Free e-learning program "Basics of Plastic Molding"

We have a variety of series of plunger nozzles available!

This catalog features the "Plagate Nozzle" products from a company that handles hot runner molding equipment, LIM molding equipment, static eliminators, and more. It includes the "NH Series," which uses resin pressure and springs as power, the "AH Series," which enhances the fluidity of resin near the gate and has low residual stress, and the "GH Series," which pursues versatility and demonstrates effectiveness in various scenarios. [Contents] ■ Plagate Nozzle Products ■ Plagate Nozzle Parts *For more details, please contact us or download the catalog.

• nozzle
• Injection Molding Machine

Hot runner molding equipment that makes it easy to adjust weld lines and set up both large and small products.

The "VS Series" is a plunger gate air valve that allows for the adjustment of the opening and closing timing of each gate using a timing controller. The air cylinder is designed to be removable as a unit, and since it uses tubes and fittings for air piping, it offers excellent maintainability. With a wide variety of nozzle sizes and gate sizes available, it enhances productivity for molded products across a broad range of fields. 【Features】 ■ Stable quality reproducibility ■ Simplification of mold processing ■ Beautiful gate appearance quality ■ Good color changeability ■ Excellent maintainability *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• valve
• Other molds

FISA's unique valve nozzle!

This series is a plaguate nozzle that can enhance the fluidity of resin near the gate. The special shape of the piston tip ensures a reliable sealing mechanism for the gate, preventing any backflow of resin from the cavity. Additionally, it is maintenance-free and allows for long-term molding. 【Features】 ■ Prevention of resin backflow ■ Capability for long-term molding ■ Adoption of a unique opening and closing mechanism ■ Simple structure *For more details, please contact us or download the catalog.

• Other machine elements
• Injection Molding Machine

FISA's unique gate opening and closing system!

This series is a plunger gate nozzle powered by resin pressure and springs. It can be integrated into molds for thermoplastic resin injection molding, eliminating waste from sprues and runners during molding. Additionally, the nozzle mechanism adopts a unique valve gate system from FISA that automatically opens and closes the gate using resin pressure as power, without the need for external drive devices. 【Features】 ■ Good gate balance ■ Beautiful gate finish ■ The nozzle can be set at any angle *For more details, please contact us or download the catalog.

• Other machine elements
• Injection Molding Machine

Injection flow control unit that can be widely introduced to plug gates and open-type hot runners.

The "RCSS18" is a hot runner molding device that can be easily assembled to the manifold, allowing for simple adjustment of the resin flow rate at each gate. Pursuing our fundamental development concept of "anyone can use it easily and with versatility," we focused on the ability to vary the outflow rate. It can be widely implemented not only in a plastic gate system but also in open-type hot runners, contributing to the overall cost reduction related to molds, including hot runners. 【Features】 ■ Easy adjustment of flow rate at each gate with just one wrench ■ Durable due to its simple structure ■ Suitable distribution of resin volume with large and small set takes and family molds ■ Easy movement and adjustment of weld positions ■ No need for auxiliary equipment such as dedicated controllers *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Injection Molding Machine

Prevent scorching caused by residual resin materials! A hot runner molding device that achieves runnerless molding at a low cost.

The "GTH Series" is a plunger gate open nozzle that can suppress injection defects caused by gate clogging and the occurrence of cold slugs. Thanks to the effect of the built-in special chip, it reduces stringing and dripping. Direct gate settings to molded products are possible. It has a low number of parts, excellent maintainability, and is easy to integrate into molds. 【Features】 ■ Eliminates issues unique to open nozzles ■ Structure with no stagnant areas ■ Clean gate finish ■ Simple structure ■ Achieves runnerless molding at a low cost *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Other machine elements
• Other molds

Achieved complete runnerless design for super engineering plastics and biomass plastics, which have been considered difficult to convert to hot runner systems!

The "SEPT" hot runner system, compatible with super engineering plastics, significantly improves the long-standing issue of "uneven temperature distribution in nozzles" through a patented heating technology, making it suitable for resins with narrow temperature ranges, such as super engineering plastics and biomass plastics. By using wear-resistant materials for the parts, it can also reduce gate wear when working with glass fiber-reinforced resins. Additionally, by minimizing the size of the cylinder, it enables independent control of each gate with a minimum gate pitch of 30mm. Despite its compact design, the cylinder achieves a gate sealing force 3.5 times greater than conventional models by utilizing an oval shape and a double structure. *For more details, please refer to the PDF document or feel free to contact us.*

• Plastic Mould
• Injection Molding Machine

Thank you very much for your continued support. We sincerely apologize for the inconvenience, but our company will be closed for summer vacation during the following period. 【Closure Period】 From Saturday, August 9, 2025, to Thursday, August 14, 2025. We will resume normal business operations on Friday, August 15. We appreciate your understanding during this time and apologize for any inconvenience caused.

The following cameras are supported in the Elua 7.6 series. Product introduction: https://aileunsys.co.jp/b01_aileun.html Compatible camera list: https://aileunsys.co.jp/aileun/compatible_camera.html Newly added: - Manufacturer: DAHUA Model number (1 model): DH-IPC-HFW2449TLN-S-PRO

Dear Valued Customers, Thank you very much for your continued support. We would like to inform you that our company will be closed for summer vacation from Wednesday, August 13, 2025, to Friday, August 15, 2025. We will resume normal operations on Monday, August 18. We appreciate your understanding and cooperation.

Technoa Co., Ltd. (Headquarters: Gifu City, Gifu Prefecture, Representative Director: Koji Yamazaki) will hold a limited-time summer special event, "Monozukuri DX CAMP," from Saturday, August 9, 2025, to Saturday, August 23, 2025. Small and medium-sized manufacturing companies face challenges such as a shortage of specialized personnel and a lack of know-how and information, which act as barriers to promoting DX (digital transformation). This event will provide a step-by-step approach to "realistic DX," based on the know-how accumulated by Technoa while supporting the DX transformation of small and medium-sized manufacturing companies. It will be structured as DAY.1 to DAY.5, offering an opportunity for skill development during the summer break and supporting the learning and growth of small and medium-sized manufacturers. For more details, please refer to the related link.

JOHNAN has updated a webpage summarizing the selection points to solve various challenges in large-scale processing (quality maintenance, short delivery times, costs). This article introduces the challenges faced in large-scale processing based on years of knowledge and experience, as well as the key points for choosing the optimal contractor that balances quality and short delivery times. If you are looking for a reliable contractor, please make use of our "Large-Scale Processing Solutions." ▼For more details "Large-Scale Processing Solutions to Achieve Product Quality and Short Delivery Times" https://www.johnan.com/solution/process/processing-assembly/post_8.html