An interview article was published in the July 2024 issue of "Monthly Amusement Japan."

Exceeding the requirements of the ErP 2015 directive! A fan with stepless variable speed that achieves an average energy saving of 30%.

The "MCF Series" is a continuously variable speed fan manufactured using EC centrifugal fans from the German company ebmpapst, designed as a ventilation fan for equipment. It achieves an average energy saving of 30% and high efficiency through continuous rotation with an internal circuit in the EC motor. 【Recommended for】 - Those who want to operate large-capacity fans with low power consumption - Those who want to reduce electricity costs - Those who want to minimize noise - Those who are struggling with duct design - Those who want to reduce construction during new installations or renovations - Those who want to integrate without an inverter - Those who want to improve indoor air quality 【Features】 - It delivers equivalent performance regardless of the region, whether 50Hz or 60Hz. - It reduces noise at all speeds, with excellent quietness at low speeds. - It allows for speed control via the volume of the main unit and communication control through RS485 communication using ModbusRTU. - By using the optional "Differential Pressure Controller," CAV (Constant Air Volume Control) can be easily achieved. *For more details, please download the PDF or feel free to contact us. If the PDF download button is not displayed, please download it from the special site linked below.

• Fan Filter Unit

It is a fan for equipment that achieves world-class energy savings!

The "MCF Series" is a continuously variable speed fan manufactured using EC centrifugal fans from the German company ebmpapst, designed as a ventilation fan for equipment. It achieves continuous rotation with an integrated circuit in the EC motor, realizing an average energy savings of 30% and high efficiency. Due to its large airflow, it is also effective for ventilating wide spaces! Additionally, by incorporating various sensor systems, it can provide optimal airflow control based on the number of people present. Please use it for ventilation in wide spaces such as factories and offices, or in places with a lot of foot traffic. *For more details, please download the PDF or feel free to contact us. If the PDF download button is not displayed, please download it from the special site linked below.

• Fan Filter Unit

Compact with an integrated wing and motor! A plug-and-play fan with stepless airflow adjustment that does not require a motor protection device.

The "MCF Series" is a continuously variable speed fan manufactured using EC centrifugal fans from the German company ebmpapst, designed as a blower for equipment. With a built-in circuit in the EC motor, it achieves continuous rotation, realizing an average energy saving of 30% and high efficiency. The low power consumption of the MCF Series contributes to reducing electricity costs. 【Recommended for】 - Those who want to reduce electricity costs - Those who want to operate large-capacity fans with low power consumption - Those who want to minimize noise - Those who want to reduce construction during new installations or renovations - Those who are struggling with duct design 【Features】 - A Plug & Play all-in-one blower that does not require a motor protection device - Comes with a volume control for airflow adjustment built into the main unit, eliminating the need for separate installation of the volume control! - Airflow adjustment is also possible with the built-in motor, so no inverter is needed! - The fan's ON/OFF and airflow adjustment can be operated via external signals. *For more details, please download the PDF or feel free to contact us. If the PDF download button is not displayed, please download it from the special site linked below.

• Fan Filter Unit

Dramatically reduce noise! Stepless variable speed fan that contributes to improved comfort [Eligible for energy-saving subsidies].

The "MCF Series" is a continuously variable speed fan designed for equipment use, utilizing EC centrifugal fans manufactured by the German company ebmpapst. It achieves continuous rotation through an internal circuit in the EC motor, realizing an average energy savings of 30% and high efficiency. 【Recommended for】 - Those who want to reduce noise - Those who want to operate large airflow fans with low power consumption - Those who are struggling with duct design 【Features】 - The flow grid is mounted on the intake side to suppress unpleasant low-frequency noise. - Compared to general equipment fans at the same operating point, it is "low noise." - The noise level when the rotation speed is reduced to 50% is approximately -15 dB. Reference: When half of the fans are turned off using quantity control, the noise reduction is about -3 dB. *For more details, please download the PDF or feel free to contact us. If the PDF download button is not displayed, please download it from the special site linked below.

• Fan Filter Unit

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

Dear Sir/Madam, I would like to express my sincere congratulations on your continued prosperity. I also wish to extend my heartfelt gratitude for your exceptional support. Now, I regret to inform you that we will be discontinuing the manufacturing and sales of the following product, which you have long supported. ■ Product in question: TIC Corporation's tubing dispenser and hand switch ■ Product page: For product details, click here ■ Discontinuation date: End of July 2025 ■ Alternative product: MCRP type roller pump / pen-type hand switch If you have any questions regarding this matter, please feel free to contact our representative. We sincerely hope for your continued patronage in the future. Thank you very much.

The delivery time for the following models is currently about 4 weeks. - Standard specification model with full scale from 2 mL/min to 500 L/min (M/MB/MC series) - Low pressure loss model with full scale from 2 mL/min to 100 L/min (MW/MWB/MCW series) *Delivery times may vary depending on the type of options, so please inquire. *The delivery time for the controller may vary depending on pressure conditions, so please inquire. The delivery time for other models is approximately 2 to 3 months. For more details, please request a quote or consultation.

At Same Sky, we continuously manufacture and sell magnetic buzzers and piezo buzzers. Among them, we have received numerous inquiries about the EOL products of piezo buzzers made by Murata Manufacturing, so we have listed our products that are considered to be as close as possible.