Featured in the May issue of 【Sonaer】 Product Navigator.

A new challenge with the Sonia Corporation's low-flow ultrasonic spray nozzle!

Low Flow Ultrasonic Spray Nozzle (Atomizer) The low flow spray nozzle (atomizer) manufactured by Sonia is designed to apply droplets (particles) of various viscosities in micron and submicron sizes without over-applying them to small parts. The nozzle shape comes in two types: flat and wide nozzle tips. It is suitable for concentrated application using an ultrasonic spray nozzle and a pinpoint air transport fixture (custom order), as well as for transporting very small droplets (particles). These spray nozzles can be easily applied to applications where coating control and uniform film are required. The spray nozzle is lightweight and ideal for coating systems using robots. The main body of the spray nozzle is made of stainless steel. *Custom micro feed tubes are suitable for low flow application and are available in stainless steel or PTFE fluororesin. The spray nozzle can be equipped with a spray shaper for pinpoint spraying or a wider spray for better coating control. *Micro feed tubes are optional.

• nozzle
• Other machine elements
• Other physicochemical equipment

Spraying fine particles without pressure! Atomization through the vibration of piezoelectric ceramics!! Low power consumption and low energy costs!!

Ultrasonic waves generated by piezoelectric ceramics are transmitted to the spray nozzle (atomizer), where they vibrate the liquid film to create extremely fine particles for spraying. Liquid can be supplied and sprayed into fine particles without the need for pressurization. The flow rate varies depending on the model, but it can accommodate a wide range from a minimum flow rate of 10 ml/min to a maximum of 100 ml/min. Since pressure is not applied to the liquid, there is very little splatter or rebound, eliminating waste of the applied liquid. Additionally, there is no need for a large painting booth. This achieves a reduction in capital investment and running costs. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia Corporation.

• Ultrasonic Oscillator
• nozzle
• valve

Designed for ultra-low flow rates of 1 ml/min or less.

The stainless steel micro feed tube made by Sonia is designed for extremely low flow rates of less than 1 ml/min. *Of course, it can also be used at flow rates above 1 ml/min. The liquid flows through without touching the tip, which forms a uniform particle size. *This product is an accessory specifically for Sonia's ultrasonic spray nozzle.

• nozzle
• spray
• others

A fixture for spreading wider than a wide-angle air transport fixture.

Dove Tail Spray Shaper The Dove Tail Spray Shaper is an air transport fixture, ideal for wide-angle spraying and flux coating. It can be used with all spray nozzles of NS and WS types. By changing the position of the Dove Tail Spray Shaper, it is possible to switch from a fan-shaped spray pattern to an elliptical spray pattern. *This product is a dedicated accessory for the ultrasonic spray nozzles manufactured by Sonia Corporation.

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

Designed for fluids that have a strong impact on stainless steel, such as pharmaceutical-related applications.

The Sonia Corporation's PTFE fluoropolymer microfeed tube is designed specifically for fluids that have a strong impact on stainless steel, particularly for pharmaceutical-related applications. The liquid must be completely isolated for reasons of hygiene and chemical reactions. *This product is an accessory specifically for Sonia Corporation's ultrasonic spray nozzle.

• nozzle
• Water Hydraulic Equipment
• others

A fixture for applying particles sprayed from an ultrasonic spray nozzle over a wide area.

The wide-angle air transport fixture is a device that uses gas or air to expand the spray angle. The wide-angle air transport fixture can be attached to the Narrow Spray models 60K50T and 130K50T. There is an air supply port on the side of the wide-angle air transport fixture. By injecting gas or air, the gas or air circulates inside, causing the particles sprayed from the ultrasonic spray nozzle to spread and be pushed out. By adjusting the gas volume, air volume, pressure, and the tip of the ultrasonic spray nozzle, a spray angle of up to approximately 100° can be achieved. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia.

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

The Sonia Corporation's ultrasonic particle size generator transforms liquids into fine particles!

The ultrasonic particle generator transforms low-viscosity liquids into fine particles. Our company's compact 2.4MHz NO model 241T uses a Teflon-coated nebulizer. This device is fully microcontroller-based, allowing users to program operating parameters while handling various applications for actual particle generation. The front panel is equipped with an LCD that enables users to vary the particle generation rate from 0% to 100% in 5% increments. For special processes, such as applying small parts, a device is incorporated that can adjust the flow rate between 0-2 cfm to move particles out of the vessel where they are created. This air source and all other connections feature easily removable 304SS fittings and Teflon O-rings, allowing for easy adaptation to cleaning, external gas supply, or vacuum connections. The 304SS Tee (also available with Teflon coating) is designed to trap particles, with a small amount of airflow/gas/vacuum used to move particles from the device.

• Ultrasonic Oscillator
• Other physicochemical equipment
• others

Flow spray of 2 mmlit/min or less is possible!

Sonaer low-flow spray nozzle manufactured by Sonia Co. It can focus on small parts without waste by creating micron and sub-micron particles. There are two types of nozzles: flat and wide spray tips. These nozzles are ideal for pinpoint spray shaping, focusing particles and minimizing solution waste. With these nozzles, coating control becomes possible, easily adapting to applications that require thin and uniform application. This nozzle is lightweight, making it attractive for use in robotic coating systems. The nozzle comes in a lightweight black aluminum case (custom-made) or a stainless steel case with a stainless steel inner feed tube. The micro feed tube can be used for microliter capacities and is available in stainless steel and PTFE. The nozzle can utilize a spray shaper for pinpoint spraying, allowing for better control of your coating applications.

• nozzle
• valve
• Etching Equipment

Designed to use fast-reacting liquids and capable of stirring in a short time!

The Sonia dual micro feed tube is designed to use fast-reacting liquids and can be stirred in a short amount of time. The material is stainless steel. The dual micro feed tube has two liquid supply ports, one at the top and the other on the side. *This product is a dedicated accessory for Sonia ultrasonic spray nozzles.*

• nozzle
• others

Air transport fixture for spraying in a square or rectangular shape.

This is an air transport device designed to spray particles from an ultrasonic spray nozzle in a square or rectangular shape. Its main application is for coating purposes. By adding a small amount of gas or air, it applies to square, rectangular, or flat substrates. By adjusting the distance from the workpiece and the pressure of the transport gas or air, various sizes and shapes of spray patterns can be achieved with the ultrasonic spray nozzle manufactured by Sonia. *This product is a dedicated accessory for the ultrasonic spray nozzle made by Sonia.*

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

It precisely sprays fine particles!

The pinpoint air transport fixture generates high-quality, fine particles and can uniformly apply them to medical coatings and other small precision devices. The spray speed is slow, making it suitable for applying expensive chemicals in a thin layer with minimal use. It excels not only in coating and manufacturing applications for medical precision instruments but also in uses such as stent coating and catheter coating, providing excellent reproducibility of spray speed and particle diameter, while significantly reducing the consumption of the coating agent. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia Corporation.*

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

It is a subcutaneous solvent delivery device that can coat evenly and thinly.

Sonia's hypodermic needle spray attachment allows for precise and uniform thin coating, generating high-quality fine particles in a relatively narrow range. It is suitable not only for improving biocompatibility and drug delivery but also for preventing restenosis and thrombosis. It prevents clogging, provides uniform film thickness and density with low-speed application, and reduces wasteful coating. *This product is a dedicated accessory for Sonia's ultrasonic spray nozzle.*

• Ultrasonic Oscillator
• nozzle
• spray

Atomize the coating liquid with piezo vibration! Minimal splatter and rebound without pressure! Compatible with a wide range of flow rates.

The Sonia Corporation's "Ultrasonic Spray Nozzle" utilizes piezoelectric vibrations to vibrate liquids. It forms fine particles and sprays them. It can accommodate a wide range of liquid flow rates from 10 mL/min to 100 mL/min, and since it does not apply pressure to the liquid, it features minimal splatter and rebound. There is no waste of the application liquid, and a large booth is not necessary. It is suitable for applications such as coating, humidifying, and disinfecting. 【Features】 - Resistant to clogging and has high operational safety - Uniform ultrasonic atomization regardless of liquid flow rate - Low power consumption and inexpensive running costs - Available in two types: wide spray and narrow spray. ★ We are currently offering a demo unit for you to try out! ★

• Other processing machines

A collaborative product of Rehila's nozzle technology and Sonosys's ultrasonic technology.

Particles (droplets) formed by the ultrasonic spray nozzle are broken up by the vibrations of the piezo element. In other words, unlike pressurized systems, the particles do not have speed. As a result, they either fall naturally or float due to the influence of the wind. Therefore, carrier air is used to transport the formed particles for application.

• Ultrasonic Oscillator
• nozzle
• Coating Machine

Atomization of liquid without pressurization by piezo vibration. Enables uniform application while reducing power consumption and liquid waste.

Ultrasonic waves are transmitted to the nozzle through the vibration of piezoelectric ceramics, vibrating the liquid film to form and spray fine particles. It can handle a wide range of liquid flow rates from a minimum of 10 ml/min to a maximum of 100 ml/min, with a nearly constant particle size across the entire flow range. ◆Product Features◆ - Energy-saving as it can supply liquid with low power without pressurizing - Uniform atomization regardless of flow rate - Nearly constant particle size across the entire flow range - Resistant to clogging, ensuring high operational safety - Good coating efficiency due to the slow self-velocity of particles - Maximum flow rate for standard specifications is 100 ml/min - Operating frequency ranges from 20 to 130 kHz (varies by model) - Outer particle size ranges from 11.8 to 42 μm (varies by model) ◆Accessories◆ By using an air transport device, it is possible to freely change the spray shape of the applied fine particles (droplets). ◆Liquid Delivery Pump◆ Precise control is possible by using a syringe pump or similar for liquid delivery. ≪Key Point≫ Demo units are available for loan, so please feel free to contact us. ※※Ultrasonic Cleaning Equipment※※ Sonosis also manufactures and sells ultrasonic cleaning equipment.

• CMP Equipment
• spray
• Coating Machine

We will achieve a reduction in equipment investment and running costs.

The ultrasonic spray nozzle (atomizer) transmits vibrations from the piezoelectric ceramic, causing the liquid film to vibrate and forming fine particles for spraying. Liquid is supplied without pressure, allowing for the spraying of fine particles. It accommodates a wide range of liquid flow rates from a minimum of 10 milliliters per minute to a maximum of 100 milliliters per minute. Since no pressure is applied to the liquid, there is very little splatter or rebound, eliminating waste of the coating liquid and making large painting booths unnecessary.

• Ultrasonic Oscillator
• nozzle
• Other processing machines

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

In facilities operating nurse call systems, we have made bed exit sensors wireless, allowing them to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensors wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ Bed exit sensors wirelessly notify in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.