Notice of Advertisement Publication in the Daily Industrial News, March 28, 2024 Issue

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎Simple structure, no worries about breakdowns ◎Equipped with new features for greater convenience and easy operation ◎Convenient options 《Benefits》 ●Can be used simply by placing it on a commercially available pail ●Continuous operation possible ●Can be used as both a wet and dry vacuum pump ●Less prone to breakage compared to electric vacuum cleaners ●Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ●For collection only (general oil, oils, metal shavings, etc.) ●Compatible with JIS standard 20L open pails (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ●Automatic stop when liquid is full ●Can be used with air compressors of 5 horsepower (3.75kw) or more ●Includes air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning in warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

A vacuum cleaner for collecting oil and metal shavings in a bucket. It is convenient for on-site cleaning as it can handle both dry and wet materials.

"APPQO Series" APPQO600S (For oil / Wet and dry use) APPQO600 (For oil / Wet and dry use) APPQO600-SET (For oil / Wet and dry use) APPQO600-TC200 (100/50) (For oil / Wet and dry use / Drum can specification *Drum can itself is not included) APPQO600-DTC200 (100/50) (For oil / Wet and dry use / Drum can specification) *Drum can specification (Top plate, Carry) ◎ Simple structure with no failures ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options "Benefits" ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a suction pump and a vacuum cleaner with wet and dry capabilities ● Less prone to breaking compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition "Features" ● Dedicated for collection (general oil, oil, chips, etc.) ● JIS standard 20L open pail can (for top outer diameter 300mm±1, recommended plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM

• Industrial Vacuum Cleaners

Oil use / wet and dry use! Vacuum cleaner with silencer! A pail vacuum cleaner that can collect oil and metal shavings! Convenient for site cleaning due to its wet and dry capabilities.

◎ Simple structure, no worries about breakdowns ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Dedicated for collection (general oil, oil, metal shavings, etc.) ● Compatible with JIS standard 20L open pails (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive repair shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing plants Recovery of cutting fluids in metal processing Cleaning in shipyards and bilge areas Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Oil and wet/dry vacuum cleaner for collecting oil and metal shavings! Convenient for site cleaning due to its wet/dry capability.

◎ Simple structure, no risk of failure ◎ Equipped with new features for greater convenience and easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available drum ● Continuous operation possible ● Usable as both a wet and dry vacuum pump ● Less prone to breakage compared to electric vacuum cleaners ● Air-driven, safe for use in explosion-prone areas, no risk of ignition 《Features》 ● Designed for collection only (general oil, oils, metal shavings, etc.) ● Compatible with JIS standard 20L open drums (recommended outer diameter of 300mm±1, plate thickness of 0.4mm or more) ● Usable with air compressors of 5 horsepower (3.75kw) or more ● Comes with air coupler 30PM 《Applications》 Cleaning around equipment and vehicles in automotive maintenance shops Cleaning in pulp mills, paper mills, and printing factories Collection of cutting scraps in rubber manufacturing factories Recovery of cutting fluids and shavings in metal processing Cleaning in shipyards and bilge areas of ships Cleaning of warehouses and aisles Recovery of sludge and wastewater from septic tanks and pits Collection of welding spatter Recovery of grease traps and floating oil

• Other pumps

Cutting fluids for machine tools can be reused! Tank cleaning time is significantly reduced!

**APDQO Series** APDQO-FF100 (Non-woven Fabric Filter) APDQO-FS100 (Stainless Steel Filter) APDQO-FB100 (Bag Filter) ◎ Does not use electricity ◎ Automatically stops when full ◎ Equipped with a safety valve as standard **Benefits** ● Enables reuse of cutting fluid ● Improves tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes **Features** ● Designed specifically for JIS standard 200L open drums ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of cleaning tanks of machine tools as well as filtering and separating 'liquids' and 'solids'. Therefore, in addition to filtering chips and sludge from machine tools, it can be used for the following purposes: ● Cleaning of machine tool tanks (removal of chips and sludge and reuse of cutting fluid) ● Separation and sorting of food waste in wastewater at food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• Filtration Equipment

Reusing cutting fluids for machine tools and tank cleaning.

**APDQO Series** APDQO-FS (Stainless Steel Filter) APDQO-FF (Non-woven Fabric Filter) APDQO-FB (Bag Filter) ◎ Does not use electricity ◎ Automatically stops when full ◎ Equipped with a safety valve as standard **Benefits** ● Enables reuse of cutting fluid ● Improves tool life ● Safe with no electric leakage due to air drive ● Cleaning time as short as 5 minutes **Features** ● Designed specifically for JIS standard 200L open drums ● Capable of separating cutting fluid and chips ● Safety valve and float included as standard **Applications** The air-operated tank cleaning filtration cleaner APDQO-F series is capable of cleaning tanks of machine tools and filtering and separating both "liquids" and "solids." Therefore, in addition to filtering chips and sludge from machine tools, it can also be used for the following purposes: ● Cleaning machine tool tanks (removing chips and sludge and reusing cutting fluid) ● Separating and sorting food waste in wastewater at food processing plants (restaurants) ● Separating water and sludge from mountains and rivers ● Separating and sorting waste and sewage

• Filtration Equipment

[Sanitary Product / Heller Joint Specification] Designed for the large-volume transfer of high-viscosity liquids; it is disassemblable for cleaning! This is a separate type air vacuum pump.

◎ Explosion-proof design that does not use electricity ◎ Double safety structure for peace of mind ◎ Compatible with high-viscosity liquids ◎ Can be stored in a sealed manner ◎ Low failure rate 《Benefits》 ● Safely suction volatile and flammable liquids ● Quiet operation with a 1 horsepower compressor ● Low air consumption and energy-saving ● Acceptable for small amounts of foreign matter contamination ● Continuous operation possible ● Automatic stop when full ● Easy to clean due to a structure that allows for disassembly ● Available with sanitary-grade ferrule fittings ● The sanitary type has a proven track record for food use (APDQS-1s, 1.5s) * Not applicable under the Food Sanitation Act 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Closed drum negative pressure type, suction only, no discharge ● Separate pressure reduction section (G3/4) and suction section (G2) 《Mechanism of the Air Vacuum Pump》 This pump collects various liquids such as kerosene, light oil, oil, and chemicals from closed drums. It can efficiently and safely collect without using electricity through an ejector mechanism. The collected drums can be handed directly to waste disposal companies. * Please contact the disposal company for disposal methods.

• Other pumps

It is possible to circulate and filter cutting fluid without stopping the machine tools.

**J-F Series** J-FF (Non-woven Fabric Filter) J-FS (Stainless Steel Filter) J-FB (Bag Filter) ◎ Does not use electricity ◎ Can be cleaned without stopping the machine ◎ Mesh can be changed as an option **Benefits** ● Cleaning can be performed without stopping the machine ● Reuse of cutting fluid is possible ● Improved tool life ● Safe due to air drive with no electric leakage ● Cleaning time as short as 5 minutes ● Compact design allows work in narrow spaces **Features** ● Diaphragm circulation type ● Continuous operation possible ● Filters available to match cutting fluids *Please be sure to use an air filter lubricator.* **Applications** ● Cleaning of machine tool tanks (removal of chips and sludge, and reuse of cutting fluid) ● Separation and sorting of food waste in food processing plants (restaurants) ● Separation of water and sludge from mountains and rivers ● Separation and sorting of waste and sewage

• Filtration Equipment

We exhibited a booth at the "4th Annual Meeting of the Japanese Society for Antibody Research" held at Omiya Sonic City from December 1 (Monday) to December 3 (Wednesday). Thank you very much to everyone who visited our booth during the event. Thanks to your support, we were able to successfully conclude the meeting. If you have any questions regarding the products you viewed, please feel free to reach out to us. We will respond to inquiries received during the event in due course. We appreciate your continued support of Higuchi Shokai. ▼Exhibited Products - Various assembly parts (bags, bottles, sampling, etc.) - Depth filters (post-culture filtration)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.