KNF Explosion-Proof Pump

Acquired Japan's explosion-proof certification, allowing safe use for sampling and gas transfer of flammable gases including hydrogen gas.

- Explosion-proof structure electrical machinery and equipment type certification passed - Increased safety explosion-proof structure, pressure-resistant explosion-proof structure - Motor division grade: Ex II 2G Ex h IIB+H2 T4 Gb

• Other pumps

IECEx / ATEX certified explosion-proof pump can be used in environments with flammable gases. *This is not an explosion-proof certified product in Japan.

- Maximum allowable discharge pressure 12 bar (1.2 MPa) - Basic flow rate 30 l/min (50Hz) / 35 l/min (60Hz) - Corrosion-resistant specification SUS / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10^-3 mbar x l/s

• Other pumps

IECEx / ATEX certified explosion-proof pump can be used in environments with flammable gases. *This is not an explosion-proof certified product in Japan.

- Basic flow rate N922 8L: 7.5 l/min / N922 16L: 16 l/min - Achievable vacuum level 200-350 mbar abs - Maximum allowable discharge pressure 1.5 bar (0.15 MPa) - Corrosion-resistant specification PTFE - Robust design that withstands tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

• Other pumps

IECEx / ATEX certified explosion-proof pump can be used in environments with flammable gases. *This is not an explosion-proof certified product in Japan.

- Basic flow rate 7.5 l/min - Achievable vacuum level 140 mbar abs - Maximum allowable discharge pressure 1.5 bar (0.15 MPa) - Corrosion-resistant specification PVDF / PTFE - Robust design to withstand tough operating conditions - Leak-tight specification 6 x 10-3 mbar x l/s

• Other pumps

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

● What is a pneumatic regulator? It is a self-developed pneumatic regulator with a control reproducibility of ±0.1%. We offer a wide range of products from low flow to high flow. ● What is a regulator? Please use it to adjust the test pressure for leak testing. By supplying a stable test pressure, it enables more accurate measurements.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

This will provide a clear explanation from the basic comparison of CVD and PVD, to the applications of flow meters and pressure gauges, and further to the digitalization of process control and actual application examples. In today's society, where miniaturization and high performance are advancing, products around us, including mobile phones, are equipped with technologies that were once unimaginable. Supporting this evolution is thin film technology, which is utilized in various fields. **Main application areas of thin film technology:** - Microelectronics - Anti-reflective coatings for glass - Antibacterial metal coatings for medical devices - Flexible solar cells, etc. Thin film technology refers to the process of forming, coating, and processing thin film materials on objects referred to as substrate surfaces. In addition to a basic explanation of thin film technology, we will introduce a comparison of CVD and PVD, how to utilize flow meters and pressure gauges, and the benefits of digitalization in process control along with application examples. Please take a look at the related catalog. ★ Additionally, we are offering free materials on detailed explanations of CVD and PVD, as well as basic knowledge related to coatings for the glass industry. https://mono.ipros.com/news/detail/128269/

We are pleased to announce the 15th Meiden Online Seminar titled "Understanding Current Safety Management: Latest Trends in Legal Revisions, Risks, and On-Site Responses"! This time, we will welcome special lecturer Mr. Naki from Naki Labor Safety Consulting Office, who will give a lecture on important topics directly related to the field, such as "Strengthening Chemical Substance Management," "Heat Stroke Measures," and "Safety and Health Measures for Older Workers." ━━━【Online Seminar Overview━━━━━━━━━━━━━━━━━━━━━━━━━━━ Date and Time: March 9, 2026 (Monday) 13:30 - 14:30 Format: Online (Zoom) Content: 1. Safety seminar by Mr. Naki 2. Introduction of new content for Meiden VR Safety Experience Education 3. Product explanation of Safety Information Portal Participation Fee: Free Target Audience: Personnel in Safety Management, Quality Management, General Affairs, and On-Site Management Departments, etc.