We will be exhibiting at the Mobakusho!

Thanks to its unique rubber suspension, it is possible to achieve a higher processing capacity and reduced noise levels compared to the company's spring suspension type! [Demo unit available]

This is a vibrating screening machine from Russell Finex, a leading overseas manufacturer of vibrating screening equipment. It is widely used in factories around the world for powder check screening. The device offers a rich variety of models and can be installed broadly in production processes. A significant feature of this device is that it uses a unique rubber suspension instead of a spring suspension for the screening damper. As a result, compared to the company's spring suspension models: - Capacity: Nearly double the processing capability - Noise: Low noise level (typically around 70 dB) - Cleaning: Can be disassembled and assembled without tools - No areas where water can accumulate, ensuring good drainage By simultaneously using the optional ultrasonic clogging prevention system (VDS), the screening capability for difficult powders that are prone to clogging is enhanced, preventing mesh damage (accurate classification down to a minimum of 20 µm). This device fits neatly into production lines, possesses advanced screening capabilities, and does not require overhead space. Thanks to clever design, it occupies less than half the height of the company's vibrating screening machines. We also have demo units available, so please feel free to consult us!

• Sieve/Shaker

A device that can automatically top nuts and granules accurately and quickly. [Demo unit available]

You can accurately and quickly top with fine materials such as nuts and granules. The sensor in the discharge section detects products flowing on the belt and fills the topping materials. The internal sensors of the device constantly check the remaining amount in the topping storage tank and replenish it as needed when it runs low. With a minimum of 8 rows and a maximum of 20 rows, it allows for multi-row filling, significantly improving the efficiency of processes that were previously done manually. This device makes tasks that used to be time-consuming and labor-intensive much easier.

• Food Processing Equipment
• Other food machinery

A food printer that can accurately fill sauces and liquids without dirtying the belt.

You can accurately print your preferred design or pattern on the product. A patented sensor detects the product, allowing for precise filling of liquids and sauces. It applies the material from edge to edge without spilling. As a result, it is possible to keep the belt clean without getting it dirty. This also helps prevent waste of raw materials, making it recommended for cost savings and reducing food loss. It can also be used as a depositor.

• Food Processing Equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.