I received the Excellent Award at the 38th Electronics Packaging Society Spring Conference.

We will create new value through the mutual complementarity of ICT and BST.

In-circuit testing with a flying probe tester excels at inspecting the electrical characteristics of implemented electronic components in analog circuits. However, components that cannot be probed make electrical testing difficult, and functional testing of digital circuits is challenging. On the other hand, boundary scan testing allows for quick interconnection testing between LSI pins and on-board programming for FPGAs, but it can only test digital circuits around ICs that comply with the boundary scan standard, and it also requires specialized fixtures for connections. At Takaya Corporation, we possess technology that uses flying probes instead of fixtures to connect 4 to 5 scan-compatible pins and measuring instruments required for boundary scan testing. This allows for boundary scan testing even when the counterpart of a boundary scan-compliant IC is a non-boundary scan-compliant IC or passive components (such as connectors) by enabling the flying probe to function as a virtual boundary scan cell. With a single flying probe tester, it is possible to conduct comprehensive testing of both digital and analog circuits, thereby significantly enhancing testing efficiency compared to before.

• Circuit Board Inspection Equipment

It is a board inspection device capable of ultra-fast in-circuit testing at a top-class level in the industry.

We have completely revamped the platform compared to the conventional model, increasing the probe movement speed by up to 50% and dramatically improving contact position accuracy. With a new high-precision, wide-range measurement system that offers great flexibility and a groundbreaking 4-head 6-flying probe mechanism, we can significantly reduce inspection costs and enhance quality in the assembly process, regardless of substrate variety or production volume. ★You can bring your own substrates for evaluation tests at our demo rooms in Okayama headquarters and Tokyo branch★ We can conduct a series of tests, including creating inspection programs, inspecting using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Circuit Board Inspection Equipment

It is a board inspection device capable of ultra-fast in-circuit testing at a top-class industry level. (Supported board size for inspection: up to 985×610)

The APT-1340J maintains its basic performance while expanding the compatible board size to W635×D610mm. Additionally, by adding an optional split inspection function, it can inspect long boards up to W985×D610mm. It can accommodate components with a height of 60mm and board weights of up to 10kg, making it suitable for inspecting boards used in automotive, aerospace, and medical devices, as well as power boards and probe cards, which are larger and heavier. ★You can bring your boards to our demo room at our Okayama headquarters for evaluation tests★ We can conduct a series of tests including creating inspection programs, inspecting actual boards, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below. *For product information, please download the PDF or feel free to contact us.*

• Circuit Board Inspection Equipment

This is a flagship model that arranges probe heads on both the top and bottom, enabling simultaneous in-circuit testing of the front and back of the substrate.

Four probes are arranged on the top side of the substrate and two on the bottom side. Each probe can move freely and at high speed, achieving an astonishing inspection speed that is world-class in its category. By using the flying probes on both the top and bottom simultaneously, a combination inspection with up to six probes allows for simultaneous contact inspection at both points on the top and bottom sides of the substrate. This significantly expands the inspection range and further accelerates inspection time. It is equipped with a wealth of features and boasts world-class standards in speed and positioning accuracy. ★ You can bring your substrate to our demo room at our Okayama headquarters for evaluation testing ★ We can conduct a series of tests including the creation of inspection programs, inspections using actual substrates, and summarizing evaluation results. If you are interested, please apply through the 'Contact Us' section below.

• Circuit Board Inspection Equipment

The probe head is arranged above and below, allowing for simultaneous in-circuit testing of both sides of the substrate. (Supported substrate size for inspection: up to 985×610)

The simultaneous use of upper and lower flying probes enables a combination inspection of up to 6 probes, allowing for the inspection of components that can make contact at both points on the top and bottom of the substrate. This model boasts world-class standards in speed and positioning accuracy while expanding the compatible substrate size to W635×D610mm. Furthermore, by adding an optional split inspection function, it is capable of inspecting long substrates up to W985×D610mm. It can accommodate component heights of up to 60mm and substrate weights of up to 10kg, making it suitable for inspecting substrates used in automotive, aerospace, and medical devices, as well as power boards and probe cards, which are larger and heavier. ★Evaluation tests can be conducted by bringing your substrates to the demo room at our Okayama headquarters★ The entire process from creating inspection programs, inspecting using actual substrates, to summarizing evaluation results can be tested in a single flow. If you are interested, please apply through the 'Contact Us' section below.

• Circuit Board Inspection Equipment

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

We will be exhibiting jointly with Ando Corporation at the "22nd Pipe and Equipment Comprehensive Exhibition 2025 OSAKA," which will be held for three days from September 11 (Thursday) to September 13 (Saturday), 2025, at Intex Osaka, Hall 6A. Please be sure to stop by when you visit. 【Exhibition Schedule】 ● Environmentally friendly heat exchanger "Heat Recovery Heat Exchanger" ● Cut model of "Stainless Steel High Efficiency Heat Exchanger" ● Skeleton model of heating and cooling heat exchanger "SK Water Coil" ● Cooling heat exchanger "SK Water Coil Cartridge Type" ● Radiant heating pipe for space heating "SK Aerofin Tube" ◆ Event Dates: September 11 (Thursday) to September 13 (Saturday), 2025 10:00 AM to 5:00 PM (until 3:00 PM on the last day) ◆ Venue: Intex Osaka, Hall 6A Address: 1-5-102 Nanko-Kita, Suminoe-ku, Osaka City, Osaka Prefecture, 559-0034 Access: https://www.intex-osaka.com/jp/access/ ◆ Booth Number: 112 ◆ Admission Method: Pre-registration required (free) *Please check the official website for details.