【ご好評につき4/26から新キャンペーンがスタートいたします！】期間限定キャンペーン第三弾の対象製品はインバータと充電器で過去最大！特別価格からまとめ買いでさらにお得にご購入いただける「オンラインストア限定・キャンペーンセール – 第三弾 - 」のご案内

Compact battery charger suitable for various charging applications.

The "GC Series" is a charger that employs a "two-stage charging" method for high efficiency and long battery life. The two-stage charging consists of an initial charge and a float charge. It is adopted as a built-in unit in chargers and is incorporated into portable power units and UPS systems. 【Features】 ■ Two-stage charging method ■ Wide input voltage: AC90–264V ■ Wide temperature range: -30℃ to +60℃ ■ W testing conducted in Taiwan and Japan ■ Primary and secondary side insulation design ■ Various protection features included *For more details, please refer to the PDF document or feel free to contact us.

• Secondary Cells/Batteries
• Charger

The charger applicable to lead-acid batteries and lithium-ion batteries can be programmed according to the battery used. Operating temperature range: -30°C to +70°C.

The "ENC Series" battery charger is a desktop type battery charger that adopts a three-stage charging method. It is suitable for lead-acid batteries (non-sealed, sealed, gel, AGM) and lithium-ion batteries (lithium iron phosphate, ternary lithium-ion, etc.), and the program settings can be adjusted according to the type of battery used. Additionally, it has built-in protection circuit functions, ensuring safe and secure usage. 【Features】 - Suitable for charging lead-acid and lithium-ion batteries - Adopts a three-stage charging method - Can be used in various countries with a wide input voltage range - Programmable charging method (optional item: SBP-001) - Remote ON/OFF control and built-in temperature sensor - Charging voltage can be set according to the type of battery - Over-voltage protection, over-temperature protection, short-circuit protection, overload protection, battery reverse connection protection - Maximum efficiency: 90.5% *For more details, please refer to the PDF document or feel free to contact us.

• Charger

Inrush load response allows instantaneous power to be twice the rated output capacity! With a global design, both output voltage and frequency can be switched.

The "TS Series" is a DC-AC inverter that can be used with various loads, providing a pure sine wave output. It supports inrush loads with an instantaneous power capacity of twice the rated output, and features a global design that allows for switching of both output voltage and frequency. Additionally, it has a thermally controlled cooling fan to reduce unnecessary power consumption. The save mode function helps to minimize self-consumption power. 【Features】 ■ Pure sine wave output ■ Supports inrush loads with instantaneous power capacity of twice the rated output ■ Global design with switchable output voltage and frequency ■ Complies with safety standards ■ Protection circuits: input high voltage protection, input low voltage protection, input low voltage alarm ■ Rapid after-sales service, investigation, and technical support in the country *For more details, please refer to the PDF document or feel free to contact us.

• Charger

【 NEW 】High-performance battery charger integrated with a power supply.

The NPP series is a 2-in-1 designed device that allows the use of both battery charger mode and power supply mode in a single unit. It can be used not only as a battery charger but also as a constant voltage output power supply to drive general loads. The system is not complicated and is a product that can be adopted for many applications. 【Features】 - 2-in-1 design: selectable battery charger mode / power supply mode - Maximum efficiency of 94% - Wide input voltage range AC90V to AC264V - Noise reduction measures with thermal control DC fan - Selectable charging methods (2-stage charging, 3-stage charging) - Built-in CANbus protocol (for control, setting, and monitoring) - Adjustable charging voltage and current via VR - Operating status signal, battery monitoring signal, remote control, and temperature sensor circuit included - Wide operating temperature range: -30℃ to +70℃ - Various protection circuits included - Certifications: UL / DEKRA / CB / EAC / AS/NZS / CE / UKCA *Currently preparing to obtain PSE certification. Models 1200 and 1700 are not subject to PSE certification. For detailed product information, please visit our website.

• Other power sources

We would like to introduce 'Slim 4' handled by FCR & Bio Co., Ltd. This product is a jacket tube with a rack lid lock and anti-rotation function (compatible capacity 4.1ml). It is autoclavable and suitable for DMSO and vapor phase of liquid nitrogen. Additionally, it features a screw cap that does not use O-rings, packing, or gaskets. 【Features】 ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Suitable for vapor phase of liquid nitrogen *For more details, please download the PDF or feel free to contact us.

● To determine the sealing and waterproofing of sealed products based on pressure changes, it is not necessary to conduct tests that involve spraying water on the product or immersing it in water. ● Once the product is placed in a dedicated fixture within the inspection device, waterproofing can be quantitatively confirmed through automatic measurement. ● The target product size is W 300 × D 210 × H 100 mm or smaller. ● The target products include automotive cameras, smartphones, ECUs, small motors, and other packaging containers, and are effective for any products that require confirmation of sealing, waterproofing, and airtightness. ● For product specifications and details, please contact us.

In battery manufacturing lines, if components containing copper are used, there is a possibility that metal powder may mix in, dissolve, ionize, and pass through the separator, causing a malfunction that connects the positive and negative electrodes. Such minute metal powders may not be detected during pre-shipment inspections, and even if they are found, they can lead to various issues, such as the need to increase inspection processes to detect them. Therefore, Fukuda has developed a copper-free (all stainless steel) air leak tester that can be safely used in the production lines of battery manufacturers and secondary battery manufacturing equipment manufacturers. For product specifications and details, please refer to the "Related Product Information" and "Related Catalogs" below.

Introducing a "non-destructive testing device as an alternative to the submerged test" for pharmaceutical packaging products. "Complete vial leak testing device | MSQ-2002 series" Fully automating leak tests for various vials, bottles, eye drops, and cylindrical containers. Please check the link below for videos and catalogs.

For companies struggling with the retention rate of young employees in their 2nd to 3rd year This training focuses on growth and success experiences in professional life, aiming to enhance self-efficacy. At the same time, we will work on mindset to address anxieties, dissatisfaction, and frustrations, motivating participants to apply these insights to their future lives and work. Additionally, we will help them clarify their aspirations and action plans as senior employees, fostering self-awareness and increasing motivation. For more details, please refer to the product information.