【TTL】Board Power-On Test Device 'TY-CHECKER DS401' Semi-Automatic Type, a power-on testing machine for printed circuit boards, capable of high-frequency testing in a semi-automatic manner (continuity testing, insulation testing, four-terminal testing, micro-short detection).

In addition to high-precision step feeding electrical tests in the x and y directions, high-frequency testing is also possible! (Continuity testing, insulation testing, four-terminal testing, micro-short detection)

The "TY-CHECKER DS401" is a powered inspection system that adds X-direction movement (horizontal movement) to the conventional Y-direction step-and-repeat transport. Since the device is semi-automatic, the entire front of the machine is almost open, making it easy to handle the workpieces. It is designed to be valuable in product development and production technology settings. Transitioning to mass production can be done smoothly by adopting the AT type. It supports both a unique dedicated plate holding method that does not apply tension and a tension (chuck) holding method, allowing for selection based on the product. By swapping out the measurement section, high-frequency characteristic testing can be performed either on sheets or individual pieces, leveraging the advantages of a fixed jig to achieve stable semi-automatic high-frequency testing. (Automatic operation is also possible with the 401AT.) 【Features】 ■ Maximum substrate size: 305mm × 510mm ■ Step-and-repeat transport in the XY direction ■ Contributes to downsizing of jig head (reducing jig costs) ■ Selectable product holding methods ■ Continuity, insulation, 4-terminal testing, micro-short detection ■ Compatible with high-frequency characteristic testing #SubstrateInspection #InspectionSystem #PoweredInspection #ElectricalTesting #Short #Open #FourTerminal #MicroShort

• Other inspection equipment and devices

The basic form of the electrical testing system is used for electrical inspection of various substrates (PCB, FPC, continuity testing, insulation testing, four-terminal testing, spark testing).

This is a manual power-on inspection system of the one-plate type. With over 35 years of proven experience, the reliable TY-CHECKER series! (Continuity, insulation, four-terminal, micro-short, spark testing, etc.) Please feel free to consult us regarding various specifications. 【Features】P20E ■ Maximum inspection size: 550×340mm ■ Equipped with a micrometer adjustment mechanism for the lower fixture. ■ Designed with safety considerations for both the working side and the back side. #CircuitBoardInspection #InspectionEquipment #PowerOnTesting #ElectricalTesting #Continuity #Insulation #Open #Short #Leak #FourTerminal #Testing

• Circuit Board Inspection Equipment

Achieving stable electrical testing through independent plate transportation. (Continuity testing, insulation testing, four-terminal testing, micro-short detection, spark) FPC, long length.

The "TY-CHECKER DS301" is a Y-direction step-and-repeat electrical inspection device designed for long FPC (flexible printed circuit boards). It is ideal for continuity and insulation testing of automotive FPCs and similar applications. (It also supports rigid-flex and hard boards!) Thanks to its unique dedicated plate holding method that does not apply tension, stable inspections are possible. *Stable inspections can be achieved even with cutouts such as slits. 【Features】 ■ Maximum inspection size: 610×270mm ■ Automatic alignment for upper and lower sections. ■ Learning-type alignment is standard equipment. ■ High-precision inspection unit included. ☐ CE compliant *For more details, please refer to the PDF document or feel free to contact us. #BoardInspection #InspectionEquipment #ElectricalTesting #Continuity #Insulation #FourTerminal #Open #Short #Leak

• Circuit Board Inspection Equipment

Kyoei System - 44MD Jig Compatible Machine! Achieving high-speed inspection and high-speed mechanical tact! Fully automatic continuity, insulation, and four-terminal testing of rigid substrates.

The "TY-CHECKER DG430MW" is a fully automatic live circuit inspection device that achieves high-speed inspection and high-speed mechanical contact. The process from input to output is completed in about 5 seconds, making it suitable for mass production inspections. With the four-terminal measurement specification, it can measure only the resistance of the circuit board without being affected by wiring resistance or contact resistance. Additionally, by using a dedicated adapter, your existing 44MD fixtures can be used with this device. Our company, in partnership with Kyoei System, enables stable operation with the "DG." 【Features】 ■ High-speed inspection ■ High-precision four-terminal measurement support ■ Compatible with Kyoei System 44MD fixtures *For more details, please refer to the PDF document or feel free to contact us. #CircuitBoardInspection #LiveCircuitInspection #ElectricalInspection #Open #Short #FourTerminal #FourTerminalMeasurement #MicroShort

• Circuit Board Inspection Equipment

Sheet substrate electrical testing system! (Continuity testing, insulation testing, four-terminal testing, micro-short detection) FPC, flexible substrates, PCB, PKG

The "TY-CHECKER DS series" is a power continuity inspection system optimized for sheet substrates represented by FPC (Flexible Printed Circuit Board). It adopts a unique dedicated plate holding method (patented) that does not apply tension, achieving stable transport even for ultra-thin FPCs and flex circuits after punching. The inspection unit is equipped with a high-precision checker, capable of conducting continuity tests, insulation tests, four-terminal tests, and micro-short detection. 【Features】 ■ Unique transport system: Dedicated plate transport method ■ Equipped with a unique dual alignment system! 　□ Learning-type camera-less alignment 　□ Built-in camera alignment within the fixture ■ Various fixtures (wire-type and composite-type) can be installed, allowing for cost reduction. *For more details, please refer to the PDF document or feel free to contact us. #BoardInspection #InspectionEquipment #PowerContinuityTest #ElectricalTest #Continuity #Insulation #Open #Short #Leak #FourTerminal #Inspection

• Semiconductor inspection/test equipment
• Other inspection equipment and devices
• Circuit Board Inspection Equipment

The printed circuit board electrical testing machine can perform high-frequency testing automatically/semi-automatically (continuity testing, insulation testing, four-terminal testing, micro-short detection).

The "TY-CHECKER DS401 (AT)" is a powered inspection system that adds X-direction movement (horizontal movement) to the conventional Y-direction step and repeat transport. It supports both a unique dedicated plate holding method that does not apply tension and a tension holding method, allowing for selection based on the product. By swapping out the measurement section, high-frequency characteristic testing can be performed on sheets or individual pieces, achieving stable automatic/semi-automatic high-frequency inspection by leveraging the advantages of a fixed jig. 【Features】 ■ Step and repeat transport in the XY direction ■ Contributes to downsizing of jig head (reducing jig costs) ■ Selectable product holding methods ■ Compatible with high-frequency characteristic testing *For more details, please refer to the PDF materials or feel free to contact us. #CircuitBoardInspection #InspectionEquipment #PoweredInspection #ElectricalTesting #Continuity #Insulation #Open #Short #Leak #FourTerminal #Testing

• Other inspection equipment and devices

A wide range of lineups based on the number of points! High-speed, high-precision inspection tester [continuity testing, insulation testing, four-terminal testing, micro-short detection].

The "Type E" is an electrical testing machine that achieves high-speed and high-precision inspections. It has a compact design that does not take up much space, allowing it to be placed on a desk. We offer a wide range of options to choose from based on inspection requirements, including the number of points, high-precision four-terminal testing, and micro-short testing. Additionally, it can be connected to hand presses or jigs that you may already own for use. 【Features】 ■ A tester that forms the core of the electrical testing system "TY-CHECKER series" ■ Compact design ■ Abundant options ■ Excellent versatility #BoardInspection #TestingEquipment #PowerOnTesting #ElectricalTesting #Continuity #Insulation #ShortCircuit #OpenCircuit #FourTerminal

• Circuit Board Inspection Equipment

The basic form of the electrical inspection system! It is used for electrical inspection of various types of substrates. (Rigid substrates, FPC, PCB, continuity testing, insulation testing, four-terminal testing)

This is a standard electric testing system of the one-plate type. With over 35 years of proven track record, the reliable TY-CHECKER series! (Continuity, insulation, four-terminal, micro-short, spark testing) Please feel free to consult us about various specifications. 【Features】 ■ Maximum inspection size: 550×340mm ■ Equipped with a micrometer adjustment mechanism for the lower fixture. ■ Designed with safety considerations for both the working side and the back side. #CircuitBoardInspection #PowerOnTesting #ElectricalTesting #Open #Short #FourTerminal #Testing

• Circuit Board Inspection Equipment

<Title> Development of Gene Expression Control Technology through RNA Hacking In the latest presentation paper, we have utilized Abby. Associate Professor Yosuke Katsuta from Kumamoto University Graduate School of Advanced Science and Technology, Analytical Chemistry Laboratory (also co-founder of StapleBio), will be giving a presentation in an online seminar. He is working on the development of RNA hacking technology aimed at controlling gene expression by utilizing short nucleic acids named Staple to change the higher-order structure of target mRNA. He will present the latest data focusing on the results of cell experiments and animal experiments in the development of this technology. Related paper on the presentation content: Staple oligomers induce a stable RNA G-quadruplex structure for protein translation inhibition in therapeutics | Nature Biomedical Engineering

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.