Data acquisition from RIGOL MSO7054 digital oscilloscope using LabVIEW.

High-performance mixed signal oscilloscope of the Ultra Vision II technology generation.

Equipped with class-leading sampling and memory length, this high-performance mixed signal oscilloscope, featuring a self-developed chipset, is ideal for embedded design, power analysis, serial decoding, and RF applications. ■ Frequency range: 100 / 200 / 350 / 500 MHz, Sampling rate: up to 10G samples/second, Memory length: up to 500M points, Waveform capture rate: 600,000 wfms/s ■ Standard equipped with serial bus trigger & decode ■ Integrates seven types of measurement instruments into one ■ Comfortable operation and confirmation possible with a 10.1-inch touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

Mixed Signal Oscilloscope MSO5000 Series with Excellent Cost Performance

The MSO5000 series digital oscilloscope is a high-performance and economical digital oscilloscope of the UltraVision II technology generation. Equipped with class-leading sampling and memory length, it features a self-developed chipset that enables high-functionality measurements as a mixed signal oscilloscope. ■ Frequency bandwidth: 70 / 100 / 200 / 350 MHz Sampling rate: Up to 8G samples/second Memory length: Up to 200M points Waveform capture rate: 500,000 wfms/s ■ Serial bus trigger & decode standard equipped ■ Integration of seven types of measurement instruments into one ■ Comfortable operation and confirmation possible with a 9-inch touchscreen *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

A budget model with rich features while emphasizing performance. An ideal device for education, electronics projects, embedded design, and power analysis.

■ Frequency range: 50 / 70 / 100 MHz, Sampling rate: up to 1G samples/second, Memory length: up to 24M points ■ Standard equipped with serial bus trigger & decode ■ Built-in 25MHz signal generator (optional) ■ Hardware waveform recording & replay ■ Price: 51,800 yen ~ *For more details, please refer to the PDF document or feel free to contact us.

• oscilloscope

(Limited model campaign until the end of June) High-performance mixed signal oscilloscope of the UltraVision II technology generation.

A high-performance mixed signal oscilloscope equipped with a self-developed chipset featuring class-leading sampling and memory length, suitable for embedded design, power analysis, serial decoding, RF applications, jitter and eye pattern analysis, and more. - Frequency range: 600MHz / 1GHz / 2GHz - Sampling rate: up to 10G samples/second, memory length: up to 500M points, waveform capture rate: 600,000 wfms/s - Standard equipped with serial bus trigger & decode - Eye pattern analysis included - Integrates seven types of measurement instruments into one - Comfortable operation and confirmation possible with a 10.1-inch touchscreen * For more details, please refer to the PDF document or feel free to contact us. Until the end of June, we are running a free upgrade campaign for the MSO8064 model from 600MHz to 1GHz. For campaign details, demo units, or quotes, please contact us at the email below. Email: liangpeng@rigol.com

• oscilloscope

Three-year warranty for all models! Introducing a wide range of electronic measuring instruments such as oscilloscopes and digital multimeters.

This catalog features a wide range of electronic measuring instruments handled by Rigol Japan LLC. Starting with the "DS1000Z Series," which displays automatic measurement results in graph or table format as history, we also introduce the "RSA3000/5000 Series" real-time spectrum analyzers, as well as the "DSG800 Series" and "DG800/900 Series." Product features and photos are also included, so please take a look. [Contents] ■ Oscilloscopes ■ Real-time/Spectrum Analyzers ■ RF Signal Generators ■ Arbitrary Waveform/Function Generators ■ Digital Multimeters ■ Programmable DC Power Supplies/DC Electronic Loads ■ Accessories *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

An online seminar that is helpful for not only science and engineering students and new engineers but also veteran engineers, providing insights that are "eye-opening."

RIGOL Online Seminar https://jpmall.rigol.com/ (Seminar videos available from the middle section onward) Session 1: The Role Distribution of Digital Multimeters and Oscilloscopes Session 2: How to Choose an Oscilloscope with What Frequency Bandwidth in MHz Session 3: Measurement Starts with Probe Preparation Session 4: The Mechanism of Probes Session 5: How to Determine Voltage Sensitivity to Maximize Performance Session 6: How to Determine Time Settings to Maximize Performance - The Impact of Sample Rate

• oscilloscope

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will exhibit at the "Japan Pavilion" established by the Ministry of the Environment at the 30th Conference of the Parties to the United Nations Framework Convention on Climate Change (COP30), which will be held in Belém, Brazil, from November 10, 2025. "SPACECOOL" is a radiative cooling material that enables zero-energy cooling by dissipating heat into space. At our exhibition booth, we will showcase examples of its use not only in reducing air conditioning energy in buildings but also in heat mitigation measures (adaptation strategies) for tents and parasols. The Japan Pavilion aims to promote excellent technologies, products, and services that support global decarbonization and adaptation to climate change, and to achieve Japan's long-term climate change goal of "net zero by 2050." We believe that our participation plays an important role in this endeavor. Through this exhibition, we aim to accelerate our initiatives with local partners in regions severely affected by heat issues, such as the Middle East, including Saudi Arabia and the United Arab Emirates, as well as Southeast Asia, contributing to global decarbonization and climate change measures.

Castem Co., Ltd. will exhibit at the "Monozukuri World Osaka - Mechanical Components Technology Exhibition" held at Intex Osaka from October 1 (Wednesday) to October 3 (Friday), 2025. We will showcase lost-wax precision casting and MIM (Metal Injection Molding) products, as well as introduce our new technology, mold-less casting "Digital Cast." In addition to our popular casting demonstrations, we will present case studies that solve issues related to metal parts. Please utilize our "Technical Consultation Booth" to learn about optimal manufacturing methods tailored to your needs, from ultra-small lots to mass production. 【Exhibition Overview】 Dates: October 1 (Wednesday) to October 3 (Friday), 2025, 10:00 AM to 5:00 PM Venue: Intex Osaka (1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture) Exhibition Booth Number: Hall 6, B Hall 51-1 Pre-registration allows for smooth entry. It is convenient to register via the URL below before your visit. We sincerely look forward to your attendance. https://www.manufacturing-world.jp/osaka/ja-jp/register.html?code=1431877272389396-VEK