The catalog for the sounding type level meter "KSL Series" has been updated.

Measuring without being affected by dust generated in powder silos! With a robust housing, it excels in durability under harsh environmental conditions, making it ideal for storage management!

The "KSL Series" is a general-purpose level meter that boasts numerous achievements as a level measurement device for powders, grains, and bulk materials stored in tanks, silos, etc. We offer a rich lineup including the standard model "KSL-T2," the "KSL-T8" equipped with a CPU, and the "KSL-MT." With a robust housing, it demonstrates excellent durability under harsh environmental conditions and accommodates various processes. 【Features】 - Stable indication that is less affected by the measured material and surrounding conditions - Direct pulse output and analog output possible from the detection unit (KSL-T8, KSL-MT) - Fault alarm contacts are included as standard (KSL-T8, KSL-MT) - Built-in CPU self-diagnosis mode and various check modes are available - An automatic measurement timer is built into the detection unit, eliminating the need for external timer space *For more details, please refer to the PDF document or feel free to contact us.

• Electrical Instruments/Electrometers
• Level gauges and level switches
• Other measurement, recording and measuring instruments

Sounding-type microprocessor-controlled controller [KSL-DS4 model]

The KSL-DS4 type is a microprocessor-controlled controller that can connect up to four of our sounding type level meters. It converts the measurement distance of the instrument into the storage volume in the tank, and can be set to display either the empty volume or the remaining volume. The tank display can be selected with a single touch, and it can be set up with a flexible detection method according to the application. <Compatible Models> KSL-T8 (AU) type, KSL-T2 type, KSL-W3T type, KSL-W2B type

• Level gauges and level switches

Contact-type continuous level meter for powder (level meter) [KSL series]!

The measurement method is a simple mechanical detection method, so it is not affected by dust and other factors that can cause malfunctions in non-contact continuous level gauges. Additionally, initial adjustments are easy; once the instrument is installed and powered on, measurement can begin immediately. With regular inspections and replacement of consumable parts, it can be used for many years. Our technicians can also be dispatched to inspect the instruments. *For more details, please refer to the PDF materials or feel free to contact us.

• Level gauges and level switches

Reliable measurements thanks to mechanical design! An explanation of the sounding type level meter in manga format.

This booklet provides an easy-to-understand explanation of sounding-type level meters through manga. We respond to real voices from manufacturing sites, such as, "In powder silos, non-contact level meters malfunction due to dust; are there any other models that can measure accurately?" Please feel free to download and take a look. [Contents] ■ Sounding-type level meters ・ Mechanical *For more details, please refer to the PDF document or feel free to contact us.

• Level gauges and level switches
• Other measurement, recording and measuring instruments
• Liquid level control/level switch

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.