◇Resale Start◇ The small rechargeable temperature and humidity logger "SCHM-1" is back in stock!

We offer a lineup of distinctive products, including flexible types that are effective for measuring temperature and humidity in narrow spaces with a sensor thickness of 1mm, as well as pressure-resistant and waterproof types!

We sell data loggers that utilize high-precision temperature and humidity sensors. We are now able to offer a sensor cable that combines a 1mm thick compact sensor from Sensirion with a 200μm flexible cable. This flexible type can be used in narrow and extremely small spaces. It is equipped with a membrane filter that is resistant to condensation, and the humidity accuracy is ±1.5% RH, making it highly precise. It can be combined with various data loggers for measurement. 【Features】 ■ Sensor thickness: 1mm; Flexible cable thickness: 200μm ■ Flexible cable length: 180mm; Total cable length: 1 to 10m ■ The flexible cable section is detachable and replaceable ■ Heat-resistant flexible cable adopted *Our company also offers standard sensor cables that perform well in various situations, as well as waterproof and pressure-resistant temperature and humidity sensor cables that can be used in harsh environments. ◎ For more details, please visit our website. https://syscom-corp.jp/

• Temperature and humidity measuring instruments
• Thermo-hygrometer

We implemented a 1.5mm square sensor element onto our proprietary substrate and assembled it into a cable!

The ultra-compact SHT35 temperature and humidity sensor cable has arrived. It achieves ultra-high precision of ±1.5% under normal environmental conditions. Due to its small sensor size, it can measure in tight spaces. The standard board type has a sensor tip size of 4×15 mm. The cable length is available from 1 to 10 meters. It can be connected to our loggers for use.

• Temperature and humidity measuring instruments
• Thermo-hygrometer
• Other temperature and humidity measuring instruments

Effective in high humidity environments! This sensor, equipped with a sintered metal filter, is suitable for temperature and humidity measurements in harsh conditions such as condensation.

This is a capacitive temperature and humidity sensor that can be measured even when submerged in water. We have assembled this sensor into a cable at our company. 【Features】 - Humidity range: 0-100% RH - Humidity accuracy: ±1.8% - Temperature range: -15℃ to 105℃ - Temperature accuracy: ±0.2℃ @ 25℃ - Temperature and humidity response: approximately 10 seconds (HYT939-1M/2M/3M/5M/10M) Please connect this sensor cable to our logger for use.

• Temperature and humidity measuring instruments
• Thermo-hygrometer
• Data Logger

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

What is an Air Leak Tester? An "Air Leak Tester" is a device that pressurizes the inside (or outside) of a sealed workpiece with air and determines the presence of leaks based on pressure changes. When a master with no leaks and a workpiece with leaks are pressurized, the pressure on the workpiece side decreases, creating a pressure difference between the two. By measuring this pressure difference, the presence of leaks can be determined. Generally, differential pressure air leak testing is widely used, but Fukuda also offers products that utilize direct pressure leak testing and flow meters according to the leak rate, in addition to differential pressure leak testers. Since the air leak tester uses air as the measurement medium, it incurs no running costs and is environmentally friendly.