We have started handling SMARTTECH's 3D scanners.

The optimal solution for "comparison inspection of measurement data and CAD models using a 3D scanner" and "reverse engineering"!

SMARTTEC's SMARTTECH3D Robotized is an integrated ecosystem for automating quality control and reverse engineering processes. It incorporates the advantages of a high-resolution scanning head equipped with a robotic arm and a 20MP detector to fully implement the designed measurement processes. It not only enables the automation of 3D model creation but also allows for the independent generation of inspection reports in PDF format and the direct display of deviation maps from CAD models on the measured objects.

• Scanner

The optimal solution for "comparison inspection of measurement data and CAD models using a 3D scanner" and "reverse engineering"!

The MICRON3D Green Stereo is the most precise industrial 3D scanner from SMARTTECH. With quantitative verification and high parameters, it serves as a complete tool for quality control and reverse engineering. It uses green LED light with a foolproof design at a wavelength of 500nm for measurements. By employing a narrowband filter, it eliminates the influence of external lighting. The high-end monochrome detector responsible for three-dimensional measurement, noise reduction, and dual-direction projection of interference fringes digitally depicts the sharp edges of the measured objects with greater accuracy.

• Scanner

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.