Adopted by HTV and artificial satellites: You Corporation's 'Ultra-Precision Cutting Technology'

Numerous machining achievements with a tolerance of 0.001mm! We accept cutting processing from aluminum and stainless steel to difficult-to-machine materials in the aerospace and medical fields!!

At You Corporation, we realize 5-axis machining and complex turning processing of difficult-to-cut materials (such as titanium, Inconel, Kovar, Super Invar, etc.) using aluminum and stainless steel, backed by extensive know-how and high-precision machines! We can also handle all types of resin processing (including ABS, PC, POM, PMMA, acrylic, PPS, PP, PEEK, etc.) at our own factory! With temperature-controlled processing environments and years of experience, we can tackle challenging processing projects and achieve high-precision machining! Our factory is supported by a 1-meter concrete foundation and over 100 piles, and we employ "edge cutting" in the foundation to minimize the impact of vibrations. 【Measurement】 In addition to 3D measuring devices, we can perform reverse engineering, image measurement, roundness measurement, and more using our X-ray CT system for inspection measurements. *For more details, please refer to the PDF materials or feel free to contact us. When inquiring, please reach out through the related link (contact form) below.

• Contract manufacturing

Processing achievements with a precision/tolerance of 0.001mm! From aluminum and stainless steel to titanium, Inconel, and other difficult-to-machine materials.

At You Corporation, we reproduce machining of difficult materials such as aluminum, stainless steel, titanium, Inconel, Kovar, and Super Invar with abundant know-how and high-precision machines!! We also handle all resin processing in our own factory. High-precision machining is achieved in a temperature-controlled processing environment. Additionally, we support the foundation with a 1m concrete base and over 100 piles, employing "cutting edges" in the foundation to minimize the impact of vibrations. ★Features ■ Machining precision: We have machining records with tolerances in the range of 0.001mm. ■ Temperature is set to "Summer: 24℃±0.5℃ / Winter: 20℃±0.5℃" to minimize the impact on machining machines and materials. ■ High-precision machining is achieved in an environment that excels in both seismic resistance and vibration isolation. ■ The factory is located 150m away from the roadway, ensuring that even minute vibrations are not picked up. *For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out via the related link (contact form) below.

• Processing Contract

Aluminum, stainless steel, titanium, ABS, PC, POM, PEEK, PP, PPS processing. Capable of handling a wide range of materials! 3D shapes with 5-axis machining too!

【Video Now Available!】 We are producing pencils using our 5-axis machining center worth approximately 50 million yen! We will introduce the entire process in this two-part series! At U Corporation, we own about 100 machining centers, including both 5-axis and 3-axis machines! We handle both resin and metal at our own factory! ■ Resins: ABS, PC, POM, PEEK, PP, PPS, etc. * We also accommodate glass-filled resins! ■ Metals: Aluminum, stainless steel, titanium, super Invar, tantalum, molybdenum, pure copper, pure iron, brass, iron, etc. * We have an environment capable of handling various difficult-to-machine materials! Glass-filled resins like PC, PBT, and PPS tend to warp during machining. Therefore, we fully utilize our high-spec machining equipment and processing environment to tackle challenging precision requirements. * For more details, please refer to the PDF document or feel free to contact us. When inquiring, please reach out through the related link below (contact form).

• Resin processing machine

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.