Don't you think that the delivery time for DC-DC converters and AC-DC power supplies takes a long time?

It is a 2-in-1 design device that allows the use of battery charger mode and power supply mode in a single unit.

Battery Charger "NPP Series" This product is equipped with two modes: battery charger mode and power supply mode. In battery charger mode, it excels as a charger by utilizing stage charging! However! In power supply mode, it is also possible to provide stable DC output by connecting a load while charging the battery! In the "3-stage charging" of the charger mode, it transitions from bulk charging to absorption charging and then to float charging. However, if a minimal load such as 5A is used, it may not transition to float charging and the charging will stop (it will not reach full charge). By using power supply mode, it can achieve a full charge while also providing stable power to the load. Once the battery is fully charged, it will only supply power to the load. By disconnecting the battery, it can also be used as an AC-DC power supply. For more details, please visit our website or refer to the catalog below.

• Switching Power Supply
• Secondary Cells/Batteries
• Charger

The DDR Series is a compact DIN Rail TYPE DC-DC converter that can be easily mounted on a DIN Rail.

The DDR Series is a super slim (52.5mm) DIN Rail TYPE DC-DC converter. It features an extremely wide input voltage range of 4:1 or 2:1 and allows for output voltage adjustment. It has a wide operating temperature range and includes an isolation design along with many features. It is adopted in various systems and applications such as industrial applications, railway control, security control, industrial control, communication systems, and power supplies for factory automation. 【Features】 - Wide temperature range from -40℃ to +85℃ - Compliant with BS EN/EN50155 and BS EN/EN 45545-2 - Slim type DC-DC converter - Wide input range of 2:1 or 4:1 - Adjustable output voltage - DC4000V I/O reinforced isolation - Easy installation on DIN rail - Primary and secondary isolation design - Protection: overvoltage protection, overload protection, short circuit protection, reverse connection protection, undervoltage input protection - Certifications: UL / AS/NZS / EAC / CB / CE / UKCA - 3-year long-term warranty *For more details, please refer to the PDF document or feel free to contact us.

• converter

It is a DC-DC converter that supports redundant systems.

This is a DC-DC converter that supports a redundant modular system. It features built-in dual rail DC input contacts and a single output, making it suitable for a wide range of applications within a broad temperature range of -40°C to +80°C. 【 What is Redundant Modular? 】 Redundancy in a system is not a negative concept. By using multiple units in parallel, if an issue arises that renders one unit inoperable, another can start up as a backup power source, maintaining the safety of the system. It serves as a backup power source to enhance the overall reliability of system operation. 【 Features 】 - Wide temperature range from -40°C to +80°C - Usable in harsh environments - Built-in dual channel DC - OK signal and alarm relay contacts - Supports 1+1 and N+1 redundant systems - Isolated design for primary and secondary sides - Protection: overload protection, short circuit protection - Certifications: UL / EAC / CE / CB / UKCA - Long-term warranty of 3 years

• power supply
• converter
• Switching Power Supply

The PSD Series is a PCB (circuit board) type DC-DC converter.

The PSD Series is a PCB (circuit board) TYPE DC-DC converter. It is suitable for a wide range of applications as it is divided into three models with different input ranges. It is used in systems such as blood analyzers, railway instrument panels, factory automation, system control, embroidery machines, and oscilloscopes. Additionally, it is a DC-DC converter that can be used in harsh environments such as high vibration and extreme low or high temperatures. 【 Features 】 - Wide temperature range from -10℃ to +60℃ - Usable in harsh environments - Easy operation status check with LED indicators - Low ripple & noise - Protection: over-voltage protection, overload protection, short-circuit protection, reverse connection protection - Obtained standards: EAC / CE / UKCA - Long-term warranty of 2 years *For more details, please refer to the PDF materials or feel free to contact us.

• converter
• Other electronic parts
• Switching Power Supply

It has acquired railway planning and is ideal for applications such as railways and transportation! This DC-DC converter can be used in harsh environments, including high vibration and extreme low or high temperatures.

The RSD Series is a sealed DC-DC converter designed for railway applications. It is a product that can be used in harsh environments such as high vibration, low temperature, and high temperature. It has a wide input range and is suitable for many railway and various transportation systems. It is also adopted in onboard systems for railways, trams, special vehicles, emergency vehicles, as well as systems for robots and AGVs. 【Features】 - Complies with EN50155 and EN45545-2 railway standards - Compact 1U type (36mm) - Reinforced insulation with DC4000V I/O - Semi-sealed with cooling via free air convection - Built-in constant current limiting circuit - Easy-to-understand operational status confirmation with LED indicators - Low ripple & noise - Usable in harsh environments - Internal board coating - Protection: overvoltage protection, overload protection, short circuit protection, input reverse connection protection - Certifications: UL / AS/NZS / EAC / CB / CE / UKCA - Long-term warranty of 3 years *For more details, please refer to the PDF document or feel free to contact us.

• converter
• Other electronic parts
• Switching Power Supply

It can be used for various applications! It is a compact DC-DC converter with a large capacity.

The SD Series is a compact DC-DC converter. It is a product that can be used in harsh environments such as high vibration, low temperature, and high temperature. It is suitable for a wide range of applications as it is divided into three models with different input ranges. It is used in onboard systems for railways, special vehicles, emergency vehicles, as well as in systems like robots and AGVs. 【Features】 - Built-in EMI filter, low ripple noise - Adjustable output voltage - Usable in harsh environments - Protection: Overvoltage protection, overload protection, short-circuit protection, over-temperature protection - Standards obtained: AS/NZS / UL / EAC / CE / UKCA - Long-term warranty of 2 years *For more details, please refer to the PDF document or feel free to contact us.

• converter

Compact and multifunctional, useful with a variety of features!!

There are four types: RS: Single output RD: 2-channel output RID: Equivalent to RD with a separate output circuit RQ: 4-channel output RD/RID are widely adopted. A 2-in-1 type with a general AC-DC output that includes a 5V output!! What was designed as two units can now be one, allowing for space-saving installation.

• Switching Power Supply

DIN rail type AC-DC power supply Slim type "HDR" Balanced type "MDR" High capacity type "NDR"

【HDR】 Five types ranging from 15W to 150W, slim type that is user-friendly. 【MDR】 Five types ranging from 10W to 100W, with alarm signal output. 【NDR】 Four types ranging from 75W to 480W, this type is for large capacity. 【Applications】 ■ Industrial automatic machinery ■ Manufacturing equipment ■ Control panels *For more details, please refer to the PDF document or feel free to contact us. 【Contact Information】 ■ Phone: 03-6424-5005 ■ Email: info@earthpower.co.jp

• Switching Power Supply

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.