to install ★ The anti-slip effect can achieve a slip resistance value comparable to that of pavement. ★ Environmentally friendly! The main component is a natural material (pine resin). It contains no harmful substances. ★ Easy to install! Installation is completed in about 50 minutes. ★ Rojingurippu has been featured in newspapers and on television as a groundbreaking measure for barrier-free road surfaces! *For more details, please contact us or download the catalog.

• Organic Natural Materials
• Other safety and hygiene products
• others

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.