Catalog Release: Donaldson Process Filter Products

PG-EG single housing developed for filtering compressed air and industrial gases.

The PG-EG single housing is a product developed for the filtration of compressed air and industrial gases. By combining it with filter cartridges of various collection rates, it accommodates a wide range of applications. The PG-EG housing is available in six sizes and supports flow rates of 7.5 to 360 m³/h at a pressure of 0.1 MPa. The housing features an electropolished surface treatment with Ra < 0.8 μm.

• Pneumatic Equipment

Aseptic air box used in food and beverage manufacturing environments.

The 'P-SLF Box' developed for food and beverage manufacturing processes that require air free of bacteria and particulate matter. With eight box sizes ranging from 0.5 to 15㎥/min (18 to 529 cfm), it can produce sterile air in a cost-effective manner. The P-SLF Box is available in both portable and fixed versions and can be sterilized with saturated steam.

• Food Processing Equipment

Sterile grade pleated high-performance PTFE membrane filter (P)-PF-PT

- Excellent chemical resistance to various stimuli substances - Uses a uniquely developed hydrophobic PTFE membrane - Sterilization grade 0.2 μm (HIMA/ASTM) - High flow rate - Biologically inert - Approved for food contact in compliance with CFR (Code of Federal Regulations) Title 21 and European Regulation 1935/2004

• Food Cleaning Equipment

Various connectable multiple housings 'PF-EG' developed for liquid filtration.

- Product range of stainless steel housings for liquid filtration with wide applications - Surface mechanically polished - Internal finish Ra < 0.8 μm - Connection for Code 7 filter elements - Various housing connections available - Made of fully stainless steel 316L / 1.4404 - Standard specification with drain port and vent port - 1 ½” clamp connection with blind clamp on drain port and vent port - Housing certified to ATEX Class 2 - ATEX Classification: Ex II 2GD IIC

• Food Cleaning Equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

We will be exhibiting jointly with Ando Corporation at the "22nd Pipe and Equipment Comprehensive Exhibition 2025 OSAKA," which will be held for three days from September 11 (Thursday) to September 13 (Saturday), 2025, at Intex Osaka, Hall 6A. Please be sure to stop by when you visit. 【Exhibition Schedule】 ● Environmentally friendly heat exchanger "Heat Recovery Heat Exchanger" ● Cut model of "Stainless Steel High Efficiency Heat Exchanger" ● Skeleton model of heating and cooling heat exchanger "SK Water Coil" ● Cooling heat exchanger "SK Water Coil Cartridge Type" ● Radiant heating pipe for space heating "SK Aerofin Tube" ◆ Event Dates: September 11 (Thursday) to September 13 (Saturday), 2025 10:00 AM to 5:00 PM (until 3:00 PM on the last day) ◆ Venue: Intex Osaka, Hall 6A Address: 1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture, 559-0034 Access: https://www.intex-osaka.com/jp/access/ ◆ Booth Number: 112 ◆ Admission Method: Pre-registration required (free) *Please check the official website for details.