Exhibition Report on the "4th Data Center Construction and Operation Exhibition"

Packed with essential knowledge about earthquakes! Introducing the necessity and methods of earthquake preparedness!

After experiencing several major earthquakes, it is now recognized that earthquakes can occur anywhere in Japan. As a guideline for actions to take after an earthquake, it is necessary to prepare manuals that are tailored to the realities of companies, considering regional characteristics and industry specifics. However, creating an "earthquake-resistant office environment" to mitigate damage during disasters is a common challenge for all companies. First, we will introduce information that is useful for understanding the mechanisms of earthquakes, the actual damage, countermeasures, and implementation. - Seismic measures for computer equipment - Earthquake measures for free access floors - Seismic measures for communication equipment - Earthquake measures for 19-inch racks - Earthquake measures for OA equipment and furniture - Free access floor *Please refer to the catalog for more details.

• Vibration Monitoring

A compact seismic isolation device that can be freely adapted to existing locations.

A compact seismic isolation device that can be freely adapted to existing locations. ■Features■ ■ With a standby mode that has no start mechanism, it can respond immediately to seismic motion, providing significant effectiveness. ■ No construction is required; it can be implemented simply by placing it, and there is no need for a reset after an earthquake. ■ Easy installation during relocation or equipment expansion, and connections are possible. ■ Low friction resistance enables smooth damping. ■ Prevents twisting of the main body. ■ Prevents the main body from lifting. ■ Total thickness is only 90mm. ■ For more details, please contact us.

• Other safety equipment

Earthquake measures PA seismic frame

Earthquake measures are particularly necessary in computer rooms and communication equipment rooms. By providing seismic performance to the free access floor, we prevent shifting and collapse of the floor, protecting both the equipment and the free access floor! Directly fix the frame to the floor slab with anchors! PA-type seismic frame ■□■ Features ■□■ ■ By fixing the seismic reinforcement frame (V-shaped members) installed between the columns to the floor slab with anchors (Hilti), this method transmits horizontal forces to the floor surface. ■ Ideal for communication equipment rooms, computer rooms, and electronic calculation rooms. ■ Installation work Just like general free access floors, wiring for power and signal cables can be done, and installation is possible even while the equipment is in operation. ■ For more details, please contact us.

• Vibration Monitoring

Earthquake measures PB-type seismic frame

Earthquake measures are particularly necessary in computer rooms and communication equipment rooms. By providing seismic performance to the free access floor, we prevent shifts and collapses of the floor, protecting both the equipment and the free access floor! We interconnect the columns to fix them mutually, linking the entire floor like a single panel! PB-type seismic frame ■□■Features■□■ ■ The method fixes the columns mutually with horizontal bracing members, connecting the entire floor like a single panel and dispersing horizontal forces. ■ Seismic reinforcement is possible for existing free access floors without moving or stopping equipment, and without damaging the slab. ■ Installation work can be done similarly to general free access floors, allowing wiring for power and signal cables, and can be laid even while equipment is in operation. ■ Due to its unit structure, it can be easily installed on existing floors. ■ For more details, please contact us.

• Vibration Monitoring

Earthquake measures SD floor (SD method for equipment fixation)

Earthquake measures are particularly necessary in computer rooms and communication equipment rooms. We provide seismic performance for free access floors to prevent shifting and collapsing, protecting both the equipment and the free access floor! It functions as an integrated duct floor, securely fixing the floor and equipment to the building's floor with the SD-type equipment fixation method. ■□■ Features ■□■ ■ It functions as an integrated part of the duct floor, transmitting the combined forces acting on the free access floor during an earthquake, as well as the forces acting on the equipment fixation brackets trying to topple or move the equipment, to the building floor slab through the seismic frame. ■ Effective when anchor fixation is not possible. ■ Installation work can be done similarly to general free access floors, allowing for wiring of power and signal cables, and can be installed even while the equipment is operational. ■ Due to its unit structure, it can be easily installed on existing floors. ■ For more details, please contact us.

• Vibration Monitoring

Earthquake measures: duct floor (uplift prevention panel)

Earthquake measures are particularly necessary in computer rooms and communication equipment rooms. We provide seismic performance to free access floors to prevent shifting and collapsing, protecting both the equipment and the free access floor! Lock the panels to secure evacuation routes on the floor! Anti-lifting panels. ■□■ Features ■□■ ■ Anti-lifting panels to secure evacuation routes on the floor. ■ Greatly enhances the safety of operators during disasters, making evacuation easier under more severe conditions. ■ Locks can be applied with simple tools to prevent the panels from lifting. ■ Installation work can be done similarly to general free access floors, allowing wiring for power and signal cables, and can be laid even while equipment is operational. ■ Due to the unit structure, it can be easily installed on existing floors. ■ For more details, please contact us.

• Vibration Monitoring

Earthquake measures: Magic bands for OA equipment and peripheral devices.

In earthquake measures for information systems, while the main equipment is often addressed, the measures for computers and furniture tend to be overlooked. At Showden Corporation, to address this issue, we have prepared earthquake-resistant devices for OA equipment and furniture that can be easily installed with simple modifications on-site. We use materials that do not damage the target equipment, allowing for flexible responses to layout changes. Secure small devices within racks with bands to prevent movement and falling during an earthquake! Magic Band ■□■Features■□■ ■Belt for preventing movement of small devices such as modems and hubs within racks ■Can be cut to the desired length and easily adjusted for installation ■Velcro type for easy attachment and removal ■Length can be adjusted even if the dimensions of the equipment change, allowing for repeated use ■For more details, please contact us.

• Vibration Monitoring

Earthquake measures: Leveler holder for cabinets and printers

In earthquake measures for information systems, while the main equipment is often addressed, the measures for computers and furniture tend to be overlooked. At Showden, to address this issue, we have prepared seismic devices for OA equipment and furniture that can be easily installed with simple modifications on-site. We use materials that do not damage the target equipment and can freely accommodate layout changes. Stoppers for preventing movement and tipping of cabinets and printer equipment with levelers ■□■ Features ■□■ ■ Prevents horizontal movement by increasing the installation area of the leveler ■ Easy to install as it simply requires insertion under the leveler ■ Can also be used as a movement prevention holder for small casters ■ For more details, please contact us.

• Vibration Monitoring

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This is an introduction to "outer diameter film polishing," which is used for ultra-finish machining of various shaft-type workpieces. - Wouldn't you like to achieve ultra-finish machining more easily, safely, and with less variation? Please take a look at what film polishing is, along with related products and catalogs!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

We are pleased to announce that Tokyo Machine Works Co., Ltd. will be exhibiting at the "INNOVATION EXPO 2025" to be held at Tokyo Big Sight from September 10 (Wednesday) to September 12 (Friday), 2025. 【Exhibited Equipment】 - 1-ton portable autonomous mobile robot (AMR) - 2-ton portable unmanned transport vehicle (AGV) - Shutter-equipped unmanned transport vehicle - Autonomous cleaning robot, etc. 【Booth Number】 - 6-405 You will have the opportunity to see each machine up close, including demonstrations that link the equipment together. We sincerely look forward to your visit during this event. Please note that pre-registration (free of charge) is required to attend the exhibition, so we kindly ask you to register using the link below. https://www.logistech-online.com/jp/registration.php?exhibitor=EX000072 If you would like an invitation, please request it through our contact form.

Contec has added a BTO menu for the Windows 11-based embedded OS - Windows 11 IoT Enterprise LTSC 2024 to its industrial computer "MR4310 series" and has started accepting orders.