A non-contact light touch sensor "HA-T Series" that realizes "wanting to open in a narrower range and in a limited manner" based on the surrounding environment of automatic doors.

Unobtrusive flat design! Adapts to various door types with four detection range settings.

The "HA-T520" is a non-contact light touch sensor suitable for buildings that prioritize aesthetics and for locations requiring a narrow detection range. Being a built-in type without visible openings, it maintains the aesthetic of the building and contributes to energy-saving measures and infection control by reducing unnecessary door openings with its light touch function. When the light touch function is turned OFF, it can also be used as a built-in infrared sensor with a wide detection range. 【Features】 ■ Non-contact and hygienic ■ Flat design that preserves the aesthetics of the entrance ■ Adaptable to various door types with four detection range settings ■ Two-stage detection condition settings reduce unnecessary door openings and contribute to energy savings ■ Can also be used as an infrared sensor with a wide detection range *For more details, please refer to the PDF document or feel free to contact us.

• Area Sensor

Energy-saving measures and infection control measures too! Upgrade your facility environment with a non-contact light touch sensor.

The 『HA-T401』 is an automatic door sensor that opens only for people who want to enter, whether on a busy street or in a narrow passage, without any contact. Depending on the usage environment, the touch area can be set to four spots on the left, center, and right, as well as a total of twelve spots in four different configurations. The automatic door can be opened and closed simply by bringing a hand close, making it hygienic and safe without any touching. When the light touch function is turned OFF, it can also be used as a wide-detection infrared sensor without a lens, and the ON/OFF status of the light touch function can be confirmed by the color of the standby LED. 【Features】 ■ Adapts to various door types with four different spot settings ■ Addresses hygiene issues with a non-contact design ■ Two setting modes that reduce unnecessary door openings and contribute to energy savings ■ Can also be used as a lens-free infrared sensor *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Sensors

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x1, eDP x1, DP x1, HDMI x1 ● LAN x3, SATA 6Gb/s x1, 8-bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● M.2 2280 M-Key x1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.

Features: ● Equipped with Intel Core i3-N305 / Processor N97 ● DDR5 4800MHz SO-DIMM x1 slot (up to 16GB) (sold separately) ● LVDS Dual Channel 18/24 bit x1, VGA x1, HDMI x1 ● Intel 2.5GbE x2, SATA 6Gb/s x1, 8bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● Full size mPCIe/mSATA ● M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heatsink included * Memory, storage, and OS sold separately

Features: ● Equipped with Intel Core Ultra 5 225H/7 255H (Arrow Lake) ● DDR5 6400MHz dual-channel SODIMM x 2 (up to 96GB) (sold separately) ● LVDS x 1, eDP x 1, HDMI x 1 ● LAN x 3, SATA 6Gb/s x 1, 8-bit GPIO ● USB 3.2 Gen2 x 2, USB 2.0 x 4 ● M.2 2280 M-key x 1, M.2 3052 B-key x 1, M.2 2230 E-key x 1 ● Supports DC input of 9 to 36V ● Fan-equipped heat sink available separately GENE-MTH6-FAN: Heat sink with fan GENE-MTH6-HSP: Heat spreader (requires heat dissipation in the enclosure) * This model does not include OS/memory/storage.

Ejectors tend to be avoided due to their enormous consumption of compressed air. However, they also have many advantages, such as noise reduction, no heat generation, and no vibrations. When used properly, they can also achieve energy savings. ■ Space-saving, noise reduction, and heat prevention! Goodbye, electric pumps Large ejectors are ideal for replacing electric pumps. Their impact is significant and greatly contributes to improving the environment in manufacturing sites. Moreover, maintenance can be done without tools. For more details, visit: https://www.ipros.jp/catalog/detail/718575

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.