"Tabletop-sized high-temperature tensile observation device" High-temperature tensile compression observation device "CATY-T3H" with high-temperature heating, tensile compression, in-situ observation, and atmosphere control also available.

Tests can be conducted while observing the condition of the material surface [using a dual-swing crosshead], keeping the sample position centered to capture any changes!

The "CATY-T3H SYSTEM" is a tabletop-sized high-temperature tensile observation device that allows for thermal fatigue testing while observing the state of the sample surface in real-time. It can be used with simple operations and supports high-temperature and high-speed heating. By adopting a dual-swing crosshead, it maintains the sample's position in the center even if the sample piece expands or contracts, thereby minimizing the displacement of the observation position. By combining with optional units, it can also accommodate tests such as bending observation. 【Features】 ■ Capable of high-temperature and high-speed heating up to 1500°C * However, this depends on the shape and thermal capacity of the sample. ■ Testing of not only metallic materials but also composite materials of surface-mounted components is possible. ■ Stress measurement, low-cycle fatigue testing, and creep testing can be conducted in gas flow or vacuum conditions. ■ Realization of combined testing for thermal fatigue under stress and real-time observation. * For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Strength Testing Equipment

High-resolution in-situ observation under environments up to 1800℃. For research and material development of ceramics, secondary batteries, etc.!

The representative heating observation IR imaging furnace from Mikyo Manufacturing has been equipped with a digital violet laser microscope. It enables clear microscopic observation in ultra-high temperature environments of up to 1800°C. Compared to conventional models, the resolution and brightness have improved by about two times*, allowing for observations with high magnification and high contrast. Please utilize it for research on the behavior of fine structures and material development under high temperatures in steel, non-ferrous metals, ceramics, secondary batteries, and more. *Compared to our conventional model "VL2000DX-SVF17SP" ◆ Key Points ◆ - High-resolution in-situ observation Obtaining high-resolution images under ultra-high temperatures - Realization of diverse observation conditions Rapid heating and rapid cooling up to 1800°C - Excellent operability and controllability High-speed image acquisition accurately linked to temperature By using the optional load mechanism module "SVF12FTC," observations can be conducted under stress loading (up to 5kN) at high temperatures. For more details, please contact us.

• Steel

Minimize work inside the glove box ◎ Screening of solid electrolyte materials / Impedance evaluation by temperature characteristics ◎ Multiple uniform, short time, and accurate test evaluation

It excels in material screening of solid electrolytes and impedance evaluation according to temperature characteristics! ▼Features▼ 1. Reproduces various heating patterns of inorganic electrolyte heating and sintering processes in a short time. - Temperature can be adjusted with an accuracy of ±1°C within a temperature range of 50°C to 1200°C. - The heating rate is also a maximum of 300°C/min, allowing for various heating patterns to be tested in a short time even from room temperature. 2. Efficient simultaneous evaluation of impedance measurements for lithium-ion conductivity (conductivity). - Structure allows for heating with electrodes attached to the top and bottom of the coin cell. - The coin cell holder is prepared for 4 slots. - Uniform heating/measuring of 4 samples simultaneously under the same conditions. - Various coin cell diameters available from Φ20 to Φ8mm. 3. Simple operation and design that prevents exposure to the atmosphere / atmosphere control. - Work inside the glove box involves only setting the samples. - Inside the quartz tube, a quartz coin cell holder is maintained, and only the coin cell is accurately heated. - The completely sealed transparent quartz tube is heated from the outside using light heating. - Gas introduction systems and atmosphere control during heating are also easy to manage. Please contact us for more details.

• Secondary Cells/Batteries
• Lithium-ion battery
• Electric furnace

The low-voltage fuse "BFMN" is a small blade fuse used to protect the electrical circuits of automobiles. When the current increases abnormally, the fuse blows to prevent damage to equipment and wiring. It is recommended for those facing challenges related to circuit protection with low-voltage fuses (below DC 70V) in the automotive and construction machinery industries. It is suitable for protecting circuits of electrical components, comfort equipment, safety devices, and control systems.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

● What is a pneumatic regulator? It is a self-developed pneumatic regulator with a control reproducibility of ±0.1%. We offer a wide range of products from low flow to high flow. ● What is a regulator? Please use it to adjust the test pressure for leak testing. By supplying a stable test pressure, it enables more accurate measurements.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!