Notice of advertisement publication in the June 22, 2023 issue of the Nikkan Kogyo Shimbun.

A grease injector convenient for the maintenance of air equipment; simply insert it into the intake part and rotate to improve product durability and maintain performance.

"Grease Up Series" Grease Up (Grease Supply Device / Grease Lubricator / Grease Injector GRU "Benefits" ● Leads to a reduction in maintenance costs ● Can be directly fixed to the lubrication part for easy oiling ● Reusable by simply replenishing grease ● Compatible with our air motor type factory fans (some other brands may also be used) "Features" ● Recommended usage amount allows for lubrication with 2 rotations per use ● Grease content is sufficient for 4 rotations (3.8cc) ● 0.47CC per rotation

• Filling and bottling machines

Non-sticky! Refreshing, smooth mist. Ideal mist fan for heatstroke and static electricity prevention in areas where open flames are prohibited.

**Merits** - Maximum cooling of minus 8 degrees (−8℃) improves work efficiency in high-temperature and high-humidity environments - Continuous operation possible - Safe to use in explosion-proof areas as the power source is air - High water-saving function allows for usage while conserving water - By adjusting the valve opening, it can operate for about 8 hours on 1 liter **Features** - Dedicated container included as a substitute for the tank - Water supply tank compatible with large 10-liter types and servers - Circulator and oscillation function enable wide-area cooling, ventilation, and air blowing - Mist and airflow adjustment with a needle valve - Two types available, 18 type and 24 type, depending on the "site" or "application"

• Oil Mist Collector

No oil supply required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFG-18NL ◎ Equipped with a non-oil air motor ◎ Adjustable angle "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various models and sizes to choose from according to the usage location ● Stepless adjustment of rotation speed using the air valve throttle ● Stable construction that is difficult to topple ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-oil air motor ● Stable construction that is difficult to topple ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0 to 60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• air conditioning

No oil refilling required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFF-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle ◎ Floor type "Benefits" ● Long-life motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various types and sizes available to match the usage location ● Stepless adjustment of rotation speed using air valve throttling ● Stable construction that is difficult to tip over ● No oil required without a lubricator ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heat stroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0-60 degrees (°C)) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil refilling is required with lubricators. Equipped with a maintenance-free air motor.

"Fan Series" AFK-18NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Wall-mounted "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Various models and sizes to choose from based on usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function ● Equipped with a non-lubricated air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation in underground LP gas tanks, as a replacement for explosion-proof fans, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil supply required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFD-18NL ◎ Equipped with oil-free air motor ◎ Adjustable angle ◎ Desktop type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas as it is powered by air ● Various types and sizes available to suit the usage location ● Stepless adjustment of rotation speed by throttling the air valve ● Stable construction that is difficult to tip over ● No oil required, operates without a lubricator ● Noise reduction of approximately 5% ● Air consumption reduced by 5% * Compared to our conventional products "Features" ● Oscillating function ● Equipped with oil-free air motor ● Stable construction that is difficult to tip over ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high temperature and humidity (Temperature: 0-60 degrees Celsius) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automotive transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation in LP gas and underground tank stands, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil supply required with lubricators. Uses a non-lubricated air motor.

"Fan Series" AFG-24NL ◎ Equipped with a non-lubricated air motor ◎ Adjustable angle ◎ Large 24-inch stand type "Benefits" ● Long-lasting motor capable of continuous operation ● Can be used in explosion-proof areas due to air as the power source ● Models and sizes can be selected according to the usage location ● Stepless adjustment of rotation speed with air valve throttling ● Stable construction, difficult to topple ● No oil required, no lubricator needed ● Approximately 5% reduction in noise ● 5% reduction in air consumption * Compared to our conventional products "Features" ● Oscillating function included ● Equipped with a non-lubricated air motor ● Stable construction, difficult to topple ● Adjustable angle "Applications" ● Heatstroke prevention ● Efficiency improvement in drying operations ● Usable in high temperature and humidity (Temperature: 0-60 degrees (°C)) * Please consult separately for other environmental conditions "Field" Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for LP gas and underground tank areas, and installation in manholes on ships and decks.

• Ventilation and Exhaust

No oil refilling required with lubricators; equipped with a maintenance-free air motor for powerful performance! Speedy ventilation!

"Oil-Free Air Axial Flow Fan and Blower Series" AFR-08NL/AFR-12NL ◎ Equipped with an oil-free air motor Can be used without oil and without a lubricator. It features a long-lasting motor capable of continuous operation, suitable for use in explosion-proof areas. ◎ An essential item for explosion-proof and heat hazard areas! Ventilation for infection control! Because it is air motor-driven... Point 1: Lightweight! Up to 1/4 the weight of electric pressure-resistant explosion-proof blowers (compared to other manufacturers' 12-inch model axial flow fans weighing 25.5 to 37.5 kg) Point 2: Safe and secure without using power! Point 3: Fewer failures! Can be used as a circulator. 《Applications》 ● Heatstroke prevention ● Infection control measures for COVID-19 and other diseases ● Efficiency improvement for drying operations ● Air circulation in high-temperature areas and drying rooms ● Usable in high-temperature and high-humidity environments (Temperature: 5-40°C) *Please consult separately for other environmental conditions 《Field Use》 Not only for factories such as chemical plants, painting factories, automobile transport ships, and shipyards, but also for various applications such as tunnel construction, ventilation for underground LP gas tanks, replacing explosion-proof fans, and installation in manholes on ships and decks.

• Ventilation and Exhaust

Realizing Precision Control in Energy Innovation Hydrogen, fuel cells, CCUS, biofuels, CNT manufacturing. There are technologies on-site that monitor precise flows to support the energy of the future. Brooks Instrument's flow meters support the energy transition.

As a result of struggling every day without implementing AI, there has been an increase in companies exhausted from overtime recently. When you hear "AI implementation," you might imagine a large investment or a company-wide reform. However, what is needed now is not to **“change everything at once,” but to “first make one thing easier.”** For example, just having AI do a little bit of the work, such as inputting handwritten forms, drafting complaint emails, or summarizing meeting notes, will definitely reduce the workload. Delivered through a blog and audio! Of course, it's free. The link is below, scroll down.

Robatech is adding two more all-rounders to the Alpha adhesive melter series with the new Alpha S Pro and Alpha M Pro versions. The Pro devices can accommodate adhesive processes using up to six application heads in the packaging, processing, and graphic industries. "The Pro versions of the Alpha series, equipped with two types of melting tank capacities (4.1 liters, 6.8 liters) and melting speeds (8kg/h, 12.5kg/h), are ideal for adhesive application processes in the packaging, processing, and graphic industries," explains André Laubacher, Product Manager for Small Units at Robatech. "Since its launch in April 2025, the Alpha S has built a strong track record in the market. Therefore, I am confident that the efficient and powerful Pro version will be highly valued by our customers, even in fast and complex applications."

In celebration of our 50th anniversary, we have produced a short heritage movie that conveys the essence of Robatech. It reflects our attitude, vision, and our goal of making our customers' daily production activities easier—showcasing our commitment to reliability and trustworthiness. Immerse yourself in the world of Robatech and experience how our values have guided us from 1975 to the present and into the future. Trust, innovation, and solid reliability have been our guiding principles since our founding in 1975. These values elevate Robatech beyond being just a technology provider. We are a partner that offers our customers peace of mind and simplifies their daily operations. Our history demonstrates that values passed down over decades are the key to building a shared future. With passion, sustainability, and innovation, we create solutions that provide our customers the freedom to focus on what matters most. Please watch the heritage movie on our website/news site.

In 2025, M&M Corporation began selling the "MMG200 Series," a compatible quick coupling for molds in the DME Zifitite 200 series. This new series is characterized by its compatibility with the DME standard 200 series (Zifitite), which is widely used both domestically and internationally, allowing for a smooth replacement of conventional products. Furthermore, the cost performance is noteworthy. While maintaining high-quality finishes and reliability, the price has been significantly reduced compared to genuine products. For manufacturing sites where cost reduction is essential, it truly represents a "handy" option. The MMG coupling optimizes the balance of durability, sealing, and operability by adopting a brass body with a stainless steel locking mechanism. It supports various screw sizes, including PT1/8, 1/4, and 3/8, making it widely compatible with both mold water lines and oil temperature control lines. 【Implementation is progressing in the following environments】 ✅ Water cooling circuits for press molds and injection molding machines ✅ Compatibility applications with overseas DME standard molds ✅ Sites struggling with inventory and delivery times of existing DME couplings ✅ Sites looking to reduce costs and unify parts