Introducing the Plasteco feeder that can supply the main material and auxiliary material in the appropriate amounts for the full-weight measurement supply system!!

An automatic quantitative supply system for main materials (raw materials) and auxiliary materials (additives, etc.) that can be linked to an extrusion molding machine! Precise control of the raw material addition rate is possible!

This is a feeder that quantitatively supplies the main material (raw material) and auxiliary materials (additives, etc.) to the extrusion molding machine. It precisely controls the main feeder for the main material, the sub-feeder for the auxiliary material, and the gas (foaming agent), linking their respective addition rates. By combining it with Plasteco, a manufacturer specializing in inert gas foaming, extrusion molding machines, dehumidifying dryers with stirring, gas supply units, etc., it is possible to construct a "supercritical inert gas extrusion foaming system" that is more suitable for foaming.

• Powder Supply Device

Please consult with us. We overturn the conventional wisdom of plastic! Environmentally friendly, high value-added foaming technology.

The "Supercritical Inert Gas Foaming Technology" is a high-value-added micro-foaming technology that considers both people and the environment. It does not have the explosiveness or flammability of hydrocarbon-based physical foaming agents, so there is no need to make the equipment explosion-proof. It is also free from the toxicity of chemical foaming agents and has no residual effects, making it excellent for recycling. Our company provides comprehensive support from raw materials to the entire molding equipment and the development of the molding process. Additionally, our foaming molding machines come standard with extrusion molding and RIM molding. If you are considering foaming molding, please feel free to contact us. 【Features】 ■ The foaming agent is non-explosive and non-flammable, eliminating the need for explosion-proof equipment. ■ It has a low global warming potential, taking the global environment into consideration. ■ It is non-toxic and has no residual effects, making it excellent for recycling. ■ It is capable of forming fine bubbles of several micrometers. ■ It can also be applied to foaming of crystalline resins, which were difficult to foam at high ratios with conventional methods. *For more details, please refer to the PDF materials or feel free to contact us.

• Gas recovery/treatment equipment

For precise liquid delivery of various fluids, from low flow to high flow and from watery to high viscosity, trust the high-pressure multipurpose pump from Plasteco! [Easy maintenance]

Choose from types based on your application!! ● Pump only (for device integration) ● Integrated control unit This is a plunger pump that supports high-pressure liquid delivery up to 40MPa as standard. It has a proven track record in our flagship product, the "Supercritical Inert Gas Quantitative Supply System." We offer a wide range of models with maximum flow rates from 10mL/min to 1000mL/min, allowing you to select according to your usage purpose, from small flow rates suitable for research and experiments to large flow rates for mass production. In addition to standard specifications, we also have a rich selection of options to accommodate special specifications such as high-viscosity fluids, high-temperature fluids, slurries, and supercritical fluids. Please consult us regarding your desired flow rate, operating pressure, and fluid. With high durability and a simple structure, self-maintenance by customers is also easy.

• Positive Displacement Pump

Renewed with a new model! This is a gas supply device capable of precisely and stably supplying inert gases necessary for foam molding, such as carbon dioxide (CO2) and nitrogen (N2).

【Renewal & New Model Launch!】 - Smaller and lighter than the previous model - Equipped with a 12-inch large screen touch panel - Precise control of gas supply volume is possible through data linkage with various molding machines Foaming with CO₂ or N₂ experiences significant changes in bubble diameter and foaming conditions due to minor fluctuations in supply volume. Additionally, traditional pump methods using pressure control have seen supply volume fluctuate due to pressure changes at the gas injection point of the molding machine. Plasteco's supercritical inert gas quantitative supply device maintains a constant supply mass and automatically adjusts the supply pressure to follow the pressure at the supply point, enabling precise control of the supply volume at all times and achieving uniform and fine foaming. Furthermore, by precisely controlling the gas addition amount through data linkage (optional) with extrusion and injection molding machines, stabilization of foaming ratios and reduction in the weight of molded products become possible. It can accommodate a wide range of applications, from small flow rates for small molding machines to large flow rates for large molding machines, as well as RIM molding and other uses. It also supports flow control, high-pressure compatibility, and other options, making it suitable for various applications.

• Extrusion Machine

All-in-one dehumidifying, drying, and transporting machine with stirring function suitable for drying resins that easily fuse and adhere, such as bioplastics.

Suitable for bio-plastics such as PLA and PHA! ● Compatible with resins that are prone to fusion and adhesion due to stirring function ● Low dew point honeycomb adsorption tower type ● All-in-one for dehumidification, drying, and transportation The DryTeco-S HCF series is a dryer that compactly integrates three functions: dehumidification, drying, and transportation. It is equipped with a stirring device to prevent pellet adhesion, making it suitable for various plastic materials, especially bio-plastics (PLA, PHA, PBS, etc.) and hygroscopic engineering plastics (PA, PC, PBT, PET, etc.). It consists of a Japanese-made honeycomb rotor adsorption tower and an all-stainless steel insulated drying hopper. Safety devices: power reverse phase detection, over-temperature prevention, inspection port safety switch.

• Drying Equipment

The SLA5800 series thermal mass flow controllers/meters are widely adopted as standard equipment due to their excellent accuracy, stability, and reliability. This series features a wide range of flow measurement capabilities and is suitable for various temperature and pressure conditions, making it ideal for a broad range of applications including research in the chemical and petrochemical fields, analytical instruments, fuel cells, and life sciences. Contents ■Features and Benefits ■Standard Specifications ■Product Dimensions ■Model Codes ■Approvals, Certifications, and Services ■Service and Support, etc.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

**Improvement of Spoofing Prevention Accuracy and Performance** With FaceMe SDK 7.8, we enhance measures against increasingly sophisticated spoofing attacks by improving authentication accuracy and processing speed, thereby increasing the safety and reliability of facial recognition. - IR + RGB Spoofing Prevention: Detection accuracy improved by up to 35%, processing speed improved by up to 15% - 3D Spoofing Prevention: Detection accuracy improved by up to 56.8% for Intel RealSense D415 **Reducing Development Burden with the New Integrated API "FaceMe Authenticator"** We have integrated multiple processes that previously required individual implementation into a single API. Integrated Functions: - Face Detection + Feature Point Extraction + Spoofing Prevention + Authentication Processing Features: - Supports Windows / Ubuntu x64 / Android - Allows use of 2D cameras, 3D depth cameras, and IR + RGB cameras through a single interface - Significantly reduces development load while maintaining high-accuracy authentication

With the expansion of our production system, we have introduced and started operating the Okuma "MULTUS B330." As a result, we have established a system that can quickly respond to more advanced and complex processing needs, ranging from large components to customized precision measuring instruments. We will leverage our strength of being able to perform integrated production from measurement to assembly, strongly supporting high-precision manufacturing. Please feel free to contact us for processing inquiries or estimate requests.

In optimizing the heat treatment process, it is impossible to separate the flow of gas from the changes in the quality of the workpiece. The CAE software "DEFORM" allows for seamless coupling of fluid analysis (CFD) and gas quenching analysis within the same software. [Key Points of This Case] - Visualization of Gas Behavior: Precisely understanding the velocity distribution and flow bias within the cooling tank. - Prediction of Quenching Quality: Analyzing the temperature and microstructural changes of each part of the helical gear over time according to the flow. - Identification of Cooling Irregularities: Quantifying the heat transfer rates for specific areas such as the tooth tip, tooth root, and inner diameter. DEFORM's unique strength in simulating "from fluid to quenching" in a continuous manner supports next-generation quality design. For more details, please refer to the related links.