We will be exhibiting at the Sewer Exhibition '24 Tokyo. From July 30 to August 2, 2024, at Tokyo Big Sight.

A static mixer that can perform mixing with just an inline plate. Suitable for mixing and agitation of coagulants in individual liquid separation.

The J.M.S. Static Mixer 2800 is a revolutionary inline mixer that mixes with just one plate. Its simple design makes installation and cleaning easy. When used for the injection of coagulants for liquid separation, it enhances the efficiency of separators and contributes to energy savings in factory plants. Additionally, it can be easily utilized by simply installing the plate in the piping like an orifice, making installation straightforward and minimizing installation costs. 【Features】 ■ Contributes to the efficiency of separators ■ Easy to install ■ Installation costs can be minimized *For more details, please download the PDF or contact us.

• Wastewater/wastewater treatment equipment

Removal efficiency of corrosive gases is over 95%! It reduces maintenance frequency and prevents major damage to control equipment in advance. *We will exhibit at the Sewerage Expo '25 in Osaka.

◆Effective for maintaining control panel equipment! You can reduce the frequency of maintenance!◆ It protects independently installed control panels and operation panels from internal corrosion caused by corrosive gases, preventing various losses due to troubles with control and electrical equipment inside the panel. Additionally, it can be adapted to control panels installed in various locations, such as those outside the instrument room or in areas where corrosive gases are present. 【Features】 ■Removal speed: Approximately 0.0 ppm (hydrogen sulfide) in about 400 seconds from 2.0 ppm ■Removal efficiency of over 95% (due to the airtightness of the control panel) ■Three types of MODELS available according to installation space ■Adsorbent modules use recycled paper, considering the environment *For more details, please request materials or download the catalog. ＊＊＊＊Exhibition Information＊＊＊＊ We will exhibit at the Sewerage Exhibition 25 in Osaka. Event period: 2025/7/29-8/1 Booth number: 2-317

• Air purifiers

We conducted a mixing comparison test using plate-type (2800 series) and screw-type (Kenics type) MSE static mixers.

The Saeki-Kaide Laboratory of the Graduate School of Advanced Science and Technology at Yamaguchi University conducted stirring experiments with various static mixers. Targets: - JMS Corporation's plate-type 2800 plate mixer - Kenix-type static mixer (screw type) - MSE static mixer (grid type) As a result, it was confirmed that the JMS Corporation's plate-type 2800 mixer has stirring performance and pressure loss equivalent to that of the Kenix type. The plate mixer can stir with just one plate, making its structure simple and cost-effective. Maintenance tasks such as cleaning are also easy, allowing for minimal investment and running costs.

• Chemicals

An inline mixer that can stir using only an inline plate. Ideal for mixing sodium hypochlorite and for stirring and mixing during chemical dosing neutralization.

The JEMS Static Mixer 2800 is a revolutionary inline mixer that mixes with just one plate. Its simple design makes installation and cleaning easy. By simply installing the Static Mixer 2800 in the piping like an orifice plate, mixing is achieved solely by the fluid's flow within the pipe. Additionally, since only a plate needs to be installed in the piping, installation is straightforward and costs can be minimized. By adopting the JEMS Static Mixer 2800, it is possible to easily and cost-effectively improve energy efficiency and operational efficiency in factories and plants.

• Piping Materials

Sulfur gas: Ideal for the removal of sulfide gas. A chemical adsorbent that removes sulfur gas and sulfide gas in one go through a chemical reaction.

Potassium carbonate removes sulfur gas/sulfide gas in one go. It is ideal for countermeasures against hydrogen sulfide gas (H2S) and sulfur dioxide gas (SO2). Reaction equation with hydrogen sulfide gas: H2S + 2KOH + 2O2 → K2SO4 + 2H2O Reaction equation with sulfur dioxide gas: SO2 + 2KOH → K2SO3 + H2O

• Gas Filters

Measures against corrosive gases (hydrogen sulfide gas) generated from the wastewater treatment facility have been implemented. This has eliminated equipment failures and contributed to improving the factory's operating rate.

Hydrogen sulfide gas is generated in the wastewater treatment process of meat processing plants. Even at gas concentrations of a few ppb (1/1000 of ppm), this hydrogen sulfide gas can have a significant impact on equipment. The contact points of the equipment in the wastewater treatment facility can corrode, leading to equipment failure. JMS Corporation provides comprehensive support from the investigation of corrosive gases (hydrogen sulfide gas) to countermeasures. First, we conduct an investigation into the pathways and causes of hydrogen sulfide gas intrusion, as well as an environmental risk analysis. After the investigation, we will propose optimal environmental improvements tailored to your site. ＊＊＊＊Exhibition Information＊＊＊＊ We will be exhibiting at the Sewerage Exhibition 25 in Osaka. Event Period: 2025/7/29-8/1 Booth Number: 2-317

• Wastewater/wastewater treatment equipment

The average flow velocity in the piping can be easily measured with a porous pitot tube.

The Pitot tube has a rod-like shape. It is inserted vertically into the piping to measure flow rate. Holes are provided on the rod to detect total pressure and static pressure. By measuring the differential pressure (also called dynamic pressure), the flow velocity of the fluid flowing in the pipe can be determined. The multi-hole Pitot tube has multiple holes on the rod that comply with JIS B 8330, allowing for the measurement of average flow velocity. The two pressure sensing pipes that exit the Pitot tube are connected to the high-pressure and low-pressure sides of a differential pressure transmitter. The differential pressure is converted to flow rate through square root calculation processing by the differential pressure transmitter. It is often used for measuring exhaust gas flow rates in large-diameter ducts. Large-diameter ducts (300A or 500A and above) cannot be manufactured with orifice plates or are very costly, making the Pitot tube flow meter a strong option. Among flow meters, the Pitot tube is simple and relatively low-cost.

• Flow Meter

To prevent clogging of the measurement hole, which is a weakness of the Pitot tube, continuous purging is performed during measurement to prevent blockages. It is ideal for measuring flow rate and flow velocity in large-diameter flues.

Flow measurement is one of the most important measurement items in the field of industrial measurement. When measuring the flow rate of fluids (liquids and gases), a method that utilizes the pressure difference before and after a restriction mechanism, such as an orifice, flow nozzle, venturi, or pitot tube, installed in the pipeline through which the fluid flows, is most commonly used in industrial measurement and its automatic control. Accurate and reliable flow measurement leads to effective plant operation, efficient energy use, environmental conservation, improved safety, and overall cost reduction. The specialized technology for selecting and installing flow meters ensures smooth plant operation and prevents unexpected shutdowns and troubles. JM Systems Co., Ltd. provides a comprehensive service from planning, development, design, manufacturing, to maintenance as a specialized manufacturer of polynomial pitot tubes.

• Flow Meter

One-time removal of hydrogen sulfide gas generated from the sulfuric acid treatment and wastewater treatment facilities of recycled paper, board, and cardboard manufacturing plants. Protects control equipment from hydrogen sulfide gas.

Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. The Coro Shooter removes hydrogen sulfide gas and prevents equipment failure due to corrosion. Hydrogen sulfide gas is generated in sulfuric acid treatment and wastewater treatment facilities at recycling, paperboard, and cardboard manufacturing plants. Even trace amounts of hydrogen sulfide gas that do not affect human health can have a significant impact on equipment. Hydrogen sulfide gas at levels of just a few tens of ppb can cause equipment failure due to corrosion. By installing the Coro Shooter inside the control panel where the equipment is housed, you can purify the air inside the panel and prevent equipment failure caused by hydrogen sulfide gas. Since it can be installed directly in the panel, it is a simple and low-cost solution for addressing hydrogen sulfide gas. ＊＊＊＊Exhibition Information＊＊＊＊ We will be exhibiting at the Sewerage Exhibition 25 in Osaka. Event Period: 2025/7/29-8/1 Booth Number: 2-317

• Paper and pulp

It is ideal for process improvement in the carbon dioxide mixing line of the lime factory. It allows for stirring without using power, enabling energy conservation and efficiency in the production line.

This is an inline mixer that performs stirring with a single plate. By simply installing the mixer plate in the piping, stirring can be carried out within the piping. It is used for mixing carbon dioxide with lime, among other applications.

• Mixer/agitator

It is a differential pressure flow and velocity sensor, a porous Pitot tube "Barflow tube." Compared to orifice flow meters, it allows for low pressure loss and energy-saving measures.

Flow measurement is one of the most important aspects in the field of industrial measurement. When measuring the flow rate of fluids (liquids and gases), methods that utilize pressure differences before and after a constriction mechanism, such as orifices, flow nozzles, Venturi tubes, and Pitot tubes, installed in the pipeline where the fluid flows, are most commonly used in today's industrial flow measurement and its automatic control. Accurate and reliable flow measurement leads to effective plant operation, efficient energy use, environmental conservation, improved safety, and overall cost reduction. The specialized technology for selecting and installing flow meters ensures smooth plant operation and prevents unexpected shutdowns and troubles. JMS Co., Ltd. provides a comprehensive service from planning, development, design, manufacturing, to maintenance as a specialized manufacturer of polynomial Pitot tubes. We have a cumulative shipping record of over 10,000 units.

• Flow Control

We have extensive experience in measuring exhaust gas flow nationwide. We can also accommodate special materials such as SUS310, Hastelloy, and titanium, in addition to SUS316.

By simply inserting a porous pitot tube into the flue, it is possible to measure the flow rate and velocity of exhaust gases within the flue. Therefore, it enables low-cost measurement of exhaust gas flow rate and velocity without the need for extensive construction. The pitot tube has lower pressure loss compared to orifices and venturi meters, contributing to energy-saving operations for the entire plant. Our pitot tube flow meter, the Bar Flow Tube, is produced under a fully integrated system in our own factory, covering planning, design, procurement, manufacturing, inspection, and maintenance. We have established a management system that ensures customer satisfaction. We aim for the adoption of our Bar Flow Tube to assist in improving your processes.

• Flow Meter

An inline mixer that achieves simpler and more compact drainage neutralization treatment.

Generally, geothermal power generation extracts steam and hot water from deep underground, using the steam for electricity generation. The remaining hot water exchanges thermal energy with rivers and other sources and is reused as warm water for various purposes. However, the hot water contains various compounds, which are neutralized before being returned to the deep underground. Thus, the wastewater generated from geothermal power generation needs to be managed properly by controlling pH and treating it in accordance with legal regulations. To neutralize the alkaline components in the wastewater, an acidic solution is added, and during this neutralization process, the Static Mixer 2800 is employed. Using an inline mixer for neutralization allows for consistent stirring under certain conditions, achieving stable neutralization treatment. Additionally, if the concentration of the injected acidic solution is high, corrosion protection measures for the mixer need to be implemented. Previously, geothermal power plants used the Kenics type mixer, but from a corrosion perspective, they have switched to the Static Mixer 2800. In the case of the Static Mixer 2800, its simple structure allows for more cost-effective manufacturing with special materials (such as titanium or Hastelloy) and fluorine coatings compared to the Kenics type. It is being utilized in the waste alkaline water process.

• Wastewater/wastewater treatment equipment

Gas monitoring and removal of low-concentration hydrogen sulfide gas generated from the manufacturing process of sulfide-based all-solid-state batteries.

The main reason hydrogen sulfide gas is generated during the manufacturing process of sulfide-based solid-state batteries is due to the materials and reactions used in the manufacturing process. In the manufacturing process, the materials that make up the components of sulfide-based solid-state batteries include sulfides. When these sulfides are heated or undergo chemical treatment, they may decompose and produce hydrogen sulfide gas. In battery manufacturing, multiple reactions can occur simultaneously. In some reaction processes, sulfides may change, resulting in hydrogen sulfide being produced as a byproduct. The manufacturing of sulfide-based solid-state batteries may involve high-temperature processing. When materials change at high temperatures, there is a possibility that sulfides will decompose and generate hydrogen sulfide. If incomplete reactions occur during the process or if impurities are present, this may contribute to the generation of hydrogen sulfide from sulfides. Since hydrogen sulfide gas is toxic and hazardous, monitoring and removal of hydrogen sulfide gas are necessary in factories and research facilities.

• Secondary Cells/Batteries

Instant removal of hydrogen sulfide gas generated from wastewater facilities of sugar factories, meat processing plants, beverage factories, canneries, etc. Protects control equipment from hydrogen sulfide gas.

Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. The Coro Shooter removes hydrogen sulfide gas and prevents equipment failure due to corrosion. In the wastewater process of food factories, trace amounts of hydrogen sulfide gas are generated. Although it is said that trace amounts of hydrogen sulfide gas do not affect human health, the impact on equipment is significant. Even hydrogen sulfide gas at levels of a few tens of ppb can cause equipment failure due to corrosion. If you install the Coro Shooter inside the control panel where the equipment is housed, it will purify the air inside the panel and prevent equipment failure caused by hydrogen sulfide gas. Since it can be installed directly in the panel, it is possible to implement measures against hydrogen sulfide gas easily and at a low cost.

• Other food machinery

It is a device for removing chlorine gas generated during the cleaning of products. By removing chlorine gas, it protects the control equipment in the cleaning process from corrosion caused by chlorine gas.

Chlorine gas is removed using a chemical adsorbent. Since the gas is removed through a chemical reaction, there is no concern about the gas being released again, allowing for reliable removal of the gas. Our chemical adsorbent-based color shooter purifies the air and removes chlorine gas within the control panel of the device.

• PLC

Ideal for deodorization and desulfurization. It provides clean air.

This is an adsorbent that removes chlorine gas through a chemical reaction. It prevents corrosion caused by chlorine gas. Unlike physical adsorbents like activated carbon, chemical adsorbents remove gas through chemical reactions, so there is no concern about gas re-release.

• Gas Filters

Remote monitoring of low concentrations of hydrogen sulfide gas can be performed. Data can be checked on a browser. When the gas concentration rises, an alarm will be issued via Line.

This is a gas concentration meter with a logger that monitors low-concentration hydrogen sulfide gas wirelessly. It is specifically designed for low concentrations, making it effective for odor monitoring and tracking of corrosive gases. Hydrogen sulfide gas is rarely constant; it can rapidly increase in concentration in a short period due to wind direction and site conditions. Without continuous gas observation, it is very difficult to detect an increase in gas concentration. By installing our wireless low-concentration hydrogen sulfide gas concentration meter, continuous monitoring can be conducted, allowing for the capture of events where gas concentration rises.

• Data Logger

This is a concentration meter that monitors low concentration hydrogen sulfide at ppb levels using wireless gas monitoring. It is ideal for continuously monitoring the intrusion of low concentration hydrogen sulfide gas.

By installing it at sites where equipment is failing due to corrosion from hydrogen sulfide gas, you can monitor the timing of hydrogen sulfide gas intrusion in real-time. The gas concentration meter is battery-operated, so there is no need for complicated power installation. You can monitor hydrogen sulfide gas concentration simply by installing the meter at the concerned site. Communication uses mobile networks, so it can be installed anywhere there is mobile signal coverage. When the concentration of hydrogen sulfide gas rises, it will notify you of the gas information via LINE. You can share information about hydrogen sulfide gas concentration within a LINE group, which can be utilized for collective improvement activities at the site. The chromatogram of hydrogen sulfide gas data can be checked online, making it easy to confirm using a mobile phone or computer.

• Wastewater/wastewater treatment equipment

Conduct an investigation into sulfur-based gases generated in the sulfurization process and diagnose the risks. Prevent equipment failures with gas removal devices and improve factory operating rates.

In the tire factory's vulcanization process, sulfur-based gases are generated. The emitted sulfur-based gases are at a low concentration of several tens of ppb, which do not affect the human body, but they are highly corrosive and can cause failures in the contact parts of machinery. Additionally, corrosion of chip resistors can change their resistance values, leading to reported cases of affecting the operation of control devices. JMS Corporation provides comprehensive support from the investigation of sulfur gases to countermeasures. First, we conduct an investigation into the entry routes and causes of sulfur-based gas, as well as an environmental risk analysis. After the investigation, we will propose the most suitable environmental improvements tailored to the customer's site.

• Odor Testing

This is a gas concentration meter that can measure hydrogen sulfide gas concentrations at low levels of ppb. It supports new innovations related to low concentrations of hydrogen sulfide gas.

1/1000 of 1ppm. This is a gas detector that can accurately measure ultra-low concentrations of hydrogen sulfide gas. It is equipped with a suction pump, allowing for localized gas concentration measurements using connection tubes, as well as measurements of process gases and from gas bags.

• Fine Ceramics

We have been involved in volcanic gas work for 50 years. We are an established company specializing in the removal, observation, and research and development of volcanic gases.

(1) Removal of Volcanic Gases Sulfur dioxide and hydrogen sulfide gases are highly corrosive components that can corrode metals and cause equipment failures. To prevent equipment failures in volcanic areas, hot spring regions, and geothermal power plants, we manufacture and sell devices for the removal of volcanic gases. We have numerous achievements in volcanic tourist areas and hot spring regions. (2) Observation of Volcanic Gases We manufacture, sell, and maintain volcanic gas (hydrogen sulfide and sulfur dioxide) observation disaster prevention systems for volcanic tourist areas across Japan. (3) Research and Development of Volcanic Gases We are also engaged in research and development on volcanic gas themes in collaboration with universities conducting Earth science research. We present our research at volcanology conferences and have obtained patents through industry-academia collaboration with universities.

• Gas Filters

We will solve the hydrogen sulfide gas problem within the geothermal power plant.

The steam used for power generation at geothermal power plants contains hydrogen sulfide gas components. Even low concentrations of hydrogen sulfide gas, which do not affect the human body, can have a significant impact on the control equipment within the power plant. Hydrogen sulfide gas is invisible and has a heavy specific gravity, allowing it to infiltrate the electrical rooms and control rooms that manage the power plant through various pathways, leading to corrosion and failure of the equipment. JM Solutions Co., Ltd. provides total support for hydrogen sulfide measures within geothermal power plants, from investigation to countermeasures.

• Other energy equipment

Optimized for promoting the diffusion of urea water with an inline mixer. It facilitates the mixing of urea water and exhaust gases throughout the flue, improving denitrification efficiency.

The SRC (Selective Catalytic Reduction) system is a device used to remove nitrogen oxides (NOx) from exhaust gases. It is primarily used to reduce NOx in combustion exhaust gases generated in power plants and industrial processes. The basic principle of the SRC system is to reduce nitrogen oxides using urea or ammonia. This reaction converts nitrogen oxides into nitrogen and water, thereby reducing harmful exhaust gases. SCR technology is particularly effective in reducing NOx in exhaust gases generated at high temperatures, such as those from diesel engines and coal-fired power plants. It has been implemented in many industrial processes for environmental protection and regulatory compliance. The use of a static mixer facilitates the mixing of exhaust gases and urea solution, improving the denitrification rate.

• Mixer/agitator

Efficient mixing of coagulants and energy-saving in the sludge concentration process.

A centrifuge is a device that generates centrifugal force by high-speed rotation to separate components of a liquid mixture. Coagulants are used to optimize this separation process by causing fine particles and impurities in the liquid mixture to aggregate or precipitate, thereby activating the separation process. When mixing the liquid mixture with the coagulant, properly stirring the coagulant allows for rapid centrifugation. A static mixer 2800 is used in this mixing, enabling efficient centrifugation and contributing to energy savings in the plant by reducing operating time. Additionally, cleaning is easy, and maintenance is very high, allowing for a reduction in running costs after adoption.

• centrifuge

It is capable of measuring high concentrations of hydrogen sulfide from 0 to 2000 ppm. Continuous measurement is possible for up to 6 months with a long-life battery.

Continuous measurement for up to 6 months is possible. Measurements can be taken in the range of 0-2000 ppm and high concentration levels. No electrical work is required. You can simply hang the concentration meter at the site you want to measure to record the trends of hydrogen sulfide gas. (Please be careful not to submerge it.)

• Area Sensor

Advantages and disadvantages of each hydrogen sulfide gas removal method.

There are various methods for removing hydrogen sulfide gas. In this instance, we conducted comparative experiments using (1) chemical adsorbent methods and (2) photocatalytic methods, which are commonly adopted for hydrogen sulfide gas countermeasures. We filled a 1m³ container with 3.4 ppm (3400 ppb) of gas and compared the removal performance of the chemical adsorbent method and the photocatalytic method. According to the data in the graph, it was found that the chemical adsorbent method sharply decreased the gas concentration compared to the photocatalytic method. While the photocatalytic method took about 120 seconds to reduce the concentration from 3.4 ppm to 0 ppm, the chemical adsorbent completed the removal in approximately 40 to 50 seconds. It can be concluded that by adopting a removal device using a chemical adsorbent, it is possible to minimize the time that electronic devices are exposed to hydrogen sulfide gas when it intrudes.

• filter

Even low concentrations of hydrogen sulfide gas can have a significant impact on equipment. Corrosion can lead to failures at the contact points of the equipment.

Hydrogen sulfide gas is highly toxic, and concentrations of hydrogen sulfide gas above 10 ppm can lead to a diminished sense of smell, with headaches and nausea potentially occurring quickly. At high concentrations around 800 ppm, the risk of acute poisoning increases, and the possibility of death arises. However, even at low concentrations of hydrogen sulfide gas at the ppb (0.05 ppm) level, which have no impact on the human body, the effects on equipment can be significant. According to ISA standards, gas management for electrical control equipment is required to be below 50 ppb. Machinery is more vulnerable to hydrogen sulfide gas than humans, necessitating strict management.

• Odor Testing

This is a device that generates calibration gas used for the calibration work of gas detectors. It is compatible with NIST traceability.

Calibration gas is generated without using gas cylinders. It is ideal for calibrating gas detectors. Since gas cylinders are not required, the hassle of managing high-pressure gas cylinders is eliminated. The device is also compact and lightweight, making on-site calibration of gas detectors easier. If you replace the gas generation cell, it is possible to generate H2, Cl2, ClO2, HCN, and H2S gases at your desired gas concentration. It is also possible to handle ClO2 and HCN, which are difficult to procure with gas cylinders. If you adjust the desired gas concentration and generation flow rate, calibration gas will be generated.

• Gas Generator
• Other measurement, recording and measuring instruments
• Odor Testing

Instant removal of hydrogen sulfide gas. We protect equipment by removing hydrogen sulfide gas generated from vulcanization in tire and rubber factories.

Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. The Coro Shooter removes hydrogen sulfide gas and prevents equipment failure due to corrosion. In the vulcanization process at tire and rubber factories, trace amounts of hydrogen sulfide gas are generated. Although these trace amounts of hydrogen sulfide gas do not affect human health, their impact on equipment is significant. Even hydrogen sulfide gas at levels of a few tens of ppb can cause equipment failure due to corrosion. By installing the Coro Shooter inside the control panel where the equipment is housed, you can purify the air inside the panel and prevent equipment failure caused by hydrogen sulfide gas. Since it can be installed directly in the panel, it is possible to implement measures against hydrogen sulfide gas easily and at a low cost. [Advertisement] We will be demonstrating the Coro Shooter at INCHEM TOKYO 2023. https://www.jma.or.jp/INCHEM/ We look forward to your visit. Date: September 20-22, 2023 Venue: Tokyo Big Sight Booth Number: 2X07

• Board to Board Connectors
• Vehicle body parts
• Other environmental equipment

It is a chemical adsorbent that can remove ammonia gas in chemical reactions. It is ideal for interference gas measures against ammonia in gas analyzers.

It is a chemical adsorbent that removes ammonia gas through a chemical reaction. Since it removes gas through chemical adsorption, there is no re-release of the gas, making it possible to reliably eliminate ammonia gas.

• Analytical Equipment and Devices
• Hazardous material processing
• Gas Filters

It is a portable calibration gas generator. Since it can generate gas on-site, it is ideal for the maintenance of gas detectors.

Since gas cylinders will no longer be needed, the troublesome management of cylinders will not be necessary. We also accommodate gas types that cannot be provided by gas cylinders, such as hydrogen cyanide (HCN) and chlorine dioxide (ClO2). By replacing the gas cell, it is possible to generate a variety of gases.

• Gas Generator
• Odor Testing
• Ventilation and Exhaust

The equipment failure at the wastewater treatment facility may be caused by hydrogen sulfide gas. We will conduct a site investigation for the invisible hydrogen sulfide gas and assist with countermeasures.

Hydrogen sulfide gas is a highly corrosive and harmful gas. Exposure to hydrogen sulfide gas can cause corrosion (rust) on the copper and silver parts of equipment, leading to equipment failure. Although trace amounts of hydrogen sulfide gas may not affect human health, the impact on equipment is significant. Even hydrogen sulfide gas at concentrations of a few tens of ppb can cause equipment failures due to corrosion. Hydrogen sulfide gas generated during wastewater treatment can infiltrate control equipment through pipes and cables. Low-concentration hydrogen sulfide gas floats within factories, and visualizing this invisible gas is very challenging. JMS Co., Ltd. acts as an expert in hydrogen sulfide gas, providing visualization of hydrogen sulfide gas and assisting in process improvements.

• Wastewater/wastewater treatment equipment

Ideal for use in corrosive gas, saline corrosive environments, and high humidity locations!

The VR-500 series products are spray can types of phenolic resin-based paint, which can be easily applied for corrosion protection as they air dry. The VR-500 series products create a protective film that excels in durability, adhesion, and flexibility, making them suitable for use in corrosive gas environments, saline corrosive atmospheres, and high humidity locations. Since they come in a spray can type, a primer is not necessary. For more details, please download and view the catalog. They are available for procurement on Amazon.

• paint

Features ● PICO-ITX standard ● Equipped with Intel Core Ultra 7 255U / Ultra 5 225U ● 16/32GB onboard memory ● 2.5GbE + 1GbE ● HDMI 1.4 + eDP 1.4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA) ● M.2 2230 E-Key x 1 (PCIe 4.0 [x1] + USB 2.0) ● USB 3.2 Gen 2 x 2 + USB 2.0 x 2 ● RS-232/422/485 x 2 ● TPM, GPIO 4-bit, SATA 6Gb/s x 1 ● SMBus/I2C (Default: SMBus) ● Intel AMT Support * This model does not include storage or OS.

Features: ● PICO-ITX standard ● Equipped with Intel Atom x7433RE/x7835RE ● DDR5 4800MHz×1 (up to 16GB) (sold separately) ● HDMI 1.4×1, eDP 1.4b/LVDS×1 ● 2.5GbE×1, GbE×1 ● Full-Size mSATA, M.2 2230 E-key x1 ● USB 3.2 Gen2[x1]×2, USB 2.0×4 ● RS-232/422/485×2, RS-232×2 ● TPM 2.0, SATA 6.0Gbps×1, GPIO 4-bit, SMBUS/I2C×1 * This is a model without an operating system.

Features: ● Equipped with Intel Processor N150 / Intel Core 3 Processor N355 ● DDR5 4800MHz SODIMM ×1 (supports up to 16GB) (sold separately) ● HDMI 1.4 ×1, eDP 1.4b / LVDS ×1 ● Intel Ethernet Controller I226 (2.5GbE RJ-45 ×1), Realtek RTL8111H (1GbE RJ-45 ×1) ● Full-size mSATA / mPCIe ×1, M.2 2230 E-Key ×1 ● USB 3.2 Gen2[x1] ×2, USB 2.0 ×4 ● RS-232/422/485 ×2, RS-232 ×2 ● TPM 2.0, SATA 6Gb/s ×1, 4-bit GPIO, SMBus / I2C ×1 ● Fan-equipped heat sink available separately PICO-ASL4-FAN01: Heat sink with fan PICO-ASL4-HSK01: Heat sink PICO-ASL4-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure) * This is a model without an operating system.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.