What is the best material for a draft chamber?

Custom production available! Can be easily installed on experimental tables and other surfaces! Ideal for laboratories with limited installation space.

The tabletop draft chamber is a type that can be easily installed on experiment tables and is suitable for laboratories with limited installation space. We offer three types of products: "FDV-DT" made of vinyl chloride, "NXB-DT" made of steel, and "FHS-DT" made of stainless steel. You can choose from four sizes for the main body opening: 900mm, 1200mm, 1500mm, and 1800mm. 【Features】 ■ Can be easily installed on experiment tables and similar surfaces ■ Ideal for laboratories with limited installation space *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! Can be easily installed on experiment tables and similar surfaces! Ideal for laboratories with limited installation space.

The tabletop draft chamber is a type that can be easily installed on laboratory tables and is suitable for laboratories with limited installation space. We offer three types of products: "FDV-DT" made of PVC, "NXB-DT" made of steel, and "FHS-DT" made of stainless steel. You can choose from four sizes for the main opening dimensions: 900mm, 1200mm, 1500mm, and 1800mm. 【Features】 ■ Can be easily installed on laboratory tables ■ Ideal for laboratories with limited installation space *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! Can be easily installed on experiment tables and similar surfaces! Ideal for laboratories with limited installation space.

The tabletop draft chamber is a type that can be easily installed on experiment tables and is suitable for laboratories with limited installation space. We offer three types of products: "FDV-DT" made of PVC, "NXB-DT" made of steel, and "FHS-DT" made of stainless steel. You can choose from four patterns for the main body opening dimensions: 900mm, 1200mm, 1500mm, and 1800mm. 【Features】 ■ Can be easily installed on experiment tables and similar surfaces ■ Ideal for laboratories with limited installation space *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! It is possible to use large floor-standing experimental equipment! Three types of exterior materials for the main body are available.

The walk-in draft chamber is a type that allows the use of large floor-standing experimental equipment. You can choose from three types: "WNV" made of PVC, "WNB" made of steel, and "WNS" made of stainless steel. The working sash height is 400mm, with the height of the PVC version being 2100mm and the height of the steel/stainless steel versions being 2300mm. 【Features】 ■ Available in three types: PVC, steel, and stainless steel ■ Capable of accommodating large floor-standing experimental equipment *For more details, please refer to the PDF materials or feel free to contact us.

• Draft chamber

Custom production available! It is possible to use large floor-standing experimental equipment! Three types of exterior materials for the main body are available.

The walk-in draft chamber is a type that allows the use of large floor-standing experimental equipment. You can choose from three types: PVC "WNV," steel "WNB," and stainless steel "WNS." The working sash height is 400mm, with the PVC version having a height of 2100mm, and the steel/stainless steel versions having a height of 2300mm. 【Features】 ■ Available in three types: PVC, steel, and stainless steel ■ Capable of accommodating large floor-standing experimental equipment *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! It is possible to use large floor-standing experimental equipment! Three types of exterior materials for the main body are available.

The walk-in draft chamber is a type that allows the use of large floor-standing experimental equipment. You can choose from three types: "WNV" made of PVC, "WNB" made of steel, and "WNS" made of stainless steel. The working sash height is 400mm, with the height of the PVC model being 2100mm and the height of the steel/stainless steel models being 2300mm. 【Features】 ■ Available in three types: PVC, steel, and stainless steel ■ Capable of accommodating large floor-standing experimental equipment *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

The inner wall material is made of non-asbestos fireproof material and heat-resistant vinyl chloride!

The "NXB-AC" is a steel acid decomposition draft chamber. It is suitable for research laboratories conducting acid decomposition work. The inner walls and working surfaces are selected considering corrosion resistance and heat resistance. Additionally, you can choose the shape and number of gas valves and outlets. Please feel free to consult us when you need assistance. 【Lineup】 ■NXB-09-AC: W900×D850×H2300mm ■NXB-12-AC: W1200×D850×H2300mm ■NXB-15-AC: W1500×D850×H2300mm ■NXB-18-AC: W1800×D850×H2300mm *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! (Material changes are also possible!) The exterior is made of cold-rolled steel sheet (SPCC) with powder-coated paint! It is made of steel and can accommodate large equipment integration.

The "NXB-L" is a low working surface draft chamber made of steel. It features a low working surface, a large opening height of the front glass, and a high internal ceiling, allowing for the incorporation of large equipment. The exterior is made of cold-rolled steel plate (SPCC) with powder coating, and the interior walls are available in N (non-asbestos fireproof material), S (stainless steel), and V (vinyl chloride). Please feel free to contact us for inquiries. 【Features】 ■ Low working surface ■ Large opening height of the front glass and high internal ceiling ■ Options - Fan, variable air volume inverter, ultra-high color rendering (Ra98) LED fluorescent lights, and more * For more details, please refer to the PDF materials or feel free to contact us.

• Draft chamber

Custom production available! (Material changes are also possible!) Introducing products with indicator lights for draft operation! Made of steel with powder coating.

The "NXB-B" is a steel double-sided draft chamber. It is a centrally installed model with a wide depth that allows work to be performed simultaneously from both sides. The exterior is made of cold-rolled steel plate (SPCC) with powder-coated finish. Options available include a blower, an inverter for variable air volume, and ultra-high color rendering (Ra98) LED fluorescent lights for color inspection. Please feel free to consult with us when placing an order. 【Lineup】 ■NXB-09-B: W900×D1500×H2300mm ■NXB-12-B: W1200×D1500×H2300mm ■NXB-15-B: W1500×D1500×H2300mm ■NXB-18-B: W1800×D1500×H2300mm *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! Resistant to corrosive gases and does not rust! Widely used in chemical laboratories, clinical testing laboratories, schools, etc.

We would like to introduce our standard PVC draft chamber, the 'FDV/FDHV'. The front sliding doors can stop at any height due to the balance weight system. Additionally, they are resistant to corrosive gases and do not rust. The 'FDV' is made of PVC, while the 'FDHV' is made of heat-resistant PVC. Please feel free to contact us if you need any assistance. 【Features】 ■ Front sliding doors with balance weight system ■ Made of PVC *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Custom production available! The work surface is stainless steel! Uses safety reinforced glass to prevent accidental incidents.

The "FHS" is a standard stainless steel draft chamber widely used in chemical laboratories, clinical testing rooms, schools, and more. The front sliding doors can be stopped at any height using a balance weight system. Additionally, it is made with safety tempered glass to prevent accidental incidents. Please feel free to contact us when you need assistance. 【Features】 ■ The front sliding doors can be stopped at any height using a balance weight system. ■ Made with safety tempered glass. ■ Stainless steel (SUS304). *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

The balance door uses safety reinforced glass! Ideal for research laboratories with a high risk of fire and explosion. Custom production is possible!

The "NXS" is a draft chamber with a steel exterior and an interior wall made of SUS304 stainless steel. It is suitable for research laboratories where there is a high risk of fire and explosion due to the use of flammable and ignitable gases and liquids. All electrical equipment used is explosion-proof and pressure-resistant, designed to prevent ignition from electrical sparks, and the main body is completely non-combustible. Please feel free to contact us when you need assistance. 【Features】 ■ All electrical equipment is explosion-proof and pressure-resistant ■ The main body is completely non-combustible ■ Work surface materials are available in stainless steel and ceramic style *For more details, please refer to the PDF materials or feel free to contact us.

• Draft chamber

The sliding door at the front can slide up and down with a balance weight system! It can stop at any desired height and is available for custom production!

The "NXB" is a standard steel draft chamber widely used in chemical laboratories, clinical testing rooms, schools, and more. The front sliding doors can be stopped at any height using a balance weight system, and they are made of safety reinforced glass to prevent accidental incidents. Please feel free to contact us if you have any inquiries. 【Lineup】 ■NXB-09: W900×D850×H2300mm ■NXB-12: W1200×D850×H2300mm ■NXB-15: W1500×D850×H2300mm ■NXB-18: W1800×D850×H2300mm *For more details, please refer to the PDF materials or feel free to contact us.

• Draft chamber

Steel construction with cold-pressed steel sheet powder coating! Safety tempered glass balance door.

We would like to introduce our draft chamber (inner wall made of PVC) 'NXV/NXHV'. The outer material of the main body is made of steel (powder-coated). The balance door uses safety reinforced glass with a balance weight system. Additionally, the inner wall of the 'NXHV' is made of heat-resistant PVC. Please feel free to consult us when you need assistance. 【Options (partial)】 ■ Blower ■ Inverter for variable air volume ■ Ultra high color rendering (Ra98) LED fluorescent light for color inspection *For more details, please refer to the PDF document or feel free to contact us.

• Draft chamber

Features: ●Core 3 N355/N150 ●DDR5 SODIMM x 1 (up to 16GB) ●HDMI 1.4, VGA, LVDS ●2.5GbE x 3, SATA 6Gb/s, GPIO 8-bit ●USB 3.2 Gen 2 x 2, RS-232/422/485 x 2, RS-232 x 2 ●Mini PCIe x 1, M.2 2230 E-Key x 1, M.2 3052 B-Key x 1 ●DC input 9V～36V

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x 1, eDP x 1, DP x 1, HDMI x 1 ● LAN x 3, SATA 6Gb/s x 1, 8-bit GPIO ● USB 3.2 Gen2 x 2, USB 2.0 x 4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x 1, M.2 2230 E-Key x 1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.

Our company will be exhibiting at the "28th IoT & Edge Computing Expo [Spring]" within Japan IT Week, which will be held at Tokyo Big Sight from April 8 (Wednesday) to April 10 (Friday), 2026! We will showcase an AI compact edge PC equipped with NVIDIA's Jetson Thor, boards and PCs featuring Intel's Panther Lake and Bartlett Lake, a vending machine-type demo using ARM boards, as well as touch panel PCs, tablet PCs, and other peripheral devices. ■ Dates: April 8 (Wednesday) - April 10 (Friday), 2026 ■ Hours: 10:00 AM - 6:00 PM (until 5:00 PM on the final day) ■ Venue: Tokyo Big Sight, West Hall 3 ■ Booth Location: W22-22 You can register for your visit at the URL below. We sincerely look forward to your attendance. https://www.japan-it.jp/spring/ja-jp/register.html?code=1606569853287533-WSW

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)