Notice of Participation in Nagoya Smart Factory Expo (Factory Innovation Week 2023)

Correcting floor tilts caused by earthquakes and ground subsidence without stopping operations and in a short period! No need to move machines or equipment! Also suppressing any concerning vibrations from the machines!

■ The machine cannot be leveled. ■ The machine is tilted and vibrating. ■ Malfunctions are occurring in the machine, leading to an increase in defective products. ■ Gaps have formed in the floor, walls, and ceiling. ■ Cracks have appeared in the floor. The "Upcon Method" solves problems caused by floor tilting and sagging due to earthquakes or ground subsidence, as well as voids and gaps that have formed beneath the floor, using polyurethane resin for quick repairs. 【What is the Upcon Method?】 Small holes with a diameter of 16mm are drilled into the existing concrete floor where subsidence has occurred. While continuously monitoring the level in millimeter increments, polyurethane resin is injected. The resin injected beneath the floor expands under pressure in a short time, compacting and strengthening the ground, improving bearing capacity, and pushing the concrete back to a level position. The final strength of the resin is achieved in about 60 minutes. Even if voids have formed beneath the floor, the same method is used to fill those voids. Since the existing concrete floor is repaired without demolition, the construction period is significantly reduced compared to conventional methods. The polyurethane can lift the floor with a foaming pressure of up to 10 tons per square meter, eliminating the need to move heavy equipment or materials. The deformation of the floor is corrected without stopping the production line.

• Contract measurement
• Other contract services
• others

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Ejectors tend to be avoided due to their enormous consumption of compressed air. However, they also have many advantages, such as noise reduction, no heat generation, and no vibrations. When used properly, they can also achieve energy savings. ■ Space-saving, noise reduction, and heat prevention! Goodbye, electric pumps Large ejectors are ideal for replacing electric pumps. Their impact is significant and greatly contributes to improving the environment in manufacturing sites. Moreover, maintenance can be done without tools. For more details, visit: https://www.ipros.jp/catalog/detail/718575

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x1, eDP x1, DP x1, HDMI x1 ● LAN x3, SATA 6Gb/s x1, 8-bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● M.2 2280 M-Key x1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.

Features: ● Equipped with Intel Core i3-N305 / Processor N97 ● DDR5 4800MHz SO-DIMM x1 slot (up to 16GB) (sold separately) ● LVDS Dual Channel 18/24 bit x1, VGA x1, HDMI x1 ● Intel 2.5GbE x2, SATA 6Gb/s x1, 8bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● Full size mPCIe/mSATA ● M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heatsink included * Memory, storage, and OS sold separately