Start handling 30.50mL all-plastic disposable syringes!

This is a silicone-free disposable syringe. It can be used as a syringe pump or syringe dispenser.

This is a disposable syringe. We will start handling all-plastic syringes in 30mL and 50mL sizes. 【Features】 ◆ Silicone-free ◆ Luer lock type ◆ Sterilized and individually packaged ◆ The 50mL type has enlarged capacity markings If you would like a sample, please feel free to contact us.

• Plastic utensils and containers

No risk of detachment of the tip and plunger! Each one can be used safely with individual blister pack packaging. Made by HENKE.

This is an all-plastic disposable syringe manufactured by Henke-Sass, Wolf in Germany. 【Features】 ◆ The barrel (outer tube) is made of polypropylene, and the plunger (piston part) is made of polyethylene. ◇ All-polyethylene integrated molded plunger 　→ There is no risk of detachment between the tip and the plunger. ◇ No rubber or silicone oil used 　→ There is no leaching caused by rubber or silicone oil. ◆ A special ring is applied at the top of the barrel to prevent the plunger from popping out. ◆ Two types available: a lure tip type that is easy to attach and detach, and a lure lock type that can be securely fixed (ISO594). ◆ EOG sterilized ◆ Convenient graduated capacity markings ◆ Each syringe is individually packaged in a blister pack. ◇ Protects the syringe from contamination by dust, dirt, and other undesirable substances in research and experiments. ◇ Syringes do not come into direct contact with each other. 　→ This prevents scratches on the barrel (outer tube) due to friction and wear on the markings, as well as damage to the barrel itself, allowing for safe use of each syringe. 【Medical Device Registration Number: 27B3X00265000001】

• Other physicochemical equipment
• Other laboratory equipment and containers

No risk of detachment of the tip and plunger! No concerns about leaching from rubber! Can be used as a syringe pump or syringe dispenser.

This is an all-plastic disposable syringe manufactured by Henke-Sass, Wolf in Germany. It features an integrated polyethylene plunger instead of a traditional plunger with a rubber tip, eliminating the risk of detachment between the tip and the plunger. There is no concern about the plunger popping out of the barrel, regardless of the back pressure. 【Features】 ◆ The barrel (outer tube) is made of polypropylene, and the plunger (piston part) is made of polyethylene. ◆ The all-polyethylene integrated plunger eliminates the risk of detachment between the tip and the plunger. ◆ A special ring is applied at the top of the barrel to prevent the plunger from popping out. ◆ No rubber or silicone oil is used, so there is no leaching caused by rubber or silicone oil. ◆ Available in two types: lure tip type and lure lock type (ISO594). ◆ Syringes from 2mL to 20mL come with convenient graduated capacity markings. ◆ Bulk pack (unwrapped). If you would like a sample, please feel free to contact us.

• Other physicochemical equipment
• Other laboratory equipment and containers

Air tightness, suction power, smooth sliding! Each one can be used with confidence thanks to the blister pack individual packaging. Made by HENKE.

This is a plastic disposable syringe manufactured by Henke-Sass, Wolf in Germany. 【Features】 ◆ 3-part disposable syringe ◇ The barrel (outer tube) is made of polypropylene ◇ The gasket at the tip of the plunger 　→ Ensures airtightness, suction power, and smooth sliding ◆ EOG sterilized ◆ Each syringe is individually packaged in a blister pack. ◇ Protects the syringe from contamination by dust and other undesirable particles in research and experiments ◇ Syringes do not come into direct contact with each other. 　→ Prevents scratches on the barrel (outer tube) due to friction and wear of the scale, as well as damage to the barrel itself, allowing for safe use of each syringe. 【1mL】 ◆ The plunger (piston part) is made of polystyrene. ◆ The plunger extends to the tip of the syringe 　→ A "zero dead volume type" that forces out the entire amount drawn in ◆ Securely fixed with a luer lock type (ISO594) 【100mL】 ◆ The 100mL size has been discontinued by the manufacturer.

• Other physicochemical equipment
• Other laboratory equipment and containers

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!