Easy Illustrated Procedure Manual for EMI Noise Measurement

"EMI Noise Measurement Operation Guidebook" by a spectrum analyzer with a built-in preamplifier for just 162,000 yen (campaign price).

This is an operation manual for engineers who do not usually use spectrum analyzers, specifically for measuring EMI noise. It is a guide (with illustrations) for operating the RIGOL DSA815. - Principles of Spectrum Analyzers - Comparison with Oscilloscopes - Block Diagram for Understanding Spectrum Analyzers - Operating Procedures for EMI Noise Measurement The RIGOL DSA815 is available at a 40% discount as part of the "Inventory Clearance Spring Campaign," with a regular price of ¥270,000 now at ¥162,000 (excluding tax). It comes with a standard 3-year warranty and is available for immediate delivery. https://jpmall.rigol.com/content-news-detail.html?article_id=82

• Other electronic measuring instruments

The DSA800 series spectrum analyzers are equipped with solutions that are well-suited to meet your RF analysis needs.

A versatile device that provides a wireless frequency (RF) analysis solution with excellent accuracy and noise performance, suitable for general spectrum analysis, RF recording/replay, EMC compliance testing/troubleshooting, spectrum monitoring, radio wave detection, and interference signal detection. - Frequency range: 1.5GHz / 7.5GHz - Maximum real-time bandwidth (RTBW): 10Hz to 1MHz - Minimum displayed average noise level (DANL): -161dBm - EMI pre-compliance measurements - Tracking generator and VSWR function - Comfortable operation and confirmation with a 10.1-inch touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• Logic Analyzer

Three-year warranty for all models! Introducing a wide range of electronic measuring instruments such as oscilloscopes and digital multimeters.

This catalog features a wide range of electronic measuring instruments handled by Rigol Japan LLC. Starting with the "DS1000Z Series," which displays automatic measurement results in graph or table format as history, we also introduce the "RSA3000/5000 Series" real-time spectrum analyzers, as well as the "DSG800 Series" and "DG800/900 Series." Product features and photos are also included, so please take a look. [Contents] ■ Oscilloscopes ■ Real-time/Spectrum Analyzers ■ RF Signal Generators ■ Arbitrary Waveform/Function Generators ■ Digital Multimeters ■ Programmable DC Power Supplies/DC Electronic Loads ■ Accessories *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

The RSA3000 series real-time spectrum analyzers offer the best solutions for your RF analysis needs.

A wireless frequency (RF) analysis solution equipped with excellent accuracy and noise performance, ideal for general spectrum analysis, RF recording/replay, EMC compliance testing/troubleshooting, spectrum monitoring, radio wave detection, and interference signal detection. ■ Frequency bands: 1.5GHz / 3GHz / 4.5GHz Maximum real-time bandwidth (RTBW): 10MHz to 40MHz ■ Minimum displayed average noise level (DANL): -165dBm ■ Minimum 100% signal capture probability (POI): 7.45µs ■ EMI pre-compliance measurement ■ Tracking generator and VSWR function ■ Comfortable operation and confirmation with a 10.1-inch touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• Logic Analyzer

The RSA3000E series real-time spectrum analyzers offer the best solutions for your RF analysis needs.

We provide a wireless frequency (RF) analysis solution equipped with excellent accuracy and noise performance, ideal for general spectrum analysis, RF recording/replay, EMC compliance testing/troubleshooting, spectrum monitoring, radio wave detection, and interference signal detection, all in one device. - Frequency bands: 1.5GHz / 3GHz / 4.5GHz - Maximum real-time bandwidth (RTBW): 10MHz to 40MHz - Minimum displayed average noise level (DANL): -165dBm - Minimum 100% signal capture probability (POI): 7.45µs - EMI pre-compliance measurement - Tracking generator and VSWR function - Comfortable operation and confirmation with a 10.1-inch touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• Time-frequency measurements

The RSA5000 series real-time spectrum analyzers offer solutions well-suited to meet your RF analysis needs.

The RSA5000 Real-Time Spectrum Analyzer features real-time measurement and sweep measurement, optional Vector Signal Analysis (VSA) application software, and EMI measurement application software (EMI), providing excellent performance and specifications. The frequency range is from 9 kHz to 6.5 GHz (RSA5065), and there is also a "-TG" model with a tracking generator, making it widely applicable in fields such as corporate research and development, production lines, and education. *For more details, please refer to the PDF materials or feel free to contact us.*

• Time-frequency measurements

(Limited model campaign until the end of June) High-performance mixed signal oscilloscope of the UltraVision II technology generation.

A high-performance mixed signal oscilloscope equipped with a self-developed chipset featuring class-leading sampling and memory length, suitable for embedded design, power analysis, serial decoding, RF applications, jitter and eye pattern analysis, and more. - Frequency range: 600MHz / 1GHz / 2GHz - Sampling rate: up to 10G samples/second, memory length: up to 500M points, waveform capture rate: 600,000 wfms/s - Standard equipped with serial bus trigger & decode - Eye pattern analysis included - Integrates seven types of measurement instruments into one - Comfortable operation and confirmation possible with a 10.1-inch touchscreen * For more details, please refer to the PDF document or feel free to contact us. Until the end of June, we are running a free upgrade campaign for the MSO8064 model from 600MHz to 1GHz. For campaign details, demo units, or quotes, please contact us at the email below. Email: liangpeng@rigol.com

• oscilloscope

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.