We will exhibit at the Powder Technology Exhibition in Osaka 2011.

ULREA is a forced thin-film microreactor, a reaction device based on a new principle that utilizes the microchannel formation technology we have independently developed.

ULREA is a reactor that uses a forced thin film (microchannel) formed between a rotating disk and a fixed disk as the reaction field. It can be applied to all chemical reactions, including crystallization and reduction reactions. Particle size can be easily controlled from single nanoparticles to microparticles. 【Features】 ○ Reaction channel width: 1–30 μm ○ Clogging (crystals, bubbles): Self-draining capability, no blockage ○ Leakage: Low pressure loss ○ Reaction time control: Freely controllable based on reaction conditions and equipment operating conditions ○ Scale-up: Easily adaptable for mass production ○ Energy cost: Low energy required for production

• Emulsifier/Disperser

This is a test machine for the precision disperser, mixer, and emulsifier, Creamix. It provides fundamental data during small-scale tests when scaling up.

CreaMix is a precision dispersing, stirring, and emulsifying machine that uses a unique technology to generate liquid-liquid shear forces. The treatment material, given kinetic energy by a high-speed rotating rotor, increases in velocity as it passes through the screen slit section, forming a pulsating jet flow within the treatment material in the tank. This generates shear forces (liquid-liquid shear forces) between the treatment materials at the velocity interface. The shear forces from this pulsating jet flow enable micro-pulverization, allowing for particle size control by adjusting the jet flow speed and streamline direction, ensuring reliable scale-up. *For more details, please download the catalog or feel free to contact us.*

• Emulsifier/Disperser

Eliminate powder bridging and rat holes! Easy to install and quiet! Introducing powder bridging prevention equipment that is also easy to maintain!

The powder bridge prevention device "Fluidizer" prevents bridging and rat holes by flowing compressed air around the silicone disc on the inner surface of the tank. When the air is off, the silicone disc adheres to the inner surface of the tank like a suction cup. When the air is on, the pressure causes the area around the disc to lift away from the inner surface of the tank, allowing air to flow along the inner surface through the gap. Additionally, during this time, the disc vibrates, ensuring a reliable flow of the powder. 【Features】 ■ The disc normally adheres to the inner surface of the tank, and when the air is on, the speed of the air prevents powder from clogging on the piping side. ■ The silicone disc is durable against hardening and cracking. ■ It can be used up to 170°C. ■ It does not damage the tank like vibrators or knockers. ■ It is easy to install and economical. *For more details, please download the catalog or contact us directly. We also offer free rentals.

• Food storage equipment and facilities

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed

Features: ● Equipped with Intel Atom x7835RE/x7433RE ● LPDDR5x 8GB/16GB onboard ● eMMC 32GB/64GB onboard ● LVDS x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen 2 x 2 ● PCIe x1 x 4 ● COMe Type 10 standard, 84mm x 55mm size ● Operating temperature -40 to 85℃ ● Optional items ECB-920A-0001: Development carrier board NANOCOM-ADN-FAN01: CPU fan NANOCOM-ADN-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)