We will exhibit at the exhibition!

Automatic measurement of the current state of slopes and landslides, as well as the condition of structures, using "points" and "surfaces." Achieving 24-hour automatic monitoring.

The 3D surface measurement system "DAMSYS-Hybrid" scans the measurement monitoring area with a Leica multi-station and visualizes the results on-site. It can simultaneously acquire data from both "points" via prism reflection and "surfaces" through 3D scanning, allowing for rapid understanding of unexpected behaviors. The behavior of slopes and ground can be managed in both the "vertical direction" and the "direction perpendicular to the slope's inclination," enabling automatic detection of displacements over a 24-hour period.

• 3D measuring device

Improvement of safety during crane operations / Management in a three-dimensional area to prevent intrusion into restricted zones and manage distance from surroundings.

―Introduction to the Option System― 【On July 12, 2024, the MR visualization system for the option system has resumed sales!】 This system uses the technology of "GyroEye" developed by Informatics Co., Ltd. to project an area set with a "3D barrier" as a hologram in real size into the real world. 【Supported Devices】 Microsoft HoloLens 2, Trimble XR10 【Supported Data Formats】 DWG, DXF, IFC * To use this option system, registration for the dedicated app "GyroEye Web Data Converter" to convert CAD data into MR data is required. * The 3D barrier and the WEB Data Converter have different coordinate systems, so they do not match perfectly. * There may be instances where it does not operate correctly due to weather conditions. * Depending on the site environment and weather conditions, it may not be possible to achieve high-precision projection. * GyroEye is a registered trademark of Informatics Co., Ltd. * For more details on the MR visualization system, please refer to the catalog.

• Area Sensor
• Safety Controller
• Safety Sensors

Visually manage the position and tilt of the piles to achieve high-precision pile driving. It can also be viewed remotely via a web browser.

"Pile Navi Cloud-V" is a system that enables high-precision pile driving construction while confirming the position and inclination of piles using a non-prism total station. When displaying the differences between design values and measured values in both numerical and visual formats, it can be checked on an in-vehicle monitor or a remote web browser (K-Cloud). Information such as the amount of deviation from the start to the end of measurement is automatically saved. It can be implemented according to site needs, such as with three-point heavy machinery or all-casing methods. 【Features】 ■ NETIS registered (Number: KT-220168-A) ■ Compatible with precast piles and cast-in-place piles ■ Improved accuracy and safety through system management *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• 3D measuring device

Features: ●Core 3 N355/N150 ●DDR5 SODIMM x 1 (up to 16GB) ●HDMI 1.4, VGA, LVDS ●2.5GbE x 3, SATA 6Gb/s, GPIO 8-bit ●USB 3.2 Gen 2 x 2, RS-232/422/485 x 2, RS-232 x 2 ●Mini PCIe x 1, M.2 2230 E-Key x 1, M.2 3052 B-Key x 1 ●DC input 9V～36V

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x 1, eDP x 1, DP x 1, HDMI x 1 ● LAN x 3, SATA 6Gb/s x 1, 8-bit GPIO ● USB 3.2 Gen2 x 2, USB 2.0 x 4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x 1, M.2 2230 E-Key x 1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.

Our company will be exhibiting at the "28th IoT & Edge Computing Expo [Spring]" within Japan IT Week, which will be held at Tokyo Big Sight from April 8 (Wednesday) to April 10 (Friday), 2026! We will showcase an AI compact edge PC equipped with NVIDIA's Jetson Thor, boards and PCs featuring Intel's Panther Lake and Bartlett Lake, a vending machine-type demo using ARM boards, as well as touch panel PCs, tablet PCs, and other peripheral devices. ■ Dates: April 8 (Wednesday) - April 10 (Friday), 2026 ■ Hours: 10:00 AM - 6:00 PM (until 5:00 PM on the final day) ■ Venue: Tokyo Big Sight, West Hall 3 ■ Booth Location: W22-22 You can register for your visit at the URL below. We sincerely look forward to your attendance. https://www.japan-it.jp/spring/ja-jp/register.html?code=1606569853287533-WSW

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)